verbose = off
+
+############################################################
+# First how to create executables, including all necessary
+# flags:
############################################################
-# First how to create output: by simply running a program.
+
+# If in multithread mode, add the ACE library to the libraries which
+# we need to link with:
+ifneq ($(with-multithreading),no)
+ LIBS += $(lib-ACE)
+endif
+
+flags = $(CXXFLAGS.g) $(CXXFLAGS) -Wno-missing-noreturn
+
+%.go : %.cc Makefile
+ @echo =====debug========= $<
+ @$(CXX) $(flags) -c $< -o $@
+%.exe :
+ @echo =====linking======= $@
+ @$(CXX) $(LDFLAGS) $(flags) -o $@ $^ $(LIBS)
+
+
+############################################################
+# Next how to create output: by simply running a program.
# Note that we normalize output to a few digits after
# the decimal punct, in order to be able to check across
# different platforms where we might differ in round-off etc.
############################################################
-%.output : %.testcase
+%.output : %.exe
@echo =====Running======= $<
@./$<
@perl -pi $(normalize) $@
+############################################################
+# After all these general rules, here is the target to be
+# executed by make: for each entry in the list $(tests)
+# perform a check.
+############################################################
+run-tests: $(tests:%=%.check)
+
+
+
+
############################################################
# Cleanup targets
############################################################
rm -f Makefile.depend *.o *.go *.output
veryclean: clean
- rm -f *.testcase *.inp *.gpl *.eps *.gnuplot
+ rm -f *.exe *.testcase *.inp *.gpl *.eps *.gnuplot
+
+
+
############################################################
# Automatic generation of dependencies
############################################################
-all-cc-files = $(shell echo *.cc)
-
-Makefile.depend: $(all-cc-files)
+Makefile.depend: $(shell echo *.cc)
@echo =====Dependencies== $@
@$(CXX) $(CXXFLAGS.g) $^ -M > $@
@perl -pi -e 's/(^[^.]+)\.o:/\1.o \1.go:/;' $@
+# Generated automatically from Makefile.in by configure.
############################################################
# $Id$
# Copyright (C) 2000, 2001 by the deal.II authors
############################################################
D = @DEAL2_DIR@
-
include $D/common/Make.global_options
-
-
-############################################################
-# Set debug-mode as a default
-############################################################
-
debug-mode = on
+libraries = $(lib-lac.g) \
+ $(lib-base.g)
-############################################################
-# Define library names
-############################################################
-
-libs.g = $(lib-lac.g) \
- $(lib-base.g)
-libs = $(lib-lac.o) \
- $(lib-base.o)
-
-
-############################################################
-# Select compiler flags according to debug-mode
-############################################################
-
-ifeq ($(debug-mode),on)
-libraries = $(libs.g)
-flags = $(CXXFLAGS.g) $(CXXFLAGS) -Wno-missing-noreturn
-endif
-
-ifeq ($(debug-mode),off)
-libraries = $(libs)
-flags = $(CXXFLAGS.o) $(CXXFLAGS) -Wno-missing-noreturn
-endif
-
-
-# If in multithread mode, add the ACE library to the libraries which
-# we need to link with:
-ifneq ($(with-multithreading),no)
- libraries += $(lib-ACE)
-endif
-
-
-%.go : %.cc Makefile
- @echo =====debug========= $<
- @$(CXX) $(flags) -c $< -o $@
-%.o : %.cc Makefile
- @echo =====optimized===== $<
- @$(CXX) $(flags) -c $< -o $@
-
-
