]> https://gitweb.dealii.org/ - dealii.git/commitdiff
remove large output files from several steps
authorGuido Kanschat <dr.guido.kanschat@gmail.com>
Tue, 4 Dec 2012 17:42:19 +0000 (17:42 +0000)
committerGuido Kanschat <dr.guido.kanschat@gmail.com>
Tue, 4 Dec 2012 17:42:19 +0000 (17:42 +0000)
git-svn-id: https://svn.dealii.org/trunk@27755 0785d39b-7218-0410-832d-ea1e28bc413d

deal.II/examples/step-24/doc/results.dox
deal.II/examples/step-25/doc/results.dox
deal.II/examples/step-33/doc/results.dox

index ad2a9bba84ddf98fe8d05a2fffabd9b68e57c7aa..d3139965bc12f158c820017801f7fb15de9a1453 100644 (file)
@@ -16,7 +16,7 @@ This movie shows the thermoacoustic waves generated by a single small absorber
 propagating in the medium (in our simulation, we assume the medium is mineral
 oil, which has a acoustic speed of 1.437 $\frac{mm}{\mu s}$):
 
-@image html step-24.one_movie.gif
+<img src="http://www.dealii.org/images/steps/developer/step-24.one_movie.gif" alt="">
 
 For a single absorber, we of course have to change the
 <code>InitialValuesP</code> class accordingly.
@@ -30,7 +30,7 @@ microseconds running from left to right) using the source setup used in the
 program, to make things a bit more interesting compared to the present case of
 only a single source:
 
-@image html step-24.traces.png
+<img src="http://www.dealii.org/images/steps/developer/step-24.traces.png" alt="">
 
 One thing that can be seen, for example, is that the arrival of the second and
 fourth signals shifts to earlier times for greater detector numbers (i.e. the
@@ -49,10 +49,10 @@ weaker absorbing tissue:
 <TABLE WIDTH="100%">
 <tr>
 <td>
-@image html step-24.one.png
+<img src="http://www.dealii.org/images/steps/developer/step-24.one.png" alt="">
 </td>
 <td>
-@image html step-24.one_s.png
+<img src="http://www.dealii.org/images/steps/developer/step-24.one_s.png" alt="">
 </td>
 </tr>
 </table>
@@ -70,13 +70,13 @@ through the detector will therefore be filtered. By using a high-pass filter
 the simulated results can be made to look closer to the experimental
 data:
 
-@image html step-24.one_sf.png
+<img src="http://www.dealii.org/images/steps/developer/step-24.one_sf.png" alt="">
 
 In our simulations, we see spurious signals behind the main wave that
 result from numerical artifacts. This problem can be alleviated by using finer
 mesh, resulting in the following plot:
  
-@image html step-24.one_s2.png
+<img src="http://www.dealii.org/images/steps/developer/step-24.one_s2.png" alt="">
 
 
 
@@ -87,17 +87,17 @@ multiple absorbers. This corresponds to the case that is actually implemented
 in the program. The following movie shows the propagation of the generated
 thermoacoustic waves in the medium by multiple absorbers:
 
-@image html step-24.multi_movie.gif
+<img src="http://www.dealii.org/images/steps/developer/step-24.multi_movie.gif" alt="">
 
 Experimental data and our simulated data are compared in the following two
 figures:
 <TABLE WIDTH="100%">
 <tr>
 <td>
-@image html step-24.multi.png
+<img src="http://www.dealii.org/images/steps/developer/step-24.multi.png" alt="">
 </td>
 <td>
-@image html step-24.multi_s.png
+<img src="http://www.dealii.org/images/steps/developer/step-24.multi_s.png" alt="">
 </td>
 </tr>
 </table>
@@ -117,10 +117,10 @@ choosing a finer mesh (right):
 <TABLE WIDTH="100%">
 <tr>
 <td>
-@image html step-24.multi_sf.png
+<img src="http://www.dealii.org/images/steps/developer/step-24.multi_sf.png" alt="">
 </td>
 <td>
-@image html step-24.multi_s2.png
+<img src="http://www.dealii.org/images/steps/developer/step-24.multi_s2.png" alt="">
 </td>
 </tr>
 </table>
index e7e332e453a1aa6f8c4846c0009eddb0d4357e54..f8e8bdffb2401a62b42bbb0204a2ef833d5a5b14 100644 (file)
@@ -15,7 +15,7 @@ u_{\mathrm{breather}}(x,t) = -4\arctan \left(\frac{m}{\sqrt{1-m^2}} \frac{\sin\l
 \f]
 where $c_1$, $c_2$ and $m<1$ are constants. In the simulation below, we have chosen $c_1=0$, $c_2=0$, $m=0.5$. Moreover, it is know that the period of oscillation of the breather is $2\pi\sqrt{1-m^2}$, hence we have chosen $t_0=-5.4414$ and $t_f=2.7207$ so that we can observe three oscillations of the solution. Then, taking $u_0(x) = u_{\mathrm{breather}}(x,t_0)$, $\theta=0$ and $k=h/10$, the program computed the following solution.
 
