]> https://gitweb.dealii.org/ - dealii-svn.git/commitdiff
Refactor once more, finally get it working (a bit)
authormaier <maier@0785d39b-7218-0410-832d-ea1e28bc413d>
Tue, 20 Aug 2013 05:56:55 +0000 (05:56 +0000)
committermaier <maier@0785d39b-7218-0410-832d-ea1e28bc413d>
Tue, 20 Aug 2013 05:56:55 +0000 (05:56 +0000)
git-svn-id: https://svn.dealii.org/branches/branch_port_the_testsuite@30350 0785d39b-7218-0410-832d-ea1e28bc413d

15 files changed:
deal.II/CMakeLists.txt
deal.II/cmake/macros/macro_deal_ii_add_test.cmake
deal.II/cmake/scripts/normalize.pl [moved from tests/normalize.pl with 79% similarity]
deal.II/cmake/setup_cached_variables.cmake
tests/CMakeLists.txt
tests/Makefile.paths.in [deleted file]
tests/Makefile.rules [deleted file]
tests/configure [deleted file]
tests/configure.in [deleted file]
tests/hierarchy.pl [deleted file]
tests/report-build-tests.pl [deleted file]
tests/report-regression-tests.pl [deleted file]
tests/report.pl [deleted file]
tests/status_to_report.pl [deleted file]
tests/try_replace.sh [deleted file]

index 47240b388def51c62c8641e276d23b078ae7efd2..24e3e0da0e76bf5c55a9906fe785bfe3236e6b91 100644 (file)
@@ -145,7 +145,7 @@ ADD_SUBDIRECTORY(cmake/config) # has to be included after source
 ADD_SUBDIRECTORY(contrib) # has to be included after source
 ADD_SUBDIRECTORY(examples)
 
-IF(DEAL_II_HAVE_TESTS_DIRECTORY)
+IF(DEAL_II_COMPONENT_TESTSUITE AND DEAL_II_HAVE_TESTS_DIRECTORY)
   ENABLE_TESTING()
   ADD_SUBDIRECTORY(${TEST_DIR} ${CMAKE_BINARY_DIR}/tests)
 ENDIF()
index b4eb78c6bf91b91daac7689872f2eb123c43a71b..9968a5124e6e5ea6a2327cce2bec5377a1b4416b 100644 (file)
 ##
 ## ---------------------------------------------------------------------
 
+#
+# A Macro to set up tests for thes testsuite
+#
+# This macro assumes that a test
+#
+#   ./tests/category/test_name.cc
+#   ./tests/category/test_name.*.output
+#
+# is available in the testsuite.
+#
+# [configurations] is a list of configurations against this test should be
+# run. Possible values are an empty list, DEBUG, RELEASE or
+# "DEBUG;RELEASE".
+#
+# The following variables must be set:
+#
+# DEAL_II_TEST_DIFF
+#   - specifying the executable and command line of the diff command to use
+#
+# DEAL_II_TEST_TIME_LIMIT
+#   - specifying the maximal wall clock time in seconds a test is allowed
+#     to run
+#
+# TODO: LABEL and MEASUREMENT
 #
 # Usage:
 #     DEAL_II_ADD_TEST(category test_name [configurations])
@@ -54,8 +78,12 @@ MACRO(DEAL_II_ADD_TEST _category _test_name)
 
       ADD_CUSTOM_COMMAND(OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/${_test}/output
         COMMAND ${_test}
-        DEPENDS ${_test}
+        # TODO: Refactor:
+        COMMAND ${PERL_EXECUTABLE} -pi
+            ${CMAKE_SOURCE_DIR}/cmake/scripts/normalize.pl
+            ${CMAKE_CURRENT_BINARY_DIR}/${_test}/output
         WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/${_test}
+        DEPENDS ${_test} ${CMAKE_SOURCE_DIR}/cmake/scripts/normalize.pl
         )
       ADD_CUSTOM_TARGET(${_test}.run
         DEPENDS ${CMAKE_CURRENT_BINARY_DIR}/${_test}/output
@@ -63,7 +91,7 @@ MACRO(DEAL_II_ADD_TEST _category _test_name)
 
 
       ADD_CUSTOM_COMMAND(OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/${_test}/diff
-        COMMAND numdiff 
+        COMMAND ${DEAL_II_TEST_DIFF}
           ${CMAKE_CURRENT_BINARY_DIR}/${_test}/output
           ${CMAKE_CURRENT_SOURCE_DIR}/${_test_name}.output
           > ${CMAKE_CURRENT_BINARY_DIR}/${_test}/diff
@@ -83,9 +111,14 @@ MACRO(DEAL_II_ADD_TEST _category _test_name)
           -P ${CMAKE_SOURCE_DIR}/cmake/scripts/run_test.cmake
         WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/${_test}
         )
+      SET_TESTS_PROPERTIES(${_test} PROPERTIES
+        LABEL "${_category}"
+        TIMEOUT ${DEAL_II_TEST_TIME_LIMIT}
+        )
 
     ENDIF()
 
   ENDFOREACH()
 
 ENDMACRO()
+
similarity index 79%
rename from tests/normalize.pl
rename to deal.II/cmake/scripts/normalize.pl
index c11465152e3d677f05cbd3b2dde1620c48bcf3c6..2f08a93153e87c76e324152c6e9f4a4e04b070a6 100644 (file)
 #  small doubles
 ######################################################################
 
-# Remove absolute path names. Get the path to the testsuite from
-# the location of this script
-$D = $0;
-$D =~ s!tests/normalize.pl!!;
-s!$D!DEAL_II_PATH/!g;
-
 # Remove JobID
 
 s/JobId.*//;
@@ -37,20 +31,10 @@ s/by the deal.II library on.*//;
 
 s/line <\d+> of file <.*\//file </;
 
-# Make small exponentials zero
-
-#s/-?\d?\.\d+e-[123456789]\d+/0.00/g;
-
 # See if we have a -0.0... (not followed by any other digit) and replace it
 # by the same number without the negative sign
 s/-0\.(0+)(?!\d)/0.\1/g;
 
-# Residual values
-
-#s/value.*//;
-#s/with residual.*//;
-
-
 # remove deal.II debug output
 s/^DEAL.*::_.*\n//g;
 
index c2e04fe20dd5c0cc5913c5f17187c8d2a94adb6c..e5391d5fc822df537178cd3d418e1769b9b53c01 100644 (file)
@@ -28,6 +28,7 @@
 #     DEAL_II_COMPONENT_EXAMPLES
 #     DEAL_II_COMPONENT_MESH_CONVERTER
 #     DEAL_II_COMPONENT_PARAMETER_GUI
+#     DEAL_II_COMPONENT_TESTSUITE
 #     DEAL_II_FORCE_AUTODETECTION
 #
 # Options regarding compilation and linking:
@@ -93,6 +94,13 @@ OPTION(DEAL_II_COMPONENT_PARAMETER_GUI
   OFF
   )
 
+IF(DEAL_II_HAVE_TESTS_DIRECTORY)
+  OPTION(DEAL_II_COMPONENT_TESTSUITE
+    "Setup the full testsuite. TODO"
+    OFF
+    )
+ENDIF()
+
 OPTION(DEAL_II_ALLOW_AUTODETECTION
   "Allow to automatically setup features by setting all undefined DEAL_II_WITH_* variables to ON or OFF"
   ON
index 7dea0b5c3359c4daeeaf73883d200680b4e23df0..a421bbc5c9ee2181bcbdc925ebedca6b5122d464 100644 (file)
@@ -1,6 +1,66 @@
-MESSAGE(STATUS "Registering tests")
+## ---------------------------------------------------------------------
+## $Id$
+##
+## Copyright (C) 2013 by the deal.II authors
+##
+## This file is part of the deal.II library.
+##
+## The deal.II library is free software; you can use it, redistribute
+## it, and/or modify it under the terms of the GNU Lesser General
+## Public License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+## The full text of the license can be found in the file LICENSE at
+## the top level of the deal.II distribution.
+##
+## ---------------------------------------------------------------------
 
-ADD_SUBDIRECTORY(base)
+#
+# Setup and run the testsuite:
+#
+# TODO: Describe and document the following:
+# DEAL_II_TEST_DIFF
+# DEAL_II_TEST_TIME_LIMIT
+# NUMDIFF_DIR
+#
+
+#
+# We need perl for the testsuite:
+#
+FIND_PACKAGE(Perl)
+IF(NOT PERL_FOUND)
+  MESSAGE(FATAL_ERROR
+    "Could not find a perl installation which is required for running the test suite"
+    )
+ENDIF()
+
+#
+# And a diff tool, preferably numdiff:
+#
+FIND_PROGRAM(NUMDIFF_EXECUTABLE
+  NAMES numdiff
+  HINTS ${NUMDIFF_DIR}
+  PATH_SUFFIXES bin
+  )
+FIND_PROGRAM(DIFF_EXECUTABLE
+  NAMES diff
+  )
+IF( NUMDIFF_EXECUTABLE MATCHES "-NOTFOUND"
+    AND DIFF_EXECUTABLE MATCHES "-NOTFOUND" )
+  MESSAGE(FATAL_ERROR
+    "Could not find diff or numdiff. One of those are required for running the testsuite."
+    )
+ENDIF()
+
+IF(NOT NUMDIFF_EXECUTABLE MATCHES "-NOTFOUND")
+  SET_IF_EMPTY(DEAL_II_TEST_DIFF numdiff -a 1e-6 -q -s ' \t\n:')
+ELSE()
+  SET_IF_EMPTY(DEAL_II_TEST_DIFF diff)
+ENDIF()
 