-all: logtest.check reference.check tensor.check quadrature_test.check timer.check
-exe: $(all:.check=.testcase)
-output: $(all:.check=.output)
-
-abort.o : abort.cc
- @$(CXX) -c $< -o $@
-
-############################################################
-# Typical block for building a running program
-#
-# 1. provide a list of source files in ...-cc-files
-#
-# 2. generate the list of object files according to debug-mode
-#
-# 3. make executable
-#
-# 4. Explicit dependencies of object files (will be automatic soon)
-#
-############################################################
-
-logtest-cc-files = logtest.cc
-
-ifeq ($(debug-mode),on)
-logtest-o-files = $(logtest-cc-files:.cc=.go)
-else
-logtest-o-files = $(logtest-cc-files:.cc=.o)
-endif
-
-logtest.testcase: $(logtest-o-files) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) $(flags) -o $@ $^ $(LIBS)
-
-
-############################################################
-
-
-tensor-cc-files = tensor.cc
-
-ifeq ($(debug-mode),on)
-tensor-o-files = $(tensor-cc-files:.cc=.go)
-else
-tensor-o-files = $(tensor-cc-files:.cc=.o)
-endif
-
-tensor.testcase: $(tensor-o-files) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) $(flags) -o $@ $^ $(LIBS)
-
-
-
-############################################################
-
-
-reference-cc-files = reference.cc
-
-ifeq ($(debug-mode),on)
-reference-o-files = $(reference-cc-files:.cc=.go) abort.o
-else
-reference-o-files = $(reference-cc-files:.cc=.o) abort.o
-endif
-
-reference.testcase: $(reference-o-files) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) $(flags) -o $@ $^ $(LIBS)
-
-
-############################################################
-
-
-quadrature_test-cc-files = quadrature_test.cc
-
-ifeq ($(debug-mode),on)
-quadrature_test-o-files = $(quadrature_test-cc-files:.cc=.go)
-else
-quadrature_test-o-files = $(quadrature_test-cc-files:.cc=.o)
-endif
-
-quadrature_test.testcase: $(quadrature_test-o-files) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) $(flags) -o $@ $^ $(LIBS)
-
-
-############################################################
-
-
-timer-cc-files = timer.cc
-
-ifeq ($(debug-mode),on)
-timer-o-files = $(timer-cc-files:.cc=.go)
-else
-timer-o-files = $(timer-cc-files:.cc=.o)
-endif
-
-timer.testcase: $(timer-o-files) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) $(flags) -o $@ $^ $(LIBS)
-
+default: run-tests
############################################################
+logtest.exe : $(libraries) logtest.go
+polynomial_test.exe: $(libraries) polynomial_test.go
+quadrature_test.exe: $(libraries) quadrature_test.go
+reference.exe : $(libraries) reference.go abort.go
+tensor.exe : $(libraries) tensor.go
+timer.exe : $(libraries) timer.go
-polynomial_test-cc-files = polynomial_test.cc
-
-ifeq ($(debug-mode),on)
-polynomial_test-o-files = $(polynomial_test-cc-files:.cc=.go)
-else
-polynomial_test-o-files = $(polynomial_test-cc-files:.cc=.o)
-endif
-
-polynomial_test.testcase: $(polynomial_test-o-files) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) $(flags) -o $@ $^ $(LIBS)
+tests = logtest quadrature_test reference tensor timer
############################################################
-# Continue with other targets if needed
-############################################################
-
-
-target1-cc-files = t1.cc t2.cc t3.cc
-
-ifeq ($(debug-mode),on)
-target1-o-files = $(target1-cc-files:.cc=.go)
-else
-target1-o-files = $(target1-cc-files:.cc=.o)
-endif
-target1: $(target1-o-files) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) $(flags) -o $@ $^ $(LIBS)
include ../Makefile.rules
include Makefile.depend
+# Generated automatically from Makefile.in by configure.
