]> https://gitweb.dealii.org/ - dealii-svn.git/commitdiff
Remove old CVSROOT directory
authorbangerth <bangerth@0785d39b-7218-0410-832d-ea1e28bc413d>
Thu, 13 Jul 2006 09:56:38 +0000 (09:56 +0000)
committerbangerth <bangerth@0785d39b-7218-0410-832d-ea1e28bc413d>
Thu, 13 Jul 2006 09:56:38 +0000 (09:56 +0000)
git-svn-id: https://svn.dealii.org/trunk@13362 0785d39b-7218-0410-832d-ea1e28bc413d

CVSROOT/checkoutlist [deleted file]
CVSROOT/commitinfo [deleted file]
CVSROOT/cvswrappers [deleted file]
CVSROOT/editinfo [deleted file]
CVSROOT/loginfo [deleted file]
CVSROOT/modules [deleted file]
CVSROOT/notify [deleted file]
CVSROOT/rcsinfo [deleted file]
CVSROOT/taginfo [deleted file]

diff --git a/CVSROOT/checkoutlist b/CVSROOT/checkoutlist
deleted file mode 100644 (file)
index b04b350..0000000
+++ /dev/null
@@ -1,13 +0,0 @@
-# The "checkoutlist" file is used to support additional version controlled
-# administrative files in $CVSROOT/CVSROOT, such as template files.
-#
-# The first entry on a line is a filename which will be checked out from
-# the corresponding RCS file in the $CVSROOT/CVSROOT directory.
-# The remainder of the line is an error message to use if the file cannot
-# be checked out.
-#
-# File format:
-#
-#      [<whitespace>]<filename><whitespace><error message><end-of-line>
-#
-# comment lines begin with '#'
diff --git a/CVSROOT/commitinfo b/CVSROOT/commitinfo
deleted file mode 100644 (file)
index b19e7b7..0000000
+++ /dev/null
@@ -1,15 +0,0 @@
-# The "commitinfo" file is used to control pre-commit checks.
-# The filter on the right is invoked with the repository and a list 
-# of files to check.  A non-zero exit of the filter program will 
-# cause the commit to be aborted.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being committed to, relative
-# to the $CVSROOT.  For the first match that is found, then the remainder
-# of the line is the name of the filter to run.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".
diff --git a/CVSROOT/cvswrappers b/CVSROOT/cvswrappers
deleted file mode 100644 (file)
index 5047bf1..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
-# This file describes wrappers and other binary files to CVS.
-#
-# Wrappers are the concept where directories of files are to be
-# treated as a single file.  The intended use is to wrap up a wrapper
-# into a single tar such that the tar archive can be treated as a
-# single binary file in CVS.
-#
-# To solve the problem effectively, it was also necessary to be able to
-# prevent rcsmerge from merging these files.
-#
-# Format of wrapper file ($CVSROOT/CVSROOT/cvswrappers or .cvswrappers)
-#
-#  wildcard    [option value][option value]...
-#
-#  where option is one of
-#  -f          from cvs filter         value: path to filter
-#  -t          to cvs filter           value: path to filter
-#  -m          update methodology      value: MERGE or COPY
-#
-#  and value is a single-quote delimited value.
-#
-# For example:
diff --git a/CVSROOT/editinfo b/CVSROOT/editinfo
deleted file mode 100644 (file)
index d78886c..0000000
+++ /dev/null
@@ -1,21 +0,0 @@
-# The "editinfo" file is used to allow verification of logging
-# information.  It works best when a template (as specified in the
-# rcsinfo file) is provided for the logging procedure.  Given a
-# template with locations for, a bug-id number, a list of people who
-# reviewed the code before it can be checked in, and an external
-# process to catalog the differences that were code reviewed, the
-# following test can be applied to the code:
-#
-#   Making sure that the entered bug-id number is correct.