-#ADD_SUBDIRECTORY(bits)
-#ADD_SUBDIRECTORY(fe)
+#
+# Set a default time limit of 60 seconds:
+#
+SET_IF_EMPTY(DEAL_II_TEST_TIME_LIMIT 60)
+
+
+ADD_SUBDIRECTORY(base)
diff --git a/tests/Makefile.paths.in b/tests/Makefile.paths.in
deleted file mode 100644 (file)
index 4ffeab4..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
-# File only holding those definitions in the Makefiles of the subdirs
-# which are changed by the ./configure file.
-
-D = @DEAL_II_DIR@
-
-# Set debug mode to link against the correct library:
-debug-mode = on
-
-TEST_MINUS_L = @TEST_MINUS_L@
-ULIMIT = @ULIMIT@
-
-# however, also define a variable that identifies the current directory,
-# including if necessary a description of the branch we are on. we put
-# this into Makefile.paths because not all */Makefile files include
-# Makefile.rules (e.g. not the ones in all-headers or mesh-conversion)
-# but they do generally include the current file
-#
-# so get the path of the current directory so we can prefix every test
-# in the report with it. for a branch, prefix everything
-# with x-branch-name/ so that tests run from the branch will show up
-# in different folders on the webpage.
-WORKDIR = $(notdir $(shell pwd))
diff --git a/tests/Makefile.rules b/tests/Makefile.rules
deleted file mode 100644 (file)
index b918acc..0000000
+++ /dev/null
@@ -1,336 +0,0 @@
-######################################################################
-# Makefile.rules,v 1.11 2001/04/24 13:18:09 wolf Exp
-#
-# Copyright (C) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, the deal.II authors
-#
-# Common make rules for test files. To be included by the Makefiles
-# in the subdirectories.
-######################################################################
-
-
-# reference the normalization script in the tests directory, which is
-# one up from where the variable will be expanded
-normalize = $(shell cd .. && pwd)/normalize.pl
-
-verbose = off
-
-# The mail program. Override this by something like
-#
-# MAIL=mymailprog
-#
-# as part of the 'make' arguments or in the environment to use a different
-# mail agent or to tunnel through ssh.  The mail program takes a single
-# argument, which is the mail address for tests The contents of the mail will
-# be provided on STDIN
-MAIL ?= mail
-
-# this lets you overwrite the diff tool for comparisons.
-# recommended environment setting:
-#   export DEAL_II_DIFF="numdiff -a 1e-6 -q -s ' \t\n:'"
-DEAL_II_DIFF ?= diff
-
-PLATFORM = $(TARGET)+$(GXX-VERSION:intel_%=%)
-PLATFORM-HIERARCHY = $(shell $(PERL) ../hierarchy.pl $(PLATFORM))
-
-ID = `id -un`"@"`hostname`
-
-############################################################
-# First how to create object files, including all necessary
-# flags. Before we start the compilation, write the status
-# of the next operation into the test/status file. If these
-# are MPI tests, also remove all status files from the
-# test/ncpus_*/ directories
-############################################################
-
-flags     = $(CXXFLAGS.g)
-
-ifeq ($(findstring gcc,$(GXX_VERSION)),gcc)
-flags += -Wno-missing-noreturn
-endif
-
-%/obj.g.$(OBJEXT) : %.cc
-       @echo =====debug========= $<
-       @echo Compiling > $(dir $@)/status
-       @-rm -f $(dir $@)/ncpu*/status
-       @$(CXX) $(flags) -c $< -o $@
-
-%/obj.$(OBJEXT) : %.cc
-       @echo =====optimized===== $<
-       @echo Compiling > $(dir $@)/status
-       @-rm -f $(dir $@)/ncpu*/status
-       @$(CXX) $(CXXFLAGS.o) -c $< -o $@
-
-######################################################################
-# Don't put $(libraries) into this line since it is already in $^
-######################################################################
-%/exe : %/obj.g.$(OBJEXT)
-       @echo =====linking======= $@
-       @echo Linking > $(dir $@)/status
-       @$(CXX) -o $@ $^ $(LDFLAGS) $(LIBS)
-
-
-############################################################
-# Next how to create output: by simply running a program.
-# Note that we normalize output to a few digits after
-# the decimal punct, in order to be able to check across
-# different platforms where we might differ in round-off etc.
-#
-# Since the test suite is usually run automatically, we
-# impose a maximum run time of 30 CPU minutes for each
-# program.
-#
-# In the line after we execute the program, we make sure that
-# the program terminated without error code; otherwise delete
-# the output file and stop the make command. This is done so
-# that when you run make for that output file again later
-# then make would not say that the output file is up to
-# date and does not need to be regenerated
-############################################################
-
-ifndef OVERRIDE_OUTPUT_RULE
-%/output : %/exe
-       @echo =====Running======= $<
-       @echo Running > $(dir $@)/status
-       @$(ULIMIT) -t $(if $(ULIMIT_LIMIT),$(ULIMIT_LIMIT),600) ; \
-         export WALLTIME=3600 ; \
-         ./$< ; \
-         if test ! $$? = 0 ; then rm $@ ; false ; fi
-       @perl -pi $(normalize)  $@
-endif
-
-
-############################################################
-# Postprocessing the output: compare with precomputed
-# files. In default mode, do not show diffs as they are
-# usually overly verbose. Only if user calls `make' with
-# flag `verbose=on' show the diffs. Also note that we
-# usually let the call to `make' continue even if we
-# find a difference, since the output is clearly marked
-# as a failing test and we normally want to see the results
-# of all tests at once, including those that come after
-# the failed one.
-#
-# if, however, the flag `stop_on_error=on' was given, the
-# check command fails whenever the output differs from the
-# precomputed file.
-#
-# as to finding which output file to compare with: we simply
-# walk the list of files created by the ./hierarchy.pl file
-# and take the first one.
-############################################################
-
-
-%/OK : %/output
-       @echo '=====Checking======' $<
-       @echo Checking > $(dir $@)/status
-       @$(PERL) -pi $(normalize)  $<
-       @for i in $(PLATFORM-HIERARCHY) ; do \
-           testname=$(<:%/output=%) ; \
-           if test -f $$testname/cmp/$$i ; then \
-               cmpfile_found=yes ; \
-               if test "x$(verbose)" = "xon" ; then \
-                       cmd="$(DEAL_II_DIFF) $(DIFFOPT) $< $$testname/cmp/$$i" ; \
-                else \
-                       cmd="$(DEAL_II_DIFF) $< $$testname/cmp/$$i > /dev/null" ; \
-                fi ; \
-                if eval $$cmd ; then \
-                       echo '=====OK============' $@ ; \
-                       echo 'diff ok' > $(dir $@)/status ; \
-                       echo $$i > $@ ; \
-                else \
-                       if test "x$(verbose)" = "xon" ; then \
-                               echo '+++++Error+++++++++' $@ " ($$testname/cmp/$$i)" ; \
-                       else \
-                               echo '+++++Error+++++++++' $@ "($$testname/cmp/$$i) Use make verbose=on for the diffs" ; \
-                       fi ; \
-                       if test "x$(stop_on_error)" = "xon" ; then \
-                               exit 1 ; \
-                       fi ; \
-                fi ; \
-                break ; \
-           fi ; \
-         done && \
-         if test "x$$cmpfile_found" != "xyes" ; then \
-               echo "*** No suitable file in $$testname/cmp found! ***" ; \
-               false ; \
-         fi
-
-default: run-tests
-
-############################################################
-# Generate a report for the present date, in which the
-# results (indicated by a "+" for a successful test, and a
-# "-" for a failing one) for all tests is summarized. Use
-# universal time in order to be able to run this target
-# anywhere anytime
-#
-# in the mpi directory, we may find the situation that a
-# test did not compile. in that case, there is no 'status'
-# file in the xx/ncpu_4/ directory, but one in xx/ (because
-# we never made it to the stage where we run things in
-# parallel). If that is the case, then try to find the other
-# file
-############################################################
-report:
-       @-$(MAKE) -k run-tests
-       @-svn info . | grep '^Revision'
-       @echo 'Date: ' `date -u +"%Y %j  %F  %U-%w"`
-       @echo 'Id: ' $(ID)
-       @for test in $(sort $(tests)) ; do \
-         case $$test in \
-            *ncpu_*) \
-               if test -f $$test/status ; then \
-                  file=$$test/status ; \
-                else \
-                 file=`echo $$test | $(PERL) -pi -e 's/ncpu_\d+//g;'`/status ; \
-               fi ; \
-               ;; \
-           *) \
-               file=$$test/status ; \
-               ;; \
-         esac ; \
-         echo `date -u +"%Y-%m-%d %H:%M"` \
-               "`perl ../status_to_report.pl $$file`" \
-               "`echo $(WORKDIR)/$$test | sed s#/ncpu#---ncpu#g`" ; \
-       done
-
-
-status=Compiling Linking Running Checking diff all
-
-summary:
-       @for curstatus in $(status) ; do \
-         counter=0 ; \
-         all=0 ; \
-         for test in $(sort $(tests)) ; do \
-            case $$test in \
-               *ncpu_*) \
-                if test -f $$test/status ; then \
-                   file=$$test/status ; \
-                 else \
-                  file=`echo $$test | $(PERL) -pi -e 's/ncpu_\d+//g;'`/status ; \
-               fi ; \
-               ;; \
-           *) \
-               file=$$test/status ; \
-               ;; \
-         esac ; \
-         curcount=`if test -f $$file ; then grep -c $$curstatus $$file;else echo 0;fi;`; \
-         all=$$(($$all+1));\
-         counter=$$(($$counter+$$curcount)); \
-       done; \
-       if test "$$curstatus" = "all"; then printf "%s\t" $$all; \
-       else if test "$$curstatus" = "diff"; then printf "%s\t" $$counter; \
-       else if test "$$counter" != "0"; then printf "%s\t" $$counter; \
-       else printf "%s\t" $$counter ; fi;fi;fi;\
-       done;\
-       printf "\n";
-
-report+mail:
-       @$(MAKE) report | tee testresults
-       @cat testresults | $(MAIL) dealii.regression.tests@gmail.com
-       @rm testresults
-
-######################################################################
-# Update a reference file
-######################################################################
-%/update: %/output
-         @../try_replace.sh $(@D)
-
-
-############################################################
-# Generating references: Useful when creating references for
-# a new platform or when updating several non-generic
-# references.
-############################################################
-%/ref : %/output
-       @$(PERL) -pi $(normalize)  $<
-       @for i in $(PLATFORM-HIERARCHY) ; do \
-           testname=$(<:%/output=%) ; \
-           if test -f $$testname/cmp/$$i ; then \
-               cmd="diff $< $$testname/cmp/$$i > /dev/null" ; \
-               if eval ! $$cmd ; then \
-                   echo '=====Creating======' $$testname/cmp/$(PLATFORM) ; \
-                   cp $$testname/output $$testname/cmp/$(PLATFORM); \
-               fi ; \
-               break ; \
-           fi ; \
-         done
-
-############################################################
-# all .cc-files are tests by default. After that, find out which tests
-# require unconfigured prerequisites and eliminate those.
-# We first test if $tests exists and in this case do not do anything.
-ifeq ($(tests),)
-  tests_all = $(wildcard *.cc)
-  ifeq ($(USE_CONTRIB_PETSC),no)
-    tests1 = $(foreach file, $(tests_all), $(shell grep -L PETScWrappers $(file)))
-  else
-    tests1 = $(tests_all)
-  endif
-
-  ifeq ($(USE_CONTRIB_TRILINOS),no)
-    tests2 = $(foreach file, $(tests1), $(shell grep -L TrilinosWrappers $(file)))
-  else
-    tests2 = $(tests1)
-  endif
-
-  tests_cc = $(tests2)
-  tests = $(basename $(tests2))
-endif
-
-############################################################
-# link with all libraries:
-libraries = $(lib-deal2.g)
-libraries_o = $(lib-deal2.o)
-
-############################################################
-# After all these general rules, here is the target to be
-# executed by make: for each entry in the list $(tests)
-# perform a check.
-############################################################
-run-tests: $(tests:%=%/OK)
-
-output: $(tests:%=%/output)
-
-build: $(tests:%=%/exe)
-
-refs: $(tests:%=%/ref)
-
-update: $(tests:%=%/update)
-
-############################################################
-# Cleanup targets
-############################################################
-
-clean:
-       -rm -f Makefile.depend Makefile.*tests */obj.$(OBJEXT) \
-               */obj.g.$(OBJEXT) */output *~ */*.vtu */*.pvtu */*visit \
-               */status */*/OK */OK \
-               */ncpu*/status
-
-distclean: clean
-       -rm -f */exe *.testcase *.gpl *.eps *.gnuplot
-
-
-show-tests:
-       @echo $(tests)
-
-############################################################
-# Automatic generation of dependencies
-############################################################
-
-Makefile.depend: $(shell echo *.cc)
-       @echo =====Dependencies== $@
-       @$D/common/scripts/make_dependencies $(INCLUDE) $^ > $@ \
-               || (rm -f $@ ; false)