############################################################
# $Id$
# Copyright (C) 2000, 2001 by the deal.II authors
############################################################
D = @DEAL2_DIR@
-
include $D/common/Make.global_options
-
-############################################################
-# Set debug-mode as a default
-############################################################
-
debug-mode = on
+libraries = $(lib-lac.g) \
+ $(lib-base.g)
+lib-1d = $(lib-deal2-1d.g)
+lib-2d = $(lib-deal2-2d.g)
+lib-3d = $(lib-deal2-3d.g)
-############################################################
-# Define library names
-############################################################
-
-libs.g = $(lib-deal2-2d.g) \
- $(lib-lac.g) \
- $(lib-base.g)
-libs = $(lib-deal2-2d.o) \
- $(lib-lac.o) \
- $(lib-base.o)
-
-
-############################################################
-# Select compiler flags according to debug-mode
-############################################################
-
-ifeq ($(debug-mode),on)
-libraries = $(libs.g)
-libdeal3d = $(lib-deal2-3d.g)
-libdeal1d = $(lib-deal2-1d.g)
-flags = $(CXXFLAGS.g) $(CXXFLAGS)
-endif
-
-ifeq ($(debug-mode),off)
-libraries = $(libs)
-libdeal3d = $(lib-deal2-3d.o)
-libdeal1d = $(lib-deal2-1d.o)
-flags = $(CXXFLAGS.o) $(CXXFLAGS)
-endif
-
-
-# If in multithread mode, add the ACE library to the libraries which
-# we need to link with:
-ifneq ($(with-multithreading),no)
- libraries += $(lib-ACE)
-endif
-
-
-%.go : %.cc Makefile
- @echo =====debug========= $<
- @$(CXX) $(flags) -c $< -o $@
-%.o : %.cc Makefile
- @echo =====optimized===== $<
- @$(CXX) $(flags) -c $< -o $@
-
-
-all: grid_test.check dof_test.check data_out.check \
- derivatives.check gradients.check \
- constraints.check mg.check mglocal.check \
- block_matrices.check second_derivatives.check \
- derivative_approximation.check matrices.check \
- error_estimator.check \
- intergrid_constraints.check intergrid_map.check wave-test-3.check
-
-exe: $(all:.check=.testcase) benchmark
-run: $(all:.check=.output)
-############################################################
-# Typical block for building a running program
-#
-# 1. provide a list of source files in ...-cc-files
-#
-# 2. generate the list of object files according to debug-mode
-#
-# 3. make executable
-#
-# 4. Explicit dependencies of object files (will be automatic soon)
-#
-############################################################
-
-template-cc-files = template.cc
-
-ifeq ($(debug-mode),on)
-template-o-files = $(template-cc-files:.cc=.go)
-else
-template-o-files = $(template-cc-files:.cc=.o)
-endif
-
-template.testcase: $(template-o-files) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
-
-
-############################################################
-
-constraints-cc-files = constraints.cc
-
-ifeq ($(debug-mode),on)
-constraints-o-files = $(constraints-cc-files:.cc=.go)
-else
-constraints-o-files = $(constraints-cc-files:.cc=.o)
-endif
-
-constraints.testcase: $(constraints-o-files) $(libdeal3d) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
-
-
-############################################################
-
-dof_test-cc-files = dof_test.cc
-
-ifeq ($(debug-mode),on)
-dof_test-o-files = $(dof_test-cc-files:.cc=.go)
-else
-dof_test-o-files = $(dof_test-cc-files:.cc=.o)
-endif
-
-dof_test.testcase: $(dof_test-o-files) $(libdeal3d) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
-
-
-############################################################
-
-
-data_out-cc-files = data_out.cc
-
-ifeq ($(debug-mode),on)
-data_out-o-files = $(data_out-cc-files:.cc=.go)
-else
-data_out-o-files = $(data_out-cc-files:.cc=.o)
-endif
-
-data_out.testcase: $(data_out-o-files) $(libdeal3d) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
-
-
-############################################################
-
-derivatives-cc-files = derivatives.cc
-
-ifeq ($(debug-mode),on)