-#   Validating that the code that was reviewed is indeed the code being
-#       checked in (using the bug-id number or a seperate review
-#       number to identify this particular code set.).
-#
-# If any of the above test failed, then the commit would be aborted.
-#
-# Actions such as mailing a copy of the report to each reviewer are
-# better handled by an entry in the loginfo file.
-#
-# One thing that should be noted is the the ALL keyword is not
-# supported.  There can be only one entry that matches a given
-# repository.
diff --git a/CVSROOT/loginfo b/CVSROOT/loginfo
deleted file mode 100644 (file)
index 4120c5d..0000000
+++ /dev/null
@@ -1,35 +0,0 @@
-# The "loginfo" file is used to control where "cvs commit" log information is
-# sent.  The first entry on a line is a regular expression which is tested
-# against the directory that the change is being made to, relative to the
-# $CVSROOT.  For the first match that is found, the remainder of the line is a
-# filter program that should expect log information on its standard input
-#
-# If the repository name does not match any of the regular expressions in the
-# first field of this file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".
-#
-# The filter program may use one and only one "%s" modifier (ala printf).  If
-# such a "%s" is specified in the filter program, a brief title is included
-# (as one argument, enclosed in single quotes) showing the relative directory
-# name and listing the modified file names.
-#
-#
-DEFAULT                (echo $USER %s; date; cat) | /home/people/cvs/script/log.pl | cat - /home/people/cvs/.WWW/deal/LOG/default-`date '+%Y'`.html > /tmp/Tdefault; mv /tmp/Tdefault /home/people/cvs/.WWW/deal/LOG/default-`date '+%Y'`.html; chmod a+r /home/people/cvs/.WWW/deal/LOG/default-`date '+%Y'`.html
-#
-# The various DEAL libraries
-#
-^deal.II/base.*                (echo $USER %s; date; cat) | /home/people/cvs/script/log.pl | cat - /home/people/cvs/.WWW/deal/LOG/base-`date '+%Y'`.html > /tmp/Tbase; mv /tmp/Tbase /home/people/cvs/.WWW/deal/LOG/base-`date '+%Y'`.html; chmod a+r /home/people/cvs/.WWW/deal/LOG/base-`date '+%Y'`.html
-#
-^reports.*             (echo $USER %s; date; cat) | /home/people/cvs/script/log.pl | cat - /home/people/cvs/.WWW/deal/LOG/reports-`date '+%Y'`.html > /tmp/Treports; mv /tmp/Treports /home/people/cvs/.WWW/deal/LOG/reports-`date '+%Y'`.html; chmod a+r /home/people/cvs/.WWW/deal/LOG/reports-`date '+%Y'`.html
-#
-^tests.*               (echo $USER %s; date; cat) | /home/people/cvs/script/log.pl | cat - /home/people/cvs/.WWW/deal/LOG/tests-`date '+%Y'`.html > /tmp/Ttests; mv /tmp/Ttests /home/people/cvs/.WWW/deal/LOG/tests-`date '+%Y'`.html; chmod a+r /home/people/cvs/.WWW/deal/LOG/tests-`date '+%Y'`.html
-#
-^deal.II/lac.*         (echo $USER %s; date; cat) | /home/people/cvs/script/log.pl | cat - /home/people/cvs/.WWW/deal/LOG/lac-`date '+%Y'`.html > /tmp/Tlac; mv /tmp/Tlac /home/people/cvs/.WWW/deal/LOG/lac-`date '+%Y'`.html; chmod a+r /home/people/cvs/.WWW/deal/LOG/lac-`date '+%Y'`.html
-#
-^deal.II/deal.*                (echo $USER %s; date; cat) | /home/people/cvs/script/log.pl | cat - /home/people/cvs/.WWW/deal/LOG/deal-`date '+%Y'`.html > /tmp/Tdeal; mv /tmp/Tdeal /home/people/cvs/.WWW/deal/LOG/deal-`date '+%Y'`.html; chmod a+r /home/people/cvs/.WWW/deal/LOG/deal-`date '+%Y'`.html
-#
-^deal.II/doc.*         (echo $USER %s; date; cat) | /home/people/cvs/script/log.pl | cat - /home/people/cvs/.WWW/deal/LOG/doc-`date '+%Y'`.html > /tmp/Tdoc; mv /tmp/Tdoc /home/people/cvs/.WWW/deal/LOG/doc-`date '+%Y'`.html; chmod a+r /home/people/cvs/.WWW/deal/LOG/doc-`date '+%Y'`.html