-       @$(PERL) -pi -e 's#\.((g\.)?$(OBJEXT):)#/obj.\1#g;' $@
-
-Makefile.tests: Makefile $(shell echo *.cc)
-       @echo =====Targets======= $@
-       @for i in $(tests) ; do \
-               echo "$$i/exe : $$i/obj.g.\$$(OBJEXT) \$$(libraries)"; \
-        done \
-               > $@
-
-
-.PHONY: report show-tests clean distclean summary %/ref
diff --git a/tests/configure b/tests/configure
deleted file mode 100755 (executable)
index fe6b373..0000000
+++ /dev/null
@@ -1,2780 +0,0 @@
-#! /bin/sh
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.68.
-#
-#
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
-# Foundation, Inc.
-#
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in #(
-  *posix*) :
-    set -o posix ;; #(
-  *) :
-     ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
-    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='print -r --'
-  as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='printf %s\n'
-  as_echo_n='printf %s'
-else
-  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
-    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
-    as_echo_n='/usr/ucb/echo -n'
-  else
-    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
-    as_echo_n_body='eval
-      arg=$1;
-      case $arg in #(
-      *"$as_nl"*)
-       expr "X$arg" : "X\\(.*\\)$as_nl";
-       arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
-      esac;
-      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
-    '
-    export as_echo_n_body
-    as_echo_n='sh -c $as_echo_n_body as_echo'
-  fi
-  export as_echo_body
-  as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  PATH_SEPARATOR=:
-  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
-    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
-      PATH_SEPARATOR=';'
-  }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.  Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" ""       $as_nl"
-
-# Find who we are.  Look in the path if we contain no directory separator.
-as_myself=
-case $0 in #((
-  *[\\/]* ) as_myself=$0 ;;
-  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-  done
-IFS=$as_save_IFS
-
-     ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
-  as_myself=$0
-fi
-if test ! -f "$as_myself"; then
-  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-  exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there.  '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
-  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-if test "x$CONFIG_SHELL" = x; then
-  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '\${1+\"\$@\"}'='\"\$@\"'
-  setopt NO_GLOB_SUBST
-else
-  case \`(set -o) 2>/dev/null\` in #(
-  *posix*) :
-    set -o posix ;; #(
-  *) :
-     ;;
-esac
-fi
-"
-  as_required="as_fn_return () { (exit \$1); }
-as_fn_success () { as_fn_return 0; }
-as_fn_failure () { as_fn_return 1; }
-as_fn_ret_success () { return 0; }
-as_fn_ret_failure () { return 1; }
-
-exitcode=0
-as_fn_success || { exitcode=1; echo as_fn_success failed.; }
-as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
-as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
-as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
-if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
-
-else
-  exitcode=1; echo positional parameters were not saved.
-fi
-test x\$exitcode = x0 || exit 1"
-  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
-  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
-  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
-  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1"
-  if (eval "$as_required") 2>/dev/null; then :
-  as_have_required=yes
-else
-  as_have_required=no
-fi
-  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
-
-else
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-as_found=false
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  as_found=:
-  case $as_dir in #(
-        /*)
-          for as_base in sh bash ksh sh5; do
-            # Try only shells that exist, to save several forks.
-            as_shell=$as_dir/$as_base
-            if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
-                   { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
-  CONFIG_SHELL=$as_shell as_have_required=yes
-                  if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
-  break 2
-fi
-fi
-          done;;
-       esac
-  as_found=false
-done
-$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
-             { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
-  CONFIG_SHELL=$SHELL as_have_required=yes
-fi; }
-IFS=$as_save_IFS
-
-
-      if test "x$CONFIG_SHELL" != x; then :
-  # We cannot yet assume a decent shell, so we have to provide a
-       # neutralization value for shells without unset; and this also
-       # works around shells that cannot unset nonexistent variables.
-       # Preserve -v and -x to the replacement shell.
-       BASH_ENV=/dev/null
-       ENV=/dev/null
-       (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-       export CONFIG_SHELL
-       case $- in # ((((
-         *v*x* | *x*v* ) as_opts=-vx ;;
-         *v* ) as_opts=-v ;;
-         *x* ) as_opts=-x ;;
-         * ) as_opts= ;;
-       esac
-       exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
-fi
-
-    if test x$as_have_required = xno; then :
-  $as_echo "$0: This script requires a shell more modern than all"
-  $as_echo "$0: the shells that I found on your system."
-  if test x${ZSH_VERSION+set} = xset ; then
-    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
-    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
-  else
-    $as_echo "$0: Please tell bug-autoconf@gnu.org about your system,
-$0: including any error possibly output before this
-$0: message. Then install a modern shell, or manually run
-$0: the script under such a shell if you do have one."
-  fi
-  exit 1
-fi
-fi
-fi
-SHELL=${CONFIG_SHELL-/bin/sh}
-export SHELL
-# Unset more variables known to interfere with behavior of common tools.
-CLICOLOR_FORCE= GREP_OPTIONS=
-unset CLICOLOR_FORCE GREP_OPTIONS
-
-## --------------------- ##
-## M4sh Shell Functions. ##
-## --------------------- ##
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
-  { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
-  return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
-  set +e
-  as_fn_set_status $1
-  exit $1
-} # as_fn_exit
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
-  case $as_dir in #(
-  -*) as_dir=./$as_dir;;
-  esac
-  test -d "$as_dir" || eval $as_mkdir_p || {
-    as_dirs=
-    while :; do
-      case $as_dir in #(
-      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
-      *) as_qdir=$as_dir;;
-      esac
-      as_dirs="'$as_qdir' $as_dirs"
-      as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-        X"$as_dir" : 'X\(//\)[^/]' \| \
-        X"$as_dir" : 'X\(//\)$' \| \
-        X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-           s//\1/
-           q
-         }
-         /^X\(\/\/\)[^/].*/{
-           s//\1/
-           q
-         }
-         /^X\(\/\/\)$/{
-           s//\1/
-           q
-         }
-         /^X\(\/\).*/{
-           s//\1/
-           q
-         }
-         s/.*/./; q'`
-      test -d "$as_dir" && break
-    done
-    test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
-  eval 'as_fn_append ()
-  {
-    eval $1+=\$2
-  }'
-else
-  as_fn_append ()
-  {
-    eval $1=\$$1\$2
-  }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
-  eval 'as_fn_arith ()
-  {
-    as_val=$(( $* ))
-  }'
-else
-  as_fn_arith ()
-  {
-    as_val=`expr "$@" || test $? -eq 1`
-  }
-fi # as_fn_arith
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
-  as_status=$1; test $as_status -eq 0 && as_status=1
-  if test "$4"; then
-    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
-  fi
-  $as_echo "$as_me: error: $2" >&2
-  as_fn_exit $as_status
-} # as_fn_error
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-  as_dirname=dirname
-else
-  as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-        X"$0" : 'X\(//\)$' \| \
-        X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{
-           s//\1/
-           q
-         }
-         /^X\/\(\/\/\)$/{
-           s//\1/
-           q
-         }
-         /^X\/\(\/\).*/{
-           s//\1/
-           q
-         }
-         s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-
-  as_lineno_1=$LINENO as_lineno_1a=$LINENO
-  as_lineno_2=$LINENO as_lineno_2a=$LINENO
-  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
-  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
-  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
-  sed -n '
-    p
-    /[$]LINENO/=
-  ' <$as_myself |
-    sed '
-      s/[$]LINENO.*/&-/
-      t lineno
-      b
-      :lineno
-      N
-      :loop
-      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
-      t loop
-      s/-\n.*//
-    ' >$as_me.lineno &&
-  chmod +x "$as_me.lineno" ||
-    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
-
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensitive to this).
-  . "./$as_me.lineno"
-  # Exit status is that of the last command.
-  exit
-}
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
-  case `echo 'xy\c'` in
-  *c*) ECHO_T='        ';;     # ECHO_T is single tab character.
-  xy)  ECHO_C='\c';;
-  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
-       ECHO_T='        ';;
-  esac;;
-*)
-  ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
-  rm -f conf$$.dir/conf$$.file
-else
-  rm -f conf$$.dir
-  mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
-  if ln -s conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s='ln -s'
-    # ... but there are two gotchas:
-    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-    # In both cases, we have to default to `cp -p'.
-    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-      as_ln_s='cp -p'
-  elif ln conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s=ln
-  else
-    as_ln_s='cp -p'
-  fi
-else
-  as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p='mkdir -p "$as_dir"'
-else
-  test -d ./-p && rmdir ./-p
-  as_mkdir_p=false
-fi
-
-if test -x / >/dev/null 2>&1; then
-  as_test_x='test -x'
-else
-  if ls -dL / >/dev/null 2>&1; then
-    as_ls_L_option=L
-  else
-    as_ls_L_option=
-  fi
-  as_test_x='
-    eval sh -c '\''
-      if test -d "$1"; then
-       test -d "$1/.";
-      else
-       case $1 in #(
-       -*)set "./$1";;
-       esac;
-       case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
-       ???[sx]*):;;*)false;;esac;fi
-    '\'' sh
-  '
-fi
-as_executable_p=$as_test_x
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-test -n "$DJDIR" || exec 7<&0 </dev/null
-exec 6>&1
-
-# Name of the host.
-# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-ac_clean_files=
-ac_config_libobj_dir=.
-LIBOBJS=
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-
-# Identity of this package.
-PACKAGE_NAME=
-PACKAGE_TARNAME=
-PACKAGE_VERSION=
-PACKAGE_STRING=
-PACKAGE_BUGREPORT=
-PACKAGE_URL=
-
-ac_unique_file="base"
-ac_subst_vars='LTLIBOBJS
-LIBOBJS
-ULIMIT
-TEST_MINUS_L
-DEAL_II_DIR
-target_alias
-host_alias
-build_alias
-LIBS
-ECHO_T
-ECHO_N
-ECHO_C
-DEFS
-mandir
-localedir
-libdir
-psdir
-pdfdir
-dvidir
-htmldir
-infodir
-docdir
-oldincludedir
-includedir
-localstatedir
-sharedstatedir
-sysconfdir
-datadir
-datarootdir
-libexecdir
-sbindir
-bindir
-program_transform_name
-prefix
-exec_prefix
-PACKAGE_URL
-PACKAGE_BUGREPORT
-PACKAGE_STRING
-PACKAGE_VERSION
-PACKAGE_TARNAME
-PACKAGE_NAME
-PATH_SEPARATOR
-SHELL'
-ac_subst_files=''
-ac_user_opts='
-enable_option_checking
-with_deal
-'
-      ac_precious_vars='build_alias
-host_alias
-target_alias'
-
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-ac_unrecognized_opts=
-ac_unrecognized_sep=
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-# (The list follows the same order as the GNU Coding Standards.)
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datarootdir='${prefix}/share'
-datadir='${datarootdir}'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-docdir='${datarootdir}/doc/${PACKAGE}'
-infodir='${datarootdir}/info'
-htmldir='${docdir}'
-dvidir='${docdir}'
-pdfdir='${docdir}'
-psdir='${docdir}'
-libdir='${exec_prefix}/lib'
-localedir='${datarootdir}/locale'
-mandir='${datarootdir}/man'
-
-ac_prev=
-ac_dashdash=
-for ac_option
-do
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval $ac_prev=\$ac_option
-    ac_prev=
-    continue
-  fi
-
-  case $ac_option in
-  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
-  *=)   ac_optarg= ;;
-  *)    ac_optarg=yes ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case $ac_dashdash$ac_option in
-  --)
-    ac_dashdash=yes ;;
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir=$ac_optarg ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build_alias ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build_alias=$ac_optarg ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file=$ac_optarg ;;
-
-  --config-cache | -C)
-    cache_file=config.cache ;;
-
-  -datadir | --datadir | --datadi | --datad)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=*)
-    datadir=$ac_optarg ;;
-
-  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
-  | --dataroo | --dataro | --datar)