-derivatives-o-files = $(derivatives-cc-files:.cc=.go)
-else
-derivatives-o-files = $(derivatives-cc-files:.cc=.o)
-endif
-
-derivatives.testcase: $(derivatives-o-files) $(libdeal1d) $(libdeal3d) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
-
-
-############################################################
-
-derivative_approximation-cc-files = derivative_approximation.cc
-
-ifeq ($(debug-mode),on)
-derivative_approximation-o-files = $(derivative_approximation-cc-files:.cc=.go)
-else
-derivative_approximation-o-files = $(derivative_approximation-cc-files:.cc=.o)
-endif
-
-derivative_approximation.testcase: $(derivative_approximation-o-files) $(libdeal1d) $(libdeal3d) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
-
-############################################################
-
-error_estimator-cc-files = error_estimator.cc
-
-ifeq ($(debug-mode),on)
-error_estimator-o-files = $(error_estimator-cc-files:.cc=.go)
-else
-error_estimator-o-files = $(error_estimator-cc-files:.cc=.o)
-endif
-
-error_estimator.testcase: $(error_estimator-o-files) $(libdeal1d) $(libdeal3d) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
-
-############################################################
-
-matrices-cc-files = matrices.cc
-
-ifeq ($(debug-mode),on)
-matrices-o-files = $(matrices-cc-files:.cc=.go)
-else
-matrices-o-files = $(matrices-cc-files:.cc=.o)
-endif
-
-matrices.testcase: $(matrices-o-files) $(libdeal1d) $(libdeal3d) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
-
-############################################################
-
-gradients-cc-files = gradients.cc
-
-ifeq ($(debug-mode),on)
-gradients-o-files = $(gradients-cc-files:.cc=.go)
-else
-gradients-o-files = $(gradients-cc-files:.cc=.o)
-endif
-
-gradients.testcase: $(gradients-o-files) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
-
-
-############################################################
-
-grid_test-cc-files = grid_test.cc
-
-ifeq ($(debug-mode),on)
-grid_test-o-files = $(grid_test-cc-files:.cc=.go)
-else
-grid_test-o-files = $(grid_test-cc-files:.cc=.o)
-endif
-
-grid_test.testcase: $(grid_test-o-files) $(libdeal3d) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
-
-
-############################################################
-
-grid_generator-cc-files = grid_generator.cc
-
-ifeq ($(debug-mode),on)
-grid_generator-o-files = $(grid_generator-cc-files:.cc=.go)
-else
-grid_generator-o-files = $(grid_generator-cc-files:.cc=.o)
-endif
-
-grid_generator.testcase: $(grid_generator-o-files) $(libdeal3d) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
-
-
-############################################################
-
-second_derivatives-cc-files = second_derivatives.cc
-
-ifeq ($(debug-mode),on)
-second_derivatives-o-files = $(second_derivatives-cc-files:.cc=.go)
-else
-second_derivatives-o-files = $(second_derivatives-cc-files:.cc=.o)
-endif
-
-second_derivatives.testcase: $(second_derivatives-o-files) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
-
-
-############################################################
-
-wave-test-3-cc-files = wave-test-3.cc
-
-ifeq ($(debug-mode),on)
-wave-test-3-o-files = $(wave-test-3-cc-files:.cc=.go)
-else
-wave-test-3-o-files = $(wave-test-3-cc-files:.cc=.o)
-endif
-
-wave-test-3.testcase: $(wave-test-3-o-files) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
-
-
-############################################################
-
-
-mglocal-cc-files = mglocal.cc
-
-ifeq ($(debug-mode),on)
-mglocal-o-files = $(mglocal-cc-files:.cc=.go)
-else
-mglocal-o-files = $(mglocal-cc-files:.cc=.o)
-endif
-
-mglocal.testcase: $(mglocal-o-files) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
-
-
+default: run-tests
############################################################
+block_matrices.exe : $(libraries) $(lib-2d) block_matrices.go
+constraints.exe : $(libraries) $(lib-2d) $(lib-3d) constraints.go