-@image html step-25.1d-breather.gif "Animation of the 1D stationary breather." width=5cm
+<img src="http://www.dealii.org/images/steps/developer/step-25.1d-breather.gif" alt="Animation of the 1D stationary breather.">
 
 Though not shown how to do this in the program, another way to visualize the
 (1+1)-d solution is to use output generated by the DataOutStack class; it
@@ -24,7 +24,7 @@ allows to "stack" the solutions of individual time steps, so that we get
 solutions. This produces the space-time plot below instead of the animation
 above.
 
-@image html step-25.1d-breather_stp.png "A space-time plot of the 1D stationary breather." width=5cm
+<img src="http://www.dealii.org/images/steps/developer/step-25.1d-breather_stp.png" alt="A space-time plot of the 1D stationary breather.">
 
 Furthermore, since the breather is an analytical solution of the sine-Gordon
 equation, we can use it to validate our code, although we have to assume that
@@ -57,7 +57,7 @@ domain occur.
 
 The simulation shown below was performed with $u_0(x) = u_{\mathrm{kink}}(x,t_0)$, $\theta=\frac{1}{2}$, $k=20h$, $t_0=1$ and $t_f=500$. The $L^2$ norm of the error of the finite element solution at each time step remained on the order of $10^{-2}$, showing that the program is working correctly in 2D, as well as 1D. Unfortunately, the solution is not very interesting, nonetheless we have included a snapshot of it below for completeness.
 
-@image html step-25.2d-kink.png "Stationary 2D kink." width=5cm
+<img src="http://www.dealii.org/images/steps/developer/step-25.2d-kink.png" alt="Stationary 2D kink.">
 
 Now that we have validated the code in 1D and 2D, we move to a problem where the analytical solution is unknown.
 
@@ -73,7 +73,7 @@ and not the equation, thus picking a value of $\theta$ a good bit into
 the "exponentially damped" spectrum of the time stepping schemes
 assures these oscillations are not created.
 
-@image html step-25.2d-angled_kink.gif "Animation of a moving 2D kink, at 45 degrees to the axes of the grid, showing boundary effects." width=5cm
+<img src="http://www.dealii.org/images/steps/developer/step-25.2d-angled_kink.gif" alt="Animation of a moving 2D kink, at 45 degrees to the axes of the grid, showing boundary effects.">
 
 Another interesting solution to the sine-Gordon equation (which cannot be
 obtained analytically) can be produced by using two 1D breathers to construct
@@ -94,7 +94,7 @@ $k=10h$, $t_0=-5.4414$ and $t_f=2.7207$. The solution is pretty interesting
 --- it acts like a breather (as far as the pictures are concerned); however,
 it appears to break up and reassemble, rather than just oscillate.
 
-@image html step-25.2d-pseudobreather.gif "Animation of a 2D pseudobreather." width=5cm
+<img src="http://www.dealii.org/images/steps/developer/step-25.2d-pseudobreather.gif" alt="Animation of a 2D pseudobreather.">
 
 
 <a name="extensions"></a>
index 430e1a24235395fcb9c3aa4f4724d39dbd76281a..414e8e063ef15c1d202a5acd5dbf37fabc479a2f 100644 (file)
@@ -141,7 +141,7 @@ The result of running these computations is a bunch of output files that we
 can pass to our visualization program of choice. When we collate them into a
 movie, the results looks like this:
 
-@image html step-33.slide.gif
+<img src="http://www.dealii.org/images/steps/developer/step-33.slide.gif" alt="">
 
 As we see, the heavy mass of fluid is drawn down the slope by gravity, where
 it collides with the ski lodge and is flung into the air!  Hopefully everyone
@@ -149,7 +149,7 @@ escapes!
 
 We can also visualize the evolution of the adaptively refined grid:
 
-@image html step-33.slide_adapt.gif
+<img src="http://www.dealii.org/images/steps/developer/step-33.slide_adapt.gif" alt="">
 
 The adaptivity follows and precedes the flow pattern, based on the heuristic
 refinement scheme discussed above.

In the beginning the Universe was created. This has made a lot of people very angry and has been widely regarded as a bad move.

Douglas Adams


Typeset in Trocchi and Trocchi Bold Sans Serif.