-    ac_prev=datarootdir ;;
-  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
-  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
-    datarootdir=$ac_optarg ;;
-
-  -disable-* | --disable-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid feature name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"enable_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
-        ac_unrecognized_sep=', ';;
-    esac
-    eval enable_$ac_useropt=no ;;
-
-  -docdir | --docdir | --docdi | --doc | --do)
-    ac_prev=docdir ;;
-  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
-    docdir=$ac_optarg ;;
-
-  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
-    ac_prev=dvidir ;;
-  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
-    dvidir=$ac_optarg ;;
-
-  -enable-* | --enable-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid feature name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"enable_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
-        ac_unrecognized_sep=', ';;
-    esac
-    eval enable_$ac_useropt=\$ac_optarg ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix=$ac_optarg ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he | -h)
-    ac_init_help=long ;;
-  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
-    ac_init_help=recursive ;;
-  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
-    ac_init_help=short ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host_alias ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host_alias=$ac_optarg ;;
-
-  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
-    ac_prev=htmldir ;;
-  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
-  | --ht=*)
-    htmldir=$ac_optarg ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir=$ac_optarg ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir=$ac_optarg ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir=$ac_optarg ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir=$ac_optarg ;;
-
-  -localedir | --localedir | --localedi | --localed | --locale)
-    ac_prev=localedir ;;
-  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
-    localedir=$ac_optarg ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst | --locals)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
-    localstatedir=$ac_optarg ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir=$ac_optarg ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c | -n)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir=$ac_optarg ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix=$ac_optarg ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix=$ac_optarg ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix=$ac_optarg ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name=$ac_optarg ;;
-
-  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
-    ac_prev=pdfdir ;;
-  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
-    pdfdir=$ac_optarg ;;
-
-  -psdir | --psdir | --psdi | --psd | --ps)
-    ac_prev=psdir ;;
-  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
-    psdir=$ac_optarg ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir=$ac_optarg ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir=$ac_optarg ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site=$ac_optarg ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir=$ac_optarg ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir=$ac_optarg ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target_alias ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target_alias=$ac_optarg ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers | -V)
-    ac_init_version=: ;;
-
-  -with-* | --with-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid package name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"with_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
-        ac_unrecognized_sep=', ';;
-    esac
-    eval with_$ac_useropt=\$ac_optarg ;;
-
-  -without-* | --without-*)
-    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error $? "invalid package name: $ac_useropt"
-    ac_useropt_orig=$ac_useropt
-    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-    case $ac_user_opts in
-      *"
-"with_$ac_useropt"
-"*) ;;
-      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
-        ac_unrecognized_sep=', ';;
-    esac
-    eval with_$ac_useropt=no ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes=$ac_optarg ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries=$ac_optarg ;;
-
-  -*) as_fn_error $? "unrecognized option: \`$ac_option'
-Try \`$0 --help' for more information"
-    ;;
-
-  *=*)
-    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
-    # Reject names that are not valid shell variable names.
-    case $ac_envvar in #(
-      '' | [0-9]* | *[!_$as_cr_alnum]* )
-      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
-    esac
-    eval $ac_envvar=\$ac_optarg
-    export $ac_envvar ;;
-
-  *)
-    # FIXME: should be removed in autoconf 3.0.
-    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
-    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
-    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-  as_fn_error $? "missing argument to $ac_option"
-fi
-
-if test -n "$ac_unrecognized_opts"; then
-  case $enable_option_checking in
-    no) ;;
-    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
-    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
-  esac
-fi
-
-# Check all directory arguments for consistency.
-for ac_var in  exec_prefix prefix bindir sbindir libexecdir datarootdir \
-               datadir sysconfdir sharedstatedir localstatedir includedir \
-               oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
-               libdir localedir mandir
-do
-  eval ac_val=\$$ac_var
-  # Remove trailing slashes.
-  case $ac_val in
-    */ )
-      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
-      eval $ac_var=\$ac_val;;
-  esac
-  # Be sure to have absolute directory names.
-  case $ac_val in
-    [\\/$]* | ?:[\\/]* )  continue;;
-    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
-  esac
-  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
-  if test "x$build_alias" = x; then
-    cross_compiling=maybe
-    $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
-    If a cross compiler is detected then cross compile mode will be used" >&2
-  elif test "x$build_alias" != "x$host_alias"; then
-    cross_compiling=yes
-  fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-ac_pwd=`pwd` && test -n "$ac_pwd" &&
-ac_ls_di=`ls -di .` &&
-ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
-  as_fn_error $? "working directory cannot be determined"
-test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
-  as_fn_error $? "pwd does not report name of working directory"
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then the parent directory.
-  ac_confdir=`$as_dirname -- "$as_myself" ||
-$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-        X"$as_myself" : 'X\(//\)[^/]' \| \
-        X"$as_myself" : 'X\(//\)$' \| \
-        X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_myself" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-           s//\1/
-           q
-         }
-         /^X\(\/\/\)[^/].*/{
-           s//\1/
-           q
-         }
-         /^X\(\/\/\)$/{
-           s//\1/
-           q
-         }
-         /^X\(\/\).*/{
-           s//\1/
-           q
-         }
-         s/.*/./; q'`
-  srcdir=$ac_confdir
-  if test ! -r "$srcdir/$ac_unique_file"; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r "$srcdir/$ac_unique_file"; then
-  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
-  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
-fi
-ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-ac_abs_confdir=`(
-       cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
-       pwd)`
-# When building in place, set srcdir=.
-if test "$ac_abs_confdir" = "$ac_pwd"; then
-  srcdir=.
-fi
-# Remove unnecessary trailing slashes from srcdir.
-# Double slashes in file names in object file debugging info
-# mess up M-x gdb in Emacs.
-case $srcdir in
-*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
-esac
-for ac_var in $ac_precious_vars; do
-  eval ac_env_${ac_var}_set=\${${ac_var}+set}
-  eval ac_env_${ac_var}_value=\$${ac_var}
-  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
-  eval ac_cv_env_${ac_var}_value=\$${ac_var}
-done
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
-  # Omit some internal or obsolete options to make the list less imposing.
-  # This message is too long to be a string in the A/UX 3.1 sh.
-  cat <<_ACEOF
-\`configure' configures this package to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE.  See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
-  -h, --help              display this help and exit
-      --help=short        display options specific to this package
-      --help=recursive    display the short help of all the included packages
-  -V, --version           display version information and exit
-  -q, --quiet, --silent   do not print \`checking ...' messages
-      --cache-file=FILE   cache test results in FILE [disabled]
-  -C, --config-cache      alias for \`--cache-file=config.cache'
-  -n, --no-create         do not create output files
-      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
-
-Installation directories:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
-  --bindir=DIR            user executables [EPREFIX/bin]
-  --sbindir=DIR           system admin executables [EPREFIX/sbin]
-  --libexecdir=DIR        program executables [EPREFIX/libexec]
-  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
-  --libdir=DIR            object code libraries [EPREFIX/lib]
-  --includedir=DIR        C header files [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
-  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
-  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
-  --infodir=DIR           info documentation [DATAROOTDIR/info]
-  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
-  --mandir=DIR            man documentation [DATAROOTDIR/man]
-  --docdir=DIR            documentation root [DATAROOTDIR/doc/PACKAGE]
-  --htmldir=DIR           html documentation [DOCDIR]
-  --dvidir=DIR            dvi documentation [DOCDIR]
-  --pdfdir=DIR            pdf documentation [DOCDIR]
-  --psdir=DIR             ps documentation [DOCDIR]
-_ACEOF
-
-  cat <<\_ACEOF
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
-
-  cat <<\_ACEOF
-
-Optional Packages:
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --with-deal=DIR DIR is the root of the deal.II library
-
-Report bugs to the package provider.
-_ACEOF
-ac_status=$?
-fi
-
-if test "$ac_init_help" = "recursive"; then
-  # If there are subdirs, report their specific --help.
-  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-    test -d "$ac_dir" ||
-      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
-      continue
-    ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
-  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
-  # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
-  case $ac_top_builddir_sub in
-  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-  esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
-  .)  # We are building in place.
-    ac_srcdir=.
-    ac_top_srcdir=$ac_top_builddir_sub
-    ac_abs_top_srcdir=$ac_pwd ;;
-  [\\/]* | ?:[\\/]* )  # Absolute name.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir
-    ac_abs_top_srcdir=$srcdir ;;
-  *) # Relative name.
-    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_build_prefix$srcdir
-    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-    cd "$ac_dir" || { ac_status=$?; continue; }
-    # Check for guested configure.
-    if test -f "$ac_srcdir/configure.gnu"; then
-      echo &&
-      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
-    elif test -f "$ac_srcdir/configure"; then
-      echo &&
-      $SHELL "$ac_srcdir/configure" --help=recursive
-    else
-      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-    fi || ac_status=$?
-    cd "$ac_pwd" || { ac_status=$?; break; }
-  done
-fi
-
-test -n "$ac_init_help" && exit $ac_status
-if $ac_init_version; then
-  cat <<\_ACEOF
-configure
-generated by GNU Autoconf 2.68
-
-Copyright (C) 2010 Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-_ACEOF
-  exit
-fi
-
-## ------------------------ ##
-## Autoconf initialization. ##
-## ------------------------ ##
-cat >config.log <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by $as_me, which was
-generated by GNU Autoconf 2.68.  Invocation command line was
-
-  $ $0 $@
-
-_ACEOF
-exec 5>>config.log
-{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
-
-/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
-/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
-/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
-/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
-/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    $as_echo "PATH: $as_dir"
-  done
-IFS=$as_save_IFS
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
-  for ac_arg
-  do
-    case $ac_arg in