+data_out.exe : $(libraries) $(lib-2d) $(lib-3d) data_out.go
+derivative_approximation.exe : $(libraries) $(lib-1d) $(lib-2d) $(lib-3d) derivative_approximation.go
+derivatives.exe : $(libraries) $(lib-1d) $(lib-2d) $(lib-3d) derivatives.go
+dof_test.exe : $(libraries) $(lib-2d) $(lib-3d) dof_test.go
+error_estimator.exe : $(libraries) $(lib-1d) $(lib-2d) $(lib-3d) error_estimator.go
+gradients.exe : $(libraries) $(lib-2d) gradients.go
+grid_test.exe : $(libraries) $(lib-2d) $(lib-3d) grid_test.go
+intergrid_constraints.exe : $(libraries) $(lib-1d) $(lib-2d) $(lib-3d) intergrid_constraints.go
+intergrid_map.exe : $(libraries) $(lib-1d) $(lib-2d) $(lib-3d) intergrid_map.go
+matrices.exe : $(libraries) $(lib-1d) $(lib-2d) $(lib-3d) matrices.go
+mg.exe : $(libraries) $(lib-2d) mg.go
+mglocal.exe : $(libraries) $(lib-2d) mglocal.go
+second_derivatives.exe : $(libraries) $(lib-2d) second_derivatives.go
+wave-test-3.exe : $(libraries) $(lib-2d) wave-test-3.go
-mg-cc-files = mg.cc
-
-ifeq ($(debug-mode),on)
-mg-o-files = $(mg-cc-files:.cc=.go)
-else
-mg-o-files = $(mg-cc-files:.cc=.o)
-endif
-
-mg.testcase: $(mg-o-files) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
+tests = grid_test dof_test data_out derivatives gradients constraints mg \
+ mglocal block_matrices second_derivatives derivative_approximation \
+ matrices error_estimator intergrid_constraints intergrid_map \
+ wave-test-3
############################################################
-block_matrices-cc-files = block_matrices.cc
-
-ifeq ($(debug-mode),on)
-block_matrices-o-files = $(block_matrices-cc-files:.cc=.go)
-else
-block_matrices-o-files = $(block_matrices-cc-files:.cc=.o)
-endif
-
-block_matrices.testcase: $(block_matrices-o-files) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
-
-
-############################################################
-
-
-intergrid_map-cc-files = intergrid_map.cc
-
-ifeq ($(debug-mode),on)
-intergrid_map-o-files = $(intergrid_map-cc-files:.cc=.go)
-else
-intergrid_map-o-files = $(intergrid_map-cc-files:.cc=.o)
-endif
-
-intergrid_map.testcase: $(intergrid_map-o-files) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) -g -o $@ $^ $(lib-deal2-1d.g) $(lib-deal2-3d.g) $(LIBS)
-
-
-############################################################
-
-
-intergrid_constraints-cc-files = intergrid_constraints.cc
-
-ifeq ($(debug-mode),on)
-intergrid_constraints-o-files = $(intergrid_constraints-cc-files:.cc=.go)
-else
-intergrid_constraints-o-files = $(intergrid_constraints-cc-files:.cc=.o)
-endif
-
-intergrid_constraints.testcase: $(intergrid_constraints-o-files) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) -g -o $@ $^ $(lib-deal2-1d.g) $(lib-deal2-3d.g) $(LIBS)
-
-
-############################################################
-# Continue with other targets if needed
-############################################################
-
-
-benchmark-cc-files = benchmark.cc
-
-ifeq ($(debug-mode),on)
-benchmark-o-files = $(benchmark-cc-files:.cc=.go)
-else
-benchmark-o-files = $(benchmark-cc-files:.cc=.o)
-endif
-
-benchmark.testcase: $(benchmark-o-files) $(libraries)
- $(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
-
-############################################################
-# Continue with other targets if needed
-############################################################
-
-
-target1-cc-files = t1.cc t2.cc t3.cc
-
-ifeq ($(debug-mode),on)
-target1-o-files = $(target1-cc-files:.cc=.go)
-else
-target1-o-files = $(target1-cc-files:.cc=.o)
-endif
-
-target1: $(target1-o-files) $(libraries)
- $(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
-
-
-############################################################
-############################################################
include ../Makefile.rules
include Makefile.depend
+# Generated automatically from Makefile.in by configure.