-
-
diff --git a/CVSROOT/modules b/CVSROOT/modules
deleted file mode 100644 (file)
index 6998127..0000000
+++ /dev/null
@@ -1,27 +0,0 @@
-# Three different line formats are valid:
-#      key     -a    aliases...
-#      key [options] directory
-#      key [options] directory files...
-#
-# Where "options" are composed of:
-#      -i prog         Run "prog" on "cvs commit" from top-level of module.
-#      -o prog         Run "prog" on "cvs checkout" of module.
-#      -e prog         Run "prog" on "cvs export" of module.
-#      -t prog         Run "prog" on "cvs rtag" of module.
-#      -u prog         Run "prog" on "cvs update" of module.
-#      -d dir          Place module in directory "dir" instead of module name.
-#      -l              Top-level directory only -- do not recurse.
-#
-# NOTE:  If you change any of the "Run" options above, you'll have to
-# release and re-checkout any working directories of these modules.
-#
-# And "directory" is a path to a directory relative to $CVSROOT.
-#
-# The "-a" option specifies an alias.  An alias is interpreted as if
-# everything on the right of the "-a" had been typed on the command line.
-#
-# You can encode a module within a module by using the special '&'
-# character to interpose another module into the current module.  This
-# can be useful for creating a module that consists of many directories
-# spread out over the entire source repository.
-wholedeal &deal.II &tests
diff --git a/CVSROOT/notify b/CVSROOT/notify
deleted file mode 100644 (file)
index 34f0bc2..0000000
+++ /dev/null
@@ -1,12 +0,0 @@
-# The "notify" file controls where notifications from watches set by
-# "cvs watch add" or "cvs edit" are sent.  The first entry on a line is
-# a regular expression which is tested against the directory that the
-# change is being made to, relative to the $CVSROOT.  If it matches,
-# then the remainder of the line is a filter program that should contain
-# one occurrence of %s for the user to notify, and information on its
-# standard input.
-#
-# "ALL" or "DEFAULT" can be used in place of the regular expression.
-#
-# For example:
-#ALL mail %s -s "CVS notification"
diff --git a/CVSROOT/rcsinfo b/CVSROOT/rcsinfo
deleted file mode 100644 (file)
index 49e59f4..0000000
+++ /dev/null
@@ -1,13 +0,0 @@
-# The "rcsinfo" file is used to control templates with which the editor
-# is invoked on commit and import.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being made to, relative to the
-# $CVSROOT.  For the first match that is found, then the remainder of the
-# line is the name of the file that contains the template.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".
diff --git a/CVSROOT/taginfo b/CVSROOT/taginfo
deleted file mode 100644 (file)
index 274a46d..0000000
+++ /dev/null
@@ -1,20 +0,0 @@
-# The "taginfo" file is used to control pre-tag checks.
-# The filter on the right is invoked with the following arguments:
-#
-# $1 -- tagname
-# $2 -- operation "add" for tag, "mov" for tag -F, and "del" for tag -d
-# $3 -- repository
-# $4->  file revision [file revision ...]
-#
-# A non-zero exit of the filter program will cause the tag to be aborted.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being committed to, relative
-# to the $CVSROOT.  For the first match that is found, then the remainder
-# of the line is the name of the filter to run.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".

In the beginning the Universe was created. This has made a lot of people very angry and has been widely regarded as a bad move.

Douglas Adams


Typeset in Trocchi and Trocchi Bold Sans Serif.