-    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
-    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-    | -silent | --silent | --silen | --sile | --sil)
-      continue ;;
-    *\'*)
-      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-    esac
-    case $ac_pass in
-    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
-    2)
-      as_fn_append ac_configure_args1 " '$ac_arg'"
-      if test $ac_must_keep_next = true; then
-       ac_must_keep_next=false # Got value, back to normal.
-      else
-       case $ac_arg in
-         *=* | --config-cache | -C | -disable-* | --disable-* \
-         | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
-         | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
-         | -with-* | --with-* | -without-* | --without-* | --x)
-           case "$ac_configure_args0 " in
-             "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
-           esac
-           ;;
-         -* ) ac_must_keep_next=true ;;
-       esac
-      fi
-      as_fn_append ac_configure_args " '$ac_arg'"
-      ;;
-    esac
-  done
-done
-{ ac_configure_args0=; unset ac_configure_args0;}
-{ ac_configure_args1=; unset ac_configure_args1;}
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log.  We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Use '\'' to represent an apostrophe within the trap.
-# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
-trap 'exit_status=$?
-  # Save into config.log some information that might help in debugging.
-  {
-    echo
-
-    $as_echo "## ---------------- ##
-## Cache variables. ##
-## ---------------- ##"
-    echo
-    # The following way of writing the cache mishandles newlines in values,
-(
-  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
-    eval ac_val=\$$ac_var
-    case $ac_val in #(
-    *${as_nl}*)
-      case $ac_var in #(
-      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
-      esac
-      case $ac_var in #(
-      _ | IFS | as_nl) ;; #(
-      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
-      *) { eval $ac_var=; unset $ac_var;} ;;
-      esac ;;
-    esac
-  done
-  (set) 2>&1 |
-    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
-    *${as_nl}ac_space=\ *)
-      sed -n \
-       "s/'\''/'\''\\\\'\'''\''/g;
-         s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
-      ;; #(
-    *)
-      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
-      ;;
-    esac |
-    sort
-)
-    echo
-
-    $as_echo "## ----------------- ##
-## Output variables. ##
-## ----------------- ##"
-    echo
-    for ac_var in $ac_subst_vars
-    do
-      eval ac_val=\$$ac_var
-      case $ac_val in
-      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-      esac
-      $as_echo "$ac_var='\''$ac_val'\''"
-    done | sort
-    echo
-
-    if test -n "$ac_subst_files"; then
-      $as_echo "## ------------------- ##
-## File substitutions. ##
-## ------------------- ##"
-      echo
-      for ac_var in $ac_subst_files
-      do
-       eval ac_val=\$$ac_var
-       case $ac_val in
-       *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-       esac
-       $as_echo "$ac_var='\''$ac_val'\''"
-      done | sort
-      echo
-    fi
-
-    if test -s confdefs.h; then
-      $as_echo "## ----------- ##
-## confdefs.h. ##
-## ----------- ##"
-      echo
-      cat confdefs.h
-      echo
-    fi
-    test "$ac_signal" != 0 &&
-      $as_echo "$as_me: caught signal $ac_signal"
-    $as_echo "$as_me: exit $exit_status"
-  } >&5
-  rm -f core *.core core.conftest.* &&
-    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
-    exit $exit_status
-' 0
-for ac_signal in 1 2 13 15; do
-  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -f -r conftest* confdefs.h
-
-$as_echo "/* confdefs.h */" > confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_URL "$PACKAGE_URL"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer an explicitly selected file to automatically selected ones.
-ac_site_file1=NONE
-ac_site_file2=NONE
-if test -n "$CONFIG_SITE"; then
-  # We do not want a PATH search for config.site.
-  case $CONFIG_SITE in #((
-    -*)  ac_site_file1=./$CONFIG_SITE;;
-    */*) ac_site_file1=$CONFIG_SITE;;
-    *)   ac_site_file1=./$CONFIG_SITE;;
-  esac
-elif test "x$prefix" != xNONE; then
-  ac_site_file1=$prefix/share/config.site
-  ac_site_file2=$prefix/etc/config.site
-else
-  ac_site_file1=$ac_default_prefix/share/config.site
-  ac_site_file2=$ac_default_prefix/etc/config.site
-fi
-for ac_site_file in "$ac_site_file1" "$ac_site_file2"
-do
-  test "x$ac_site_file" = xNONE && continue
-  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
-$as_echo "$as_me: loading site script $ac_site_file" >&6;}
-    sed 's/^/| /' "$ac_site_file" >&5
-    . "$ac_site_file" \
-      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "failed to load site script $ac_site_file
-See \`config.log' for more details" "$LINENO" 5; }
-  fi
-done
-
-
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in $ac_precious_vars; do
-  eval ac_old_set=\$ac_cv_env_${ac_var}_set
-  eval ac_new_set=\$ac_env_${ac_var}_set
-  eval ac_old_val=\$ac_cv_env_${ac_var}_value
-  eval ac_new_val=\$ac_env_${ac_var}_value
-  case $ac_old_set,$ac_new_set in
-    set,)
-      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,set)
-      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,);;
-    *)
-      if test "x$ac_old_val" != "x$ac_new_val"; then
-       # differences in whitespace do not lead to failure.
-       ac_old_val_w=`echo x $ac_old_val`
-       ac_new_val_w=`echo x $ac_new_val`
-       if test "$ac_old_val_w" != "$ac_new_val_w"; then
-         { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
-$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-         ac_cache_corrupted=:
-       else
-         { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
-$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
-         eval $ac_var=\$ac_old_val
-       fi
-       { $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
-$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
-       { $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
-$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
-      fi;;
-  esac
-  # Pass precious variables to config.status.
-  if test "$ac_new_set" = set; then
-    case $ac_new_val in
-    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
-    *) ac_arg=$ac_var=$ac_new_val ;;
-    esac
-    case " $ac_configure_args " in
-      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
-      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
-    esac
-  fi
-done
-if $ac_cache_corrupted; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
-$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
-fi
-## -------------------- ##
-## Main body of script. ##
-## -------------------- ##
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-
-# Check whether --with-deal was given.
-if test "${with_deal+set}" = set; then :
-  withval=$with_deal;   DEAL_II_DIR=$withval
-else
-
-    if test "x$DEAL_II_DIR" = "x" ; then
-      if test -r ../common/Make.global_options ; then
-        DEAL_II_DIR=`pwd`/.. ;
-      fi
-      if test -r ../deal.II/common/Make.global_options ; then
-        DEAL_II_DIR=`pwd`/../deal.II ;
-      fi
-      if test -r ../deal/common/Make.global_options ; then
-        DEAL_II_DIR=`pwd`/../deal ;
-      fi
-    fi
-
-fi
-
-
-
-
-rm -f acconfig.link
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for test -L" >&5
-$as_echo_n "checking for test -L... " >&6; }
-ln -s Makefile acconfig.link
-echo "test -L acconfig.link" > acconfig.test
-chmod 777 acconfig.test
-if eval ./acconfig.test ; then
-  TEST_MINUS_L="test -L" ;
-else
-  TEST_MINUS_L="bash test -L" ;
-fi
-rm -f acconfig.link acconfig.test
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $TEST_MINUS_L" >&5
-$as_echo "$TEST_MINUS_L" >&6; }
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we can call ulimit" >&5
-$as_echo_n "checking whether we can call ulimit... " >&6; }
-(ulimit -t 2400 2>&1) > /dev/null
-if test ! $? = 0 ; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-  ULIMIT=":"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-  ULIMIT="ulimit"
-fi
-
-
-
-
-ac_config_files="$ac_config_files Makefile.paths"
-
-
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-#
-# If the first sed substitution is executed (which looks for macros that
-# take arguments), then branch to the quote section.  Otherwise,
-# look for a macro that doesn't take arguments.
-ac_script='
-:mline
-/\\$/{
- N
- s,\\\n,,
- b mline
-}
-t clear
-:clear
-s/^[    ]*#[    ]*define[       ][      ]*\([^  (][^    (]*([^)]*)\)[   ]*\(.*\)/-D\1=\2/g
-t quote
-s/^[    ]*#[    ]*define[       ][      ]*\([^  ][^     ]*\)[   ]*\(.*\)/-D\1=\2/g
-t quote
-b any
-:quote
-s/[     `~#$^&*(){}\\|;'\''"<>?]/\\&/g
-s/\[/\\&/g
-s/\]/\\&/g
-s/\$/$$/g
-H
-:any
-${
-       g
-       s/^\n//
-       s/\n/ /g
-       p
-}
-'
-DEFS=`sed -n "$ac_script" confdefs.h`
-
-
-ac_libobjs=
-ac_ltlibobjs=
-U=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
-  # 1. Remove the extension, and $U if already installed.
-  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
-  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
-  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
-  #    will be set to the directory where LIBOBJS objects are built.
-  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
-  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
-
-LTLIBOBJS=$ac_ltlibobjs
-
-
-
-: "${CONFIG_STATUS=./config.status}"
-ac_write_fail=0
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
-$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
-as_write_fail=0
-cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-
-SHELL=\${CONFIG_SHELL-$SHELL}
-export SHELL
-_ASEOF
-cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in #(
-  *posix*) :
-    set -o posix ;; #(
-  *) :
-     ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
-    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='print -r --'
-  as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='printf %s\n'
-  as_echo_n='printf %s'
-else
-  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
-    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
-    as_echo_n='/usr/ucb/echo -n'
-  else
-    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
-    as_echo_n_body='eval
-      arg=$1;
-      case $arg in #(
-      *"$as_nl"*)
-       expr "X$arg" : "X\\(.*\\)$as_nl";
-       arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
-      esac;
-      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
-    '
-    export as_echo_n_body
-    as_echo_n='sh -c $as_echo_n_body as_echo'
-  fi
-  export as_echo_body
-  as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  PATH_SEPARATOR=:
-  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
-    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
-      PATH_SEPARATOR=';'
-  }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.  Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" ""       $as_nl"
-
-# Find who we are.  Look in the path if we contain no directory separator.
-as_myself=
-case $0 in #((
-  *[\\/]* ) as_myself=$0 ;;
-  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-  done
-IFS=$as_save_IFS
-
-     ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
-  as_myself=$0
-fi
-if test ! -f "$as_myself"; then
-  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-  exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there.  '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
-  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
-  as_status=$1; test $as_status -eq 0 && as_status=1
-  if test "$4"; then
-    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
-  fi
-  $as_echo "$as_me: error: $2" >&2
-  as_fn_exit $as_status
-} # as_fn_error
-
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
-  return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
-  set +e
-  as_fn_set_status $1
-  exit $1
-} # as_fn_exit
-
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
-  { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
-  eval 'as_fn_append ()
-  {
-    eval $1+=\$2
-  }'
-else
-  as_fn_append ()
-  {
-    eval $1=\$$1\$2
-  }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
-  eval 'as_fn_arith ()
-  {
-    as_val=$(( $* ))
-  }'
-else
-  as_fn_arith ()
-  {
-    as_val=`expr "$@" || test $? -eq 1`
-  }
-fi # as_fn_arith
-
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-  as_dirname=dirname
-else
-  as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-        X"$0" : 'X\(//\)$' \| \
-        X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{
-           s//\1/
-           q
-         }
-         /^X\/\(\/\/\)$/{
-           s//\1/
-           q
-         }
-         /^X\/\(\/\).*/{
-           s//\1/
-           q
-         }
-         s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
-  case `echo 'xy\c'` in
-  *c*) ECHO_T='        ';;     # ECHO_T is single tab character.
-  xy)  ECHO_C='\c';;
-  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
-       ECHO_T='        ';;
-  esac;;
-*)
-  ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
-  rm -f conf$$.dir/conf$$.file
-else