############################################################
# $Id$
# Copyright (C) 2000, 2001 by the deal.II authors
############################################################
D = @DEAL2_DIR@
-
include $D/common/Make.global_options
-
-normalize = $D/common/scripts/normalize.pl
-
-############################################################
-# Set debug-mode as a default
-############################################################
-
debug-mode = on
+libraries = $(lib-deal2-1d.g) \
+ $(lib-deal2-2d.g) \
+ $(lib-deal2-3d.g) \
+ $(lib-lac.g) \
+ $(lib-base.g)
-############################################################
-# Define library names
-############################################################
+default: run-tests dat-checks
-libs.g = $(lib-deal2-1d.g) \
- $(lib-deal2-2d.g) \
- $(lib-deal2-3d.g) \
- $(lib-lac.g) \
- $(lib-base.g)
-libs = $(lib-deal2-1d.o) \
- $(lib-deal2-2d.o) \
- $(lib-deal2-3d.o) \
- $(lib-lac.o) \
- $(lib-base.o)
+# additional in this directory: some tests write more than one output
+# file. check these as well after all tests have been run. actually,
+# check each output file; files that are checked twice don't matter
+dat-checks: run-tests
+ @$(MAKE) `echo *.output | perl -pi -e 's/output/check/g;'`
-############################################################
-# Select compiler flags according to debug-mode
############################################################
-ifeq ($(debug-mode),on)
-libraries = $(libs.g)
-flags = $(CXXFLAGS.g) $(CXXFLAGS)
-endif
+derivatives.exe : $(libraries) derivatives.go
+fe_data_test.exe : $(libraries) fe_data_test.go
+mapping.exe : $(libraries) mapping.go
+mapping_c1.exe : $(libraries) mapping_c1.go
+shapes.exe : $(libraries) shapes.go
-ifeq ($(debug-mode),off)
-libraries = $(libs)
-flags = $(CXXFLAGS.o) $(CXXFLAGS)
-endif
-
-# If in multithread mode, add the ACE library to the libraries which
-# we need to link with:
-ifneq ($(with-multithreading),no)
- libraries += $(lib-ACE)
-endif
-
-
-
-%.go : %.cc Makefile
- @echo =====debug========= $<
- @$(CXX) $(flags) -g -c $< -o $@
-%.o : %.cc Makefile
- @echo =====optimized===== $<
- @$(CXX) $(flags) -g -c $< -o $@
-
-
-all: check
+tests = derivatives fe_data_test mapping mapping_c1 shapes
############################################################
-# Typical block for building a running program
-#
-# 1. provide a list of source files in ...-cc-files
-#
-# 2. generate the list of object files according to debug-mode
-#
-# 3. make executable
-#
-# 4. Explicit dependencies of object files (will be automatic soon)
-#
-############################################################
-
-fe_data_test-cc-files = fe_data_test.cc
-
-ifeq ($(debug-mode),on)
-fe_data_test-o-files = $(fe_data_test-cc-files:.cc=.go)
-else
-fe_data_test-o-files = $(fe_data_test-cc-files:.cc=.o)
-endif
-
-fe_data_test.testcase: $(fe_data_test-o-files) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
-
-############################################################
-
-shapes-cc-files = shapes.cc
-
-ifeq ($(debug-mode),on)
-shapes-o-files = $(shapes-cc-files:.cc=.go)
-else
-shapes-o-files = $(shapes-cc-files:.cc=.o)
-endif
-
-shapes.testcase: $(shapes-o-files) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
-
-############################################################
-
-derivatives-cc-files = derivatives.cc
-
-ifeq ($(debug-mode),on)
-derivatives-o-files = $(derivatives-cc-files:.cc=.go)
-else
-derivatives-o-files = $(derivatives-cc-files:.cc=.o)
-endif
-
-derivatives.testcase: $(derivatives-o-files) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
-
-############################################################
-
-embedding-cc-files = embedding.cc
-
-ifeq ($(debug-mode),on)
-embedding-o-files = $(embedding-cc-files:.cc=.go)
-else
-embedding-o-files = $(embedding-cc-files:.cc=.o)