-  rm -f conf$$.dir
-  mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
-  if ln -s conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s='ln -s'
-    # ... but there are two gotchas:
-    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-    # In both cases, we have to default to `cp -p'.
-    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-      as_ln_s='cp -p'
-  elif ln conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s=ln
-  else
-    as_ln_s='cp -p'
-  fi
-else
-  as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
-  case $as_dir in #(
-  -*) as_dir=./$as_dir;;
-  esac
-  test -d "$as_dir" || eval $as_mkdir_p || {
-    as_dirs=
-    while :; do
-      case $as_dir in #(
-      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
-      *) as_qdir=$as_dir;;
-      esac
-      as_dirs="'$as_qdir' $as_dirs"
-      as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-        X"$as_dir" : 'X\(//\)[^/]' \| \
-        X"$as_dir" : 'X\(//\)$' \| \
-        X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-           s//\1/
-           q
-         }
-         /^X\(\/\/\)[^/].*/{
-           s//\1/
-           q
-         }
-         /^X\(\/\/\)$/{
-           s//\1/
-           q
-         }
-         /^X\(\/\).*/{
-           s//\1/
-           q
-         }
-         s/.*/./; q'`
-      test -d "$as_dir" && break
-    done
-    test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p='mkdir -p "$as_dir"'
-else
-  test -d ./-p && rmdir ./-p
-  as_mkdir_p=false
-fi
-
-if test -x / >/dev/null 2>&1; then
-  as_test_x='test -x'
-else
-  if ls -dL / >/dev/null 2>&1; then
-    as_ls_L_option=L
-  else
-    as_ls_L_option=
-  fi
-  as_test_x='
-    eval sh -c '\''
-      if test -d "$1"; then
-       test -d "$1/.";
-      else
-       case $1 in #(
-       -*)set "./$1";;
-       esac;
-       case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
-       ???[sx]*):;;*)false;;esac;fi
-    '\'' sh
-  '
-fi
-as_executable_p=$as_test_x
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-exec 6>&1
-## ----------------------------------- ##
-## Main body of $CONFIG_STATUS script. ##
-## ----------------------------------- ##
-_ASEOF
-test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# Save the log message, to keep $0 and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.
-ac_log="
-This file was extended by $as_me, which was
-generated by GNU Autoconf 2.68.  Invocation command line was
-
-  CONFIG_FILES    = $CONFIG_FILES
-  CONFIG_HEADERS  = $CONFIG_HEADERS
-  CONFIG_LINKS    = $CONFIG_LINKS
-  CONFIG_COMMANDS = $CONFIG_COMMANDS
-  $ $0 $@
-
-on `(hostname || uname -n) 2>/dev/null | sed 1q`
-"
-
-_ACEOF
-
-case $ac_config_files in *"
-"*) set x $ac_config_files; shift; ac_config_files=$*;;
-esac
-
-
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-# Files that config.status was made for.
-config_files="$ac_config_files"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-ac_cs_usage="\
-\`$as_me' instantiates files and other configuration actions
-from templates according to the current configuration.  Unless the files
-and actions are specified as TAGs, all are instantiated by default.
-
-Usage: $0 [OPTION]... [TAG]...
-
-  -h, --help       print this help, then exit
-  -V, --version    print version number and configuration settings, then exit
-      --config     print configuration, then exit
-  -q, --quiet, --silent
-                   do not print progress messages
-  -d, --debug      don't remove temporary files
-      --recheck    update $as_me by reconfiguring in the same conditions
-      --file=FILE[:TEMPLATE]
-                   instantiate the configuration file FILE
-
-Configuration files:
-$config_files
-
-Report bugs to the package provider."
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
-ac_cs_version="\\
-config.status
-configured by $0, generated by GNU Autoconf 2.68,
-  with options \\"\$ac_cs_config\\"
-
-Copyright (C) 2010 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-
-ac_pwd='$ac_pwd'
-srcdir='$srcdir'
-test -n "\$AWK" || AWK=awk
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# The default lists apply if the user does not specify any file.
-ac_need_defaults=:
-while test $# != 0
-do
-  case $1 in
-  --*=?*)
-    ac_option=`expr "X$1" : 'X\([^=]*\)='`
-    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
-    ac_shift=:
-    ;;
-  --*=)
-    ac_option=`expr "X$1" : 'X\([^=]*\)='`
-    ac_optarg=
-    ac_shift=:
-    ;;
-  *)
-    ac_option=$1
-    ac_optarg=$2
-    ac_shift=shift
-    ;;
-  esac
-
-  case $ac_option in
-  # Handling of the options.
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    ac_cs_recheck=: ;;
-  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
-    $as_echo "$ac_cs_version"; exit ;;
-  --config | --confi | --conf | --con | --co | --c )
-    $as_echo "$ac_cs_config"; exit ;;
-  --debug | --debu | --deb | --de | --d | -d )
-    debug=: ;;
-  --file | --fil | --fi | --f )
-    $ac_shift
-    case $ac_optarg in
-    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
-    '') as_fn_error $? "missing file argument" ;;
-    esac
-    as_fn_append CONFIG_FILES " '$ac_optarg'"
-    ac_need_defaults=false;;
-  --he | --h |  --help | --hel | -h )
-    $as_echo "$ac_cs_usage"; exit ;;
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil | --si | --s)
-    ac_cs_silent=: ;;
-
-  # This is an error.
-  -*) as_fn_error $? "unrecognized option: \`$1'
-Try \`$0 --help' for more information." ;;
-
-  *) as_fn_append ac_config_targets " $1"
-     ac_need_defaults=false ;;
-
-  esac
-  shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
-  exec 6>/dev/null
-  ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-if \$ac_cs_recheck; then
-  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-  shift
-  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
-  CONFIG_SHELL='$SHELL'
-  export CONFIG_SHELL
-  exec "\$@"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-exec 5>>config.log
-{
-  echo
-  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-  $as_echo "$ac_log"
-} >&5
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-
-# Handling of arguments.
-for ac_config_target in $ac_config_targets
-do
-  case $ac_config_target in
-    "Makefile.paths") CONFIG_FILES="$CONFIG_FILES Makefile.paths" ;;
-
-  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
-  esac
-done
-
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used.  Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
-  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-fi
-
-# Have a temporary directory for convenience.  Make it in the build tree
-# simply because there is no reason against having it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Hook for its removal unless debugging.
-# Note that there is a small window in which the directory will not be cleaned:
-# after its creation but before its name has been assigned to `$tmp'.
-$debug ||
-{
-  tmp= ac_tmp=
-  trap 'exit_status=$?
-  : "${ac_tmp:=$tmp}"
-  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
-' 0
-  trap 'as_fn_exit 1' 1 2 13 15
-}
-# Create a (secure) tmp directory for tmp files.
-
-{
-  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
-  test -d "$tmp"
-}  ||
-{
-  tmp=./conf$$-$RANDOM
-  (umask 077 && mkdir "$tmp")
-} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
-ac_tmp=$tmp
-
-# Set up the scripts for CONFIG_FILES section.
-# No need to generate them if there are no CONFIG_FILES.
-# This happens for instance with `./config.status config.h'.
-if test -n "$CONFIG_FILES"; then
-
-
-ac_cr=`echo X | tr X '\015'`
-# On cygwin, bash can eat \r inside `` if the user requested igncr.
-# But we know of no other shell where ac_cr would be empty at this
-# point, so we can use a bashism as a fallback.
-if test "x$ac_cr" = x; then
-  eval ac_cr=\$\'\\r\'
-fi
-ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
-  ac_cs_awk_cr='\\r'
-else
-  ac_cs_awk_cr=$ac_cr
-fi
-
-echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
-_ACEOF
-
-
-{
-  echo "cat >conf$$subs.awk <<_ACEOF" &&
-  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
-  echo "_ACEOF"
-} >conf$$subs.sh ||
-  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
-  . ./conf$$subs.sh ||
-    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-
-  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
-  if test $ac_delim_n = $ac_delim_num; then
-    break
-  elif $ac_last_try; then
-    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-  else
-    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
-  fi
-done
-rm -f conf$$subs.sh
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
-_ACEOF
-sed -n '
-h
-s/^/S["/; s/!.*/"]=/
-p
-g
-s/^[^!]*!//
-:repl
-t repl
-s/'"$ac_delim"'$//
-t delim
-:nl
-h
-s/\(.\{148\}\)..*/\1/
-t more1
-s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
-p
-n
-b repl
-:more1
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t nl
-:delim
-h
-s/\(.\{148\}\)..*/\1/
-t more2
-s/["\\]/\\&/g; s/^/"/; s/$/"/
-p
-b
-:more2
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t delim
-' <conf$$subs.awk | sed '
-/^[^""]/{
-  N
-  s/\n//
-}
-' >>$CONFIG_STATUS || ac_write_fail=1
-rm -f conf$$subs.awk
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-_ACAWK
-cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
-  for (key in S) S_is_set[key] = 1
-  FS = "\a"
-
-}
-{
-  line = $ 0
-  nfields = split(line, field, "@")
-  substed = 0
-  len = length(field[1])
-  for (i = 2; i < nfields; i++) {
-    key = field[i]
-    keylen = length(key)
-    if (S_is_set[key]) {
-      value = S[key]
-      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
-      len += length(value) + length(field[++i])
-      substed = 1
-    } else
-      len += 1 + keylen
-  }
-
-  print line
-}
-
-_ACAWK
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
-  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
-else
-  cat
-fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
-  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
-_ACEOF
-
-# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
-# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[         ]*VPATH[        ]*=[    ]*/{
-h
-s///
-s/^/:/
-s/[     ]*$/:/
-s/:\$(srcdir):/:/g
-s/:\${srcdir}:/:/g
-s/:@srcdir@:/:/g
-s/^:*//
-s/:*$//
-x
-s/\(=[  ]*\).*/\1/
-G
-s/\n//
-s/^[^=]*=[      ]*$//
-}'
-fi
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-fi # test -n "$CONFIG_FILES"
-
-
-eval set X "  :F $CONFIG_FILES      "
-shift
-for ac_tag
-do
-  case $ac_tag in
-  :[FHLC]) ac_mode=$ac_tag; continue;;
-  esac
-  case $ac_mode$ac_tag in
-  :[FHL]*:*);;
-  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
-  :[FH]-) ac_tag=-:-;;
-  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
-  esac
-  ac_save_IFS=$IFS
-  IFS=:
-  set x $ac_tag
-  IFS=$ac_save_IFS
-  shift
-  ac_file=$1
-  shift
-
-  case $ac_mode in
-  :L) ac_source=$1;;
-  :[FH])
-    ac_file_inputs=
-    for ac_f
-    do
-      case $ac_f in
-      -) ac_f="$ac_tmp/stdin";;
-      *) # Look for the file first in the build tree, then in the source tree
-        # (if the path is not absolute).  The absolute path cannot be DOS-style,
-        # because $ac_f cannot contain `:'.
-        test -f "$ac_f" ||
-          case $ac_f in
-          [\\/$]*) false;;
-          *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
-          esac ||
-          as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
-      esac
-      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
-      as_fn_append ac_file_inputs " '$ac_f'"
-    done
-
-    # Let's still pretend it is `configure' which instantiates (i.e., don't
-    # use $as_me), people would be surprised to read:
-    #    /* config.h.  Generated by config.status.  */
-    configure_input='Generated from '`
-         $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
-       `' by configure.'
-    if test x"$ac_file" != x-; then
-      configure_input="$ac_file.  $configure_input"
-      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
-$as_echo "$as_me: creating $ac_file" >&6;}
-    fi
-    # Neutralize special characters interpreted by sed in replacement strings.
-    case $configure_input in #(
-    *\&* | *\|* | *\\* )
-       ac_sed_conf_input=`$as_echo "$configure_input" |
-       sed 's/[\\\\&|]/\\\\&/g'`;; #(
-    *) ac_sed_conf_input=$configure_input;;
-    esac
-
-    case $ac_tag in
-    *:-:* | *:-) cat >"$ac_tmp/stdin" \
-      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
-    esac
-    ;;
-  esac
-
-  ac_dir=`$as_dirname -- "$ac_file" ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-        X"$ac_file" : 'X\(//\)[^/]' \| \
-        X"$ac_file" : 'X\(//\)$' \| \
-        X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-           s//\1/
-           q
-         }
-         /^X\(\/\/\)[^/].*/{
-           s//\1/
-           q
-         }
-         /^X\(\/\/\)$/{
-           s//\1/
-           q
-         }
-         /^X\(\/\).*/{
-           s//\1/
-           q
-         }
-         s/.*/./; q'`
-  as_dir="$ac_dir"; as_fn_mkdir_p
-  ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
-  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
-  # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
-  case $ac_top_builddir_sub in
-  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-  esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
-  .)  # We are building in place.
-    ac_srcdir=.
-    ac_top_srcdir=$ac_top_builddir_sub
-    ac_abs_top_srcdir=$ac_pwd ;;
-  [\\/]* | ?:[\\/]* )  # Absolute name.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir
-    ac_abs_top_srcdir=$srcdir ;;
-  *) # Relative name.
-    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_build_prefix$srcdir
-    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-
-  case $ac_mode in
-  :F)
-  #
-  # CONFIG_FILE
-  #
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# If the template does not know about datarootdir, expand it.
-# FIXME: This hack should be removed a few years after 2.60.
-ac_datarootdir_hack=; ac_datarootdir_seen=
-ac_sed_dataroot='
-/datarootdir/ {
-  p
-  q
-}
-/@datadir@/p
-/@docdir@/p
-/@infodir@/p
-/@localedir@/p
-/@mandir@/p'
-case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
-*datarootdir*) ac_datarootdir_seen=yes;;
-*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-  ac_datarootdir_hack='
-  s&@datadir@&$datadir&g
-  s&@docdir@&$docdir&g
-  s&@infodir@&$infodir&g
-  s&@localedir@&$localedir&g
-  s&@mandir@&$mandir&g
-  s&\\\${datarootdir}&$datarootdir&g' ;;
-esac
-_ACEOF
-
-# Neutralize VPATH when `$srcdir' = `.'.
-# Shell code in configure.ac might set extrasub.
-# FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_sed_extra="$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s|@configure_input@|$ac_sed_conf_input|;t t
-s&@top_builddir@&$ac_top_builddir_sub&;t t
-s&@top_build_prefix@&$ac_top_build_prefix&;t t
-s&@srcdir@&$ac_srcdir&;t t
-s&@abs_srcdir@&$ac_abs_srcdir&;t t
-s&@top_srcdir@&$ac_top_srcdir&;t t
-s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-s&@builddir@&$ac_builddir&;t t
-s&@abs_builddir@&$ac_abs_builddir&;t t
-s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-$ac_datarootdir_hack
-"
-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
-  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
-
-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
-  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
-  { ac_out=`sed -n '/^[         ]*datarootdir[  ]*:*=/p' \
-      "$ac_tmp/out"`; test -z "$ac_out"; } &&
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined.  Please make sure it is defined" >&5
-$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined.  Please make sure it is defined" >&2;}
-
-  rm -f "$ac_tmp/stdin"
-  case $ac_file in
-  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
-  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
-  esac \
-  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
- ;;
-
-
-
-  esac
-
-done # for ac_tag
-
-
-as_fn_exit 0
-_ACEOF
-ac_clean_files=$ac_clean_files_save
-
-test $ac_write_fail = 0 ||
-  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
-
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded.  So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status.  When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
-  ac_cs_success=:
-  ac_config_status_args=
-  test "$silent" = yes &&
-    ac_config_status_args="$ac_config_status_args --quiet"
-  exec 5>/dev/null
-  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
-  exec 5>>config.log
-  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
-  # would make configure fail if this is the last instruction.
-  $ac_cs_success || as_fn_exit 1
-fi
-if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
-$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
-fi
-
diff --git a/tests/configure.in b/tests/configure.in
deleted file mode 100644 (file)
index dbf60de..0000000
+++ /dev/null
@@ -1,66 +0,0 @@
-dnl $Id$
-dnl
-dnl configure script to find the main deal library
-dnl in .. or ../deal.II or ../deal
-dnl
-
-define([AC_CACHE_LOAD], )dnl
-define([AC_CACHE_SAVE], )dnl
-AC_INIT(base)
-
-dnl Supply deal-directory in command line or find it, if it hasn't
-dnl been set as an environment variable already
-AC_ARG_WITH(deal,
-  [  --with-deal=DIR DIR is the root of the deal.II library],
-  [  DEAL_II_DIR=$withval],
-  [
-    if test "x$DEAL_II_DIR" = "x" ; then
-      if test -r ../common/Make.global_options ; then
-        DEAL_II_DIR=`pwd`/.. ;
-      fi
-      if test -r ../deal.II/common/Make.global_options ; then
-        DEAL_II_DIR=`pwd`/../deal.II ;
-      fi
-      if test -r ../deal/common/Make.global_options ; then
-        DEAL_II_DIR=`pwd`/../deal ;
-      fi
-    fi
-  ])
-AC_SUBST(DEAL_II_DIR)
-
-
-dnl Check whether we can use "test -L" and if not substitute it with
-dnl "bash test -L". Unfortunately, the systems where either works seem
-dnl mutually exclusive
-rm -f acconfig.link
-AC_MSG_CHECKING(for test -L)
-ln -s Makefile acconfig.link
-echo "test -L acconfig.link" > acconfig.test
-chmod 777 acconfig.test
-if eval ./acconfig.test ; then
-  TEST_MINUS_L="test -L" ;
-else
-  TEST_MINUS_L="bash test -L" ;
-fi
-rm -f acconfig.link acconfig.test
-AC_MSG_RESULT($TEST_MINUS_L)
-AC_SUBST(TEST_MINUS_L)
-
-
-
-dnl Check whether we can call 'ulimit' on a system. Some systems do
-dnl not appear to allow this, for whatever reason.
-AC_MSG_CHECKING(whether we can call ulimit)
-(ulimit -t 2400 2>&1) > /dev/null
-if test ! $? = 0 ; then
-  AC_MSG_RESULT(no)
-  ULIMIT=":"
-else
-  AC_MSG_RESULT(yes)
-  ULIMIT="ulimit"
-fi
-AC_SUBST(ULIMIT)
-
-
-
-AC_OUTPUT(Makefile.paths)
diff --git a/tests/hierarchy.pl b/tests/hierarchy.pl
deleted file mode 100644 (file)
index cb6e513..0000000
+++ /dev/null
@@ -1,97 +0,0 @@
-# Given the name of a configuration (i.e. system-name+compiler-name), this script
-# generates a list of files that might contain the stored output of a test. The
-# purpose is so that we don't have to store the output of each test for each
-# configuration: if the output for a given configuration is equal to that of
-# a related configuration, then we fall back to the latter, whereas we use
-# the former if it is really different. This way we get a chain of
-# possible files.
-#
-# For example, for a test named "check_me", if we run on a linux x86 system with
-# compiler gcc3.4, we may have a file with output stored as
-#   check_me/cmp/i686-pc-linux-gnu+gcc3.4
-# However, if it is the same as what we would have gotten with gcc3.3, there would
-# be no point in storing it and we should fall back to the output of gcc3.3. If
-# that output would have been the same as that for a generic compiler (which we
-# take as gcc3.2 on a x86 box), then the file
-#   check_me/cmp/i686-pc-linux-gnu+gcc3.3
-# may not exist either.
-#
-# When we want to compare generated output against stored output, we should therefore
-# first compare against
-#   check_me/cmp/i686-pc-linux-gnu+gcc3.4
-# and if that doesn't exist against
-#   check_me/cmp/i686-pc-linux-gnu+gcc3.3
-# and if that doesn't exist again
-#   check_me/cmp/generic
-# (this latter file should always exist).
-#
-# This program generates this chain of files to check against, for any given input
-# configuration.
-#
-# Author: Wolfgang Bangerth, 2005
-
-
-$hierarchy{"i686-pc-linux-gnu+gcc3.3"}        = "generic";
-$hierarchy{"i686-pc-linux-gnu+gcc3.4"}        = "i686-pc-linux-gnu+gcc3.3";
-$hierarchy{"i686-pc-linux-gnu+gcc4.0"}        = "i686-pc-linux-gnu+gcc3.4";
-$hierarchy{"i686-pc-linux-gnu+gcc4.1"}        = "i686-pc-linux-gnu+gcc4.0";
-$hierarchy{"i686-pc-linux-gnu+gcc4.2"}        = "i686-pc-linux-gnu+gcc4.1";
-$hierarchy{"i686-pc-linux-gnu+gcc4.3"}        = "i686-pc-linux-gnu+gcc4.2";
-$hierarchy{"i686-pc-linux-gnu+gcc4.4"}        = "i686-pc-linux-gnu+gcc4.3";
-$hierarchy{"i686-pc-linux-gnu+gcc4.5"}        = "i686-pc-linux-gnu+gcc4.4";
-$hierarchy{"i686-pc-linux-gnu+gcc4.6"}        = "i686-pc-linux-gnu+gcc4.5";
-
-$hierarchy{"i686-pc-linux-gnu+icc7"}          = "generic";
-$hierarchy{"i686-pc-linux-gnu+icc7.1"}        = "i686-pc-linux-gnu+icc7";
-$hierarchy{"i686-pc-linux-gnu+icc8"}          = "i686-pc-linux-gnu+icc7.1";
-$hierarchy{"i686-pc-linux-gnu+icc9"}          = "i686-pc-linux-gnu+icc8";
-$hierarchy{"i686-pc-linux-gnu+icc10"}         = "i686-pc-linux-gnu+icc9";
-$hierarchy{"i686-pc-linux-gnu+icc11"}         = "i686-pc-linux-gnu+icc10";
-
-$hierarchy{"mips-sgi-irix6.5+MIPSpro7.4"}     = "generic";
-
-$hierarchy{"x86_64-unknown-linux-gnu+gcc3.3"} = "generic";
-$hierarchy{"x86_64-unknown-linux-gnu+gcc3.4"} = "x86_64-unknown-linux-gnu+gcc3.3";
-$hierarchy{"x86_64-unknown-linux-gnu+gcc4.0"} = "x86_64-unknown-linux-gnu+gcc3.4";
-$hierarchy{"x86_64-unknown-linux-gnu+gcc4.1"} = "x86_64-unknown-linux-gnu+gcc4.0";
-$hierarchy{"x86_64-unknown-linux-gnu+gcc4.2"} = "x86_64-unknown-linux-gnu+gcc4.1";
-$hierarchy{"x86_64-unknown-linux-gnu+gcc4.3"} = "x86_64-unknown-linux-gnu+gcc4.2";
-$hierarchy{"x86_64-unknown-linux-gnu+gcc4.4"} = "x86_64-unknown-linux-gnu+gcc4.3";
-$hierarchy{"x86_64-unknown-linux-gnu+gcc4.5"} = "x86_64-unknown-linux-gnu+gcc4.4";
-$hierarchy{"x86_64-unknown-linux-gnu+gcc4.6"} = "x86_64-unknown-linux-gnu+gcc4.5";
-
-$hierarchy{"x86_64-unknown-linux-gnu+icc9"}   = "x86_64-unknown-linux-gnu+gcc3.3";
-$hierarchy{"x86_64-unknown-linux-gnu+icc10"}  = "x86_64-unknown-linux-gnu+icc9";
-$hierarchy{"x86_64-unknown-linux-gnu+icc11"}  = "x86_64-unknown-linux-gnu+icc10";
-
-$hierarchy{"powerpc-apple-darwin8.8.0+gcc4.0"}  = "generic";
-$hierarchy{"powerpc-apple-darwin8.10.0+gcc4.0"} = "powerpc-apple-darwin8.8.0+gcc4.0";
-
-$hierarchy{"ia64-unknown-linux-gnu+icc9"}     = "x86_64-unknown-linux-gnu+icc9";
-$hierarchy{"ia64-unknown-linux-gnu+icc10"}    = "ia64-unknown-linux-gnu+icc9";
-
-# derive mac os x from mac os x because they use the same random number
-# generator
-$hierarchy{"i386-apple-darwin8.10.1+gcc4.0"}  = "powerpc-apple-darwin8.10.0+gcc4.0";
-
-
-$configuration = $ARGV[0];
-
-# first check whether the given configuration is known at all. if not,
-# we don't know anything about the hierarchy we have to search, but we should
-# certainly search under the name of this configuration as well as the generic
-# one as well
-if (! defined $hierarchy{$configuration}) {
-    print "$configuration generic\n";
-    exit;
-}
-
-# so the configuration is known. now output a list of files that we
-# will have to check for results:
-$name_list = "$configuration";
-while (defined $hierarchy{$configuration}) {
-    $name_list = "$name_list $hierarchy{$configuration}";
-    $configuration = $hierarchy{$configuration};
-}
-print "$name_list\n";
-
diff --git a/tests/report-build-tests.pl b/tests/report-build-tests.pl
deleted file mode 100644 (file)
index ad26f56..0000000
+++ /dev/null
@@ -1,290 +0,0 @@
-############################################################
-$compiler_table{"gcc295"} = "gcc 2.95";
-$compiler_table{"gcc30"} = "gcc 3.0";
-$compiler_table{"gcc31"} = "gcc 3.1";
-$compiler_table{"icc50"} = "Intel ICC 5.0";
-$compiler_table{"icc60"} = "Intel ICC 6.0";
-
-# first read in list of test results
-while (<>)
-{
-    if (/([\d-]+) ([\d:]*) ([^\s]+) (.*)/)
-    {
-       $date   = $1;
-       $time   = $2;
-       $name   = $3;
-       $result = $4;
-
-       $total_testcases{$date}++;
-
-       # first extract from the data an alternative text, so that if you hover
-       # over the image with the mouse you'll see a text describing which
-       # compiler was used, which date and time.
-       $system = $name;   $system =~ s/\+.*//g;
-       $compiler = $name; $compiler =~ s/.*\+//g;
-       $alt = "System=$system; Compiler=$compiler_table{$compiler}; Date=$date; Time=$time";
-
-       if ($result eq '+') {
-           $results{$date}{$name} 
-           = "<img src=\"pictures/ok.gif\" size=\"1\" alt=\"$alt\">";
-       }
-       else
-       {
-           # $result contains the minus to indicate failure, but then also filename
-           # in which the logs are stored of that failed build. Cross-link with
-           # the red cross symbol to a copy of that file. For this, get filename only
-           $result =~ s/^- //;
-           $result =~ s#.*/##g;
-           $results{$date}{$name}
-           = '<a href="build-reports/' . 
-             $result . 
-             '" target="_top"><img src="pictures/fail.gif" size="1"' . 
-             " alt=\"$alt\"" .
-             '></a>';
-           $failed_testcases{$date}++;
-       };
-    }
-}
-
-
-# generate a list of test case names and assign a number
-# in alphabetical order to them
-foreach $date (keys %results) {
-    foreach $name (keys %{ $results{$date} }) {
-       $testcase{$name} = 0;
-    }
-}
-$next_index = 1;
-foreach $name (sort keys %testcase) {
-    $testcase{$name} = $next_index++;
-}
-
-
-
-
-###########################################################
-# then generate output for the three frames and the panels for 
-# the different months
-
-# first get last active month for the default panel
-foreach $date (sort {$b cmp $a} keys %results)
-{
-    $date =~ /(\d+)-(\d+)-\d+/;
-    $default_year  = $1;
-    $default_month = $2;
-    last;
-}
-
-
-
-open REPORT_FILE, ">builds_report.html";
-
-print REPORT_FILE <<"EOT"
-<HTML>
-<head>
-    <link href="screen.css" rel="StyleSheet" title="deal.II Homepage" media="screen">
-    <link href="print.css" rel="StyleSheet" title="deal.II Homepage" media="print">
-    <meta name="author" content="The deal.II authors">