-endif
-embedding: $(embedding-o-files) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) -g -o $@ $^
-
-############################################################
-
-interpolation-cc-files = interpolation.cc
-
-ifeq ($(debug-mode),on)
-interpolation-o-files = $(interpolation-cc-files:.cc=.go)
-else
-interpolation-o-files = $(interpolation-cc-files:.cc=.o)
-endif
-
-interpolation: $(interpolation-o-files) $(libraries)
- @$(CXX) $(LDFLAGS) -g -o $@ $^
-
-############################################################
-
-mapping-cc-files = mapping.cc
-
-ifeq ($(debug-mode),on)
-mapping-o-files = $(mapping-cc-files:.cc=.go)
-else
-mapping-o-files = $(mapping-cc-files:.cc=.o)
-endif
-
-mapping.testcase: $(mapping-o-files) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
-
-############################################################
-
-mapping_c1-cc-files = mapping_c1.cc
-
-ifeq ($(debug-mode),on)
-mapping_c1-o-files = $(mapping_c1-cc-files:.cc=.go)
-else
-mapping_c1-o-files = $(mapping_c1-cc-files:.cc=.o)
-endif
-
-mapping_c1.testcase: $(mapping_c1-o-files) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
-
-############################################################
-
-internals-cc-files = internals.cc
-
-ifeq ($(debug-mode),on)
-internals-o-files = $(internals-cc-files:.cc=.go)
-else
-internals-o-files = $(internals-cc-files:.cc=.o)
-endif
-
-internals: $(internals-o-files) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
-
-############################################################
-
-performance-cc-files = performance.cc
-
-ifeq ($(debug-mode),on)
-performance-o-files = $(performance-cc-files:.cc=.go)
-else
-performance-o-files = $(performance-cc-files:.cc=.o)
-endif
-
-performance: $(performance-o-files) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
-
-############################################################
-# Continue with other targets if needed
-############################################################
-
-check: fe_data_test.check mapping.check mapping_c1.check derivatives.check shapes.check
- @echo Checking results
- $(MAKE) dodiff
-
-dat = $(wildcard *.output)
-check = $(dat:.output=.check)
-
-dodiff: $(check)
include ../Makefile.rules
include Makefile.depend
-
-.PHONY: clean veryclean check
+# Generated automatically from Makefile.in by configure.
############################################################
# $Id$
# Copyright (C) 2000, 2001 by the deal.II authors
############################################################
D = @DEAL2_DIR@
-
include $D/common/Make.global_options
-
-
-############################################################
-# Set debug-mode as a default
-############################################################
-
debug-mode = on
+libraries = $(lib-lac.g) \
+ $(lib-base.g)
-############################################################
-# Define library names
-############################################################
-
-libs.g = $(lib-lac.g) \
- $(lib-base.g)
-libs = $(lib-lac.o) \
- $(lib-base.o)
-
-
-############################################################
-# Select compiler flags according to debug-mode
-############################################################
-
-ifeq ($(debug-mode),on)
-libraries = $(libs.g)
-flags = $(CXXFLAGS.g) $(CXXFLAGS) -Wno-missing-noreturn
-endif
-
-ifeq ($(debug-mode),off)
-libraries = $(libs)
-flags = $(CXXFLAGS.o) $(CXXFLAGS) -Wno-missing-noreturn
-endif
-
-# If in multithread mode, add the ACE library to the libraries which
-# we need to link with:
-ifneq ($(with-multithreading),no)
- libraries += $(lib-ACE)
-endif
-
-
-
-%.go : %.cc Makefile
- @echo =====debug========= $<
- @$(CXX) $(flags) -c $< -o $@
-%.o : %.cc Makefile
- @echo =====optimized===== $<
- @$(CXX) $(flags) -c $< -o $@
-
-
-# multigrid classes will be fixed.
-all: vector-vector.check block_vector.check block_matrices.check full_matrix.check solver.check
-exe: $(all:.check=.testcase) benchmark
-run: $(all:.check=.output)
-
-
-
-############################################################
-# Typical block for building a running program
-#
-# 1. provide a list of source files in ...-cc-files
-#
-# 2. generate the list of object files according to debug-mode
-#
-# 3. make executable
-#
-# 4. Explicit dependencies of object files (will be automatic soon)
-#
-############################################################
-
-vector-vector-cc-files = vector-vector.cc
-
-ifeq ($(debug-mode),on)
-vector-vector-o-files = $(vector-vector-cc-files:.cc=.go)
-else
-vector-vector-o-files = $(vector-vector-cc-files:.cc=.o)
-endif
-
-vector-vector.testcase: $(vector-vector-o-files) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
-
-
-############################################################
-
-block_matrices-cc-files = block_matrices.cc
-
-ifeq ($(debug-mode),on)
-block_matrices-o-files = $(block_matrices-cc-files:.cc=.go)
-else
-block_matrices-o-files = $(block_matrices-cc-files:.cc=.o)
-endif
-
-block_matrices.testcase: $(block_matrices-o-files) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
-
+default: run-tests
############################################################
-block_vector-cc-files = block_vector.cc
-
-ifeq ($(debug-mode),on)
-block_vector-o-files = $(block_vector-cc-files:.cc=.go) ../base/abort.o
-else
-block_vector-o-files = $(block_vector-cc-files:.cc=.o) ../base/abort.o
-endif
-
-block_vector.testcase: $(block_vector-o-files) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
-
-
-############################################################
-
-
-solver-cc-files = solver.cc testmatrix.cc
-
-ifeq ($(debug-mode),on)
-solver-o-files = $(solver-cc-files:.cc=.go)
-else
-solver-o-files = $(solver-cc-files:.cc=.o)
-endif
+block_matrices.exe : $(libraries) block_matrices.go
+block_vector.exe : $(libraries) block_vector.go abort.go
+full_matrix.exe : $(libraries) full_matrix.go
+solver.exe : $(libraries) solver.go testmatrix.go
+sparse_ilu.exe : $(libraries) sparse_ilu.go testmatrix.go
+vector-vector.exe : $(libraries) vector-vector.go
+#mgbase.exe : $(libraries) mgbase.go
+#mg.exe : $(libraries) mg.go testmatrix.go
-solver.testcase: $(solver-o-files) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
+tests = block_matrices block_vector full_matrix solver sparse_ilu vector-vector
############################################################
-sparse_ilu-cc-files = sparse_ilu.cc testmatrix.cc
-
-ifeq ($(debug-mode),on)
-sparse_ilu-o-files = $(sparse_ilu-cc-files:.cc=.go)
-else
-sparse_ilu-o-files = $(sparse_ilu-cc-files:.cc=.o)
-endif
-
-sparse_ilu.testcase: $(sparse_ilu-o-files) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
-
-
-############################################################
-
-
-full_matrix-cc-files = full_matrix.cc
-
-ifeq ($(debug-mode),on)
-full_matrix-o-files = $(full_matrix-cc-files:.cc=.go)
-else
-full_matrix-o-files = $(full_matrix-cc-files:.cc=.o)
-endif
-
-full_matrix.testcase: $(full_matrix-o-files) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
-
-
-
-############################################################
-
-
-mgbase-cc-files = mgbase.cc
-
-ifeq ($(debug-mode),on)
-mgbase-o-files = $(mgbase-cc-files:.cc=.go)
-else
-mgbase-o-files = $(mgbase-cc-files:.cc=.o)
-endif
-
-mgbase.testcase: $(mgbase-o-files) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
-
-
-
-############################################################
-
-
-mg-cc-files = mg.cc testmatrix.cc
-
-ifeq ($(debug-mode),on)
-mg-o-files = $(mg-cc-files:.cc=.go)
-else
-mg-o-files = $(mg-cc-files:.cc=.o)
-endif
-
-mg.testcase: $(mg-o-files) $(libraries)
- @echo =====linking======= $<
- @$(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
-
-
-
-############################################################
-# Continue with other targets if needed
-############################################################
-
-
-benchmark-cc-files = benchmark.cc
-
-ifeq ($(debug-mode),on)
-benchmark-o-files = $(benchmark-cc-files:.cc=.go)
-else
-benchmark-o-files = $(benchmark-cc-files:.cc=.o)
-endif
-
-benchmark.testcase: $(benchmark-o-files) $(libraries)
- $(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
-
-############################################################
-# Continue with other targets if needed
-############################################################
-
-
-target1-cc-files = t1.cc t2.cc t3.cc
-
-ifeq ($(debug-mode),on)
-target1-o-files = $(target1-cc-files:.cc=.go)
-else
-target1-o-files = $(target1-cc-files:.cc=.o)
-endif
-
-target1: $(target1-o-files) $(libraries)
- $(CXX) $(LDFLAGS) -g -o $@ $^ $(LIBS)
-
-
include ../Makefile.rules
include Makefile.depend