-    <meta name="keywords" content="deal.II"></head>
-<title>Build tests</title>
-</head>
-
-<frameset rows="120,*,120" border=2>
-<frame name="report_head"    src="builds_report_head.html"    frameborder="yes">
-<frame name="report_results" src="builds_report_${default_year}_${default_month}.html" frameborder="yes">
-<frame name="report_names"   src="builds_report_names.html"   frameborder="yes">
-</frameset>
-</html>
-EOT
-    ;
-
-
-open HEAD_FILE, ">builds_report_head.html";
-print HEAD_FILE << 'EOT'
-<HTML>
-<head>
-    <link href="screen.css" rel="StyleSheet" title="deal.II Homepage" media="screen">
-    <link href="print.css" rel="StyleSheet" title="deal.II Homepage" media="print">
-    <meta name="author" content="The deal.II authors">
-    <meta name="keywords" content="deal.II"></head>
-<title>Build tests head</title>
-</head>
-<body>
-<h1 align="center">Build tests</h1>
-<p align="center">
-Select results for one of the following months:<br>
-EOT
-    ;
-
-open NAMES_FILE, ">builds_report_names.html";
-print NAMES_FILE << 'EOT'
-<HTML>
-<head>
-    <link href="screen.css" rel="StyleSheet" title="deal.II Homepage" media="screen">
-    <link href="print.css" rel="StyleSheet" title="deal.II Homepage" media="print">
-    <meta name="author" content="The deal.II authors">
-    <meta name="keywords" content="deal.II"></head>
-<title>Build tests head</title>
-</head>
-<body>
-EOT
-    ;
-
-
-
-
-# finally output a table of results
-$number_of_present_month = 0;
-foreach $date (sort {$b cmp $a} keys %results)
-{
-    # if the month has changed (or if this is the first month we deal
-    # with), open a new file and write the file and table heads. also write
-    # a note into the head panel
-    #
-    # if this is not the first month, then put in a break into the table
-    # to avoid overly long tables which browsers take infinitely
-    # long to render
-    $date =~ /(\d+)-(\d+)-\d+/;
-    $this_year  = $1;
-    $this_month = $2;
-    if ($this_month != $old_month) {
-       $number_of_present_month++;
-
-       if (defined $old_month) {
-           print TABLE_FILE "</table>\n";
-           print TABLE_FILE "</body>\n</html>\n";
-           close TABLE_FILE;
-       }
-       $file = "builds_report_${this_year}_${this_month}.html";
-       use Cwd;
-       $dir = cwd();
-       open TABLE_FILE, ">$file" or die "Can't open output file $file in $dir\n";
-
-print TABLE_FILE <<"EOT"
-<HTML>
-<head>
-    <link href="screen.css" rel="StyleSheet" title="deal.II Homepage" media="screen">
-    <link href="print.css" rel="StyleSheet" title="deal.II Homepage" media="print">
-    <meta name="author" content="The deal.II authors">
-    <meta name="keywords" content="deal.II"></head>
-<title>Build tests for $year/$date</title>
-</head>
-<body>
-
-<h3 align="center">Results for $this_year/$this_month</h3>
-<table align="center">
-<tr><th>Date <th> Fail
-EOT
-    ;
-
-       for ($i=1;$i<$next_index;$i++)
-       {
-           printf TABLE_FILE "<th><small>%02d</small>", $i;
-       }
-       print TABLE_FILE "\n";
-
-       
-       # only write up to 8 months in a row into the month
-       # listing. if more, insert a linebreak
-       if (($number_of_present_month % 8 == 0) &&
-           ($number_of_present_month != 0)) 
-       {
-           print HEAD_FILE "<br>\n";
-       }
-       # now write link to month file
-       print HEAD_FILE "<a href=\"$file\" target=\"report_results\">";
-       print HEAD_FILE "${this_year}/${this_month}</a>&nbsp;&nbsp;\n";
-    }
-
-    print TABLE_FILE "<tr><td>$date  ";
-
-    $failed_testcases{$date} = 0 if (!defined $failed_testcases{$date});
-
-    print TABLE_FILE "<td><b style=\"color:blue;\">" if ($failed_testcases{$date} == 0);
-    print TABLE_FILE "<td><b style=\"color:red;\">" if ($failed_testcases{$date} != 0);
-
-    print TABLE_FILE "$failed_testcases{$date}/$total_testcases{$date}</b></td>";
-
-    foreach $name (sort keys %testcase)
-    {
-       $_ = $results{$date}{$name};
-       print TABLE_FILE '<td> ', $_, '</td>';
-    }
-    print TABLE_FILE "</tr></td>\n";
-
-    # store old month name for the next iteration of the loop
-    $old_month = $this_month;
-}
-
-print TABLE_FILE << 'EOT'
-</table>
-</body>
-</html>
-EOT
-    ;
-
-
-# now print the names of the tests, in two blocks of 3 columns each. have an
-# empty column of specified width in between, to separate the blocks
-print NAMES_FILE << 'EOT'
-<h3 align="center">Names of build tests</h3>
-<table align="center">
-<tr>
-  <td align="center"><strong> Test number </strong></td>
-  <td align="center"><strong> System name </strong></td>
-  <td align="center"><strong> Compiler    </strong></td>
-  <td style="center">------------------</td>
-  <td align="center"><strong> Test number </strong></td>
-  <td align="center"><strong> System name </strong></td>
-  <td align="center"><strong> Compiler    </strong></td>
-</tr>
-EOT
-    ;
-
-
-# output the list of test cases. always put two in a row
-$col = 0;
-foreach $name (sort keys %testcase) {
-    if ($col == 0) {
-       print NAMES_FILE "<tr>\n";
-    }
-
-    $test_number   = $testcase{$name};
-    $test_system   = $name;
-    $test_system   =~ s/\+.*//;
-    $test_compiler = $name;
-    $test_compiler =~ s/.*\+//g;
-    if (defined $compiler_table{$test_compiler} ) {
-       $test_compiler = $compiler_table{$test_compiler};
-    }
-
-    print NAMES_FILE "   <td align=\"center\"><strong>${test_number}</strong></td>",
-                     "   <td align=\"center\">${test_system}</td>",
-                     "   <td align=\"center\">${test_compiler}</td>\n";
-
-    # next column. if at end, wrap around
-    $col = ($col+1)%2;
-
-    # if at end of row, then end it, otherwise insert the empty column
-    if ($col == 0) {
-       print NAMES_FILE "</tr>\n";
-    } else { 
-       print NAMES_FILE "<td></td>"; 
-    }
-}
-
-print NAMES_FILE <<'EOT'
-</table>
-</body>
-</html>
-EOT
-    ;
-
-
-
-print HEAD_FILE << 'EOT'
-</p>
-</body>
-</html>
-EOT
-    ;
diff --git a/tests/report-regression-tests.pl b/tests/report-regression-tests.pl
deleted file mode 100644 (file)
index 1a164f5..0000000
+++ /dev/null
@@ -1,244 +0,0 @@
-############################################################
-# first read in list of test results
-while (<>)
-{
-    $dir = $1 if (m/=====Report: ([^ ]+)/);
-    if (/([\d-]+) ([\d:]*) ([+-]) (.*)/)
-    {
-       $date   = $1;
-       $time   = $2;
-       $result = $3;
-       $name   = $4;
-
-       $total_testcases{$date}++;
-
-       if ($result eq '+') {
-           $results{$date}{$dir.':'.$name} 
-           = '<img src="pictures/ok.gif" size="1">';
-       }
-       else
-       {
-           $results{$date}{$dir.':'.$name}
-           = '<img src="pictures/fail.gif" size="1">';
-           $failed_testcases{$date}++;
-       };
-    }
-}
-
-
-# generate a list of test case names and assign a number
-# in alphabetical order to them
-foreach $date (keys %results) {
-    foreach $name (keys %{ $results{$date} }) {
-       $testcase{$name} = 0;
-    }
-}
-$next_index = 1;
-foreach $name (sort keys %testcase) {
-    $testcase{$name} = $next_index++;
-}
-
-
-
-
-###########################################################
-# then generate output for the three frames and the panels for 
-# the different months
-
-# first get last active month for the default panel
-foreach $date (sort {$b cmp $a} keys %results)
-{
-    $date =~ /(\d+)-(\d+)-\d+/;
-    $default_year  = $1;
-    $default_month = $2;
-    last;
-}
-
-
-
-open REPORT_FILE, ">tests_report.html";
-
-print REPORT_FILE <<"EOT"
-<HTML>
-<head>
-    <link href="screen.css" rel="StyleSheet" title="deal.II Homepage" media="screen">
-    <link href="print.css" rel="StyleSheet" title="deal.II Homepage" media="print">
-    <meta name="author" content="The deal.II authors">
-    <meta name="keywords" content="deal.II"></head>
-<title>Regression tests</title>
-</head>
-
-<frameset rows="20%,40%,40%" border=2>
-<frame name="report_head"    src="tests_report_head.html"    frameborder="yes">
-<frame name="report_results" src="tests_report_${default_year}_${default_month}.html" frameborder="yes">
-<frame name="report_names"   src="tests_report_names.html"   frameborder="yes">
-</frameset>
-</html>
-EOT
-    ;
-
-
-open HEAD_FILE, ">tests_report_head.html";
-print HEAD_FILE << 'EOT'
-<HTML>
-<head>
-    <link href="screen.css" rel="StyleSheet" title="deal.II Homepage" media="screen">
-    <link href="print.css" rel="StyleSheet" title="deal.II Homepage" media="print">
-    <meta name="author" content="The deal.II authors">
-    <meta name="keywords" content="deal.II"></head>
-<title>Regression tests head</title>
-</head>
-<body>
-<h1 align="center">Regression tests</h1>
-<p align="center">
-Select results for one of the following months:<br>
-EOT
-    ;
-
-open NAMES_FILE, ">tests_report_names.html";
-print NAMES_FILE << 'EOT'
-<HTML>
-<head>
-    <link href="screen.css" rel="StyleSheet" title="deal.II Homepage" media="screen">
-    <link href="print.css" rel="StyleSheet" title="deal.II Homepage" media="print">
-    <meta name="author" content="The deal.II authors">
-    <meta name="keywords" content="deal.II"></head>
-<title>Regression tests head</title>
-</head>
-<body>
-EOT
-    ;
-
-
-
-
-# finally output a table of results
-$number_of_present_month = 0;
-foreach $date (sort {$b cmp $a} keys %results)
-{
-    # if the month has changed (or if this is the first month we deal
-    # with), open a new file and write the file and table heads. also write
-    # a note into the head panel
-    #
-    # if this is not the first month, then put in a break into the table
-    # to avoid overly long tables which browsers take infinitely
-    # long to render
-    $date =~ /(\d+)-(\d+)-\d+/;
-    $this_year  = $1;
-    $this_month = $2;
-    if ($this_month != $old_month) {
-       $number_of_present_month++;
-
-       if (defined $old_month) {
-           print TABLE_FILE "</table>\n";
-           print TABLE_FILE "</body>\n</html>\n";
-           close TABLE_FILE;
-       }
-       $file = "tests_report_${this_year}_${this_month}.html";
-       use Cwd;
-       $dir = cwd();
-       open TABLE_FILE, ">$file" or die "Can't open output file $file in $dir\n";
-
-print TABLE_FILE <<"EOT"
-<HTML>
-<head>
-    <link href="screen.css" rel="StyleSheet" title="deal.II Homepage" media="screen">
-    <link href="print.css" rel="StyleSheet" title="deal.II Homepage" media="print">
-    <meta name="author" content="The deal.II authors">
-    <meta name="keywords" content="deal.II"></head>
-<title>Regression tests for $year/$date</title>
-</head>
-<body>
-
-<h3 align="center">Results for $this_year/$this_month</h3>
-<table>
-<tr><th>Date <th> Fail
-EOT
-    ;
-
-       for ($i=1;$i<$next_index;$i++)
-       {
-           printf TABLE_FILE "<th><small>%02d</small>", $i;
-       }
-       print TABLE_FILE "\n";
-
-       
-       # only write up to 8 months in a row into the month
-       # listing. if more, insert a linebreak
-       if (($number_of_present_month % 8 == 0) &&
-           ($number_of_present_month != 0)) 
-       {
-           print HEAD_FILE "<br>\n";
-       }
-       # now write link to month file
-       print HEAD_FILE "<a href=\"$file\" target=\"report_results\">";
-       print HEAD_FILE "${this_year}/${this_month}</a>&nbsp;&nbsp;\n";
-    }
-
-    print TABLE_FILE "<tr><td>$date  ";
-
-    $failed_testcases{$date} = 0 if (!defined $failed_testcases{$date});
-
-    print TABLE_FILE "<td><b style=\"color:blue;\">" if ($failed_testcases{$date} == 0);
-    print TABLE_FILE "<td><b style=\"color:red;\">" if ($failed_testcases{$date} != 0);
-
-    print TABLE_FILE "$failed_testcases{$date}/$total_testcases{$date}</b></td>";
-
-    foreach $name (sort keys %testcase)
-    {
-       $_ = $results{$date}{$name};
-       print TABLE_FILE '<td> ', $_, '</td>';
-    }
-    print TABLE_FILE "</tr></td>\n";
-
-    # store old month name for the next iteration of the loop
-    $old_month = $this_month;
-}
-
-print TABLE_FILE << 'EOT'
-</table>
-</body>
-</html>
-EOT
-    ;
-
-print NAMES_FILE << 'EOT'
-<h3 align="center">Names of test programs</h3>
-<small>
-<table>
-EOT
-    ;
-
-
-# output the list of test cases. always put four in a row
-$col = 0;
-foreach $name (sort keys %testcase) {
-    if ($col == 0) {
-       print NAMES_FILE "<tr>\n";
-    }
-    print NAMES_FILE "   <td><small>$testcase{$name}</small></td>",
-                     "   <td><small>$name</small></td>\n";
-
-    # next column. if at end, wrap around
-    $col = ($col+1)%4;
-
-    if ($col == 0) {
-       print NAMES_FILE "</tr>\n";
-    }
-}
-
-print NAMES_FILE <<'EOT'
-</table>
-</body>
-</html>
-EOT
-    ;
-
-
-
-print HEAD_FILE << 'EOT'
-</p>
-</body>
-</html>
-EOT
-    ;
diff --git a/tests/report.pl b/tests/report.pl
deleted file mode 100644 (file)
index c672bf9..0000000
+++ /dev/null
@@ -1,85 +0,0 @@
-print <<'EOT'
-<HTML>
-<head>
-<title>Regression tests</title>
-</head>
-<body>
-<h1>Regression tests</h1>
-<h2>Results</h2>
-<table>
-<tr><th>Date
-EOT
-    ;
-
-
-# read in list of test results
-while (<>)
-{
-    $dir = $1 if (m/=====Report: ([^ ]+)/);
-    if (/([\d-]+) ([\d:]*) ([+-]) (.*)/)
-    {
-       $date   = $1;
-       $time   = $2;
-       $result = $3;
-       $name   = $4;
-
-       $results{$date}{$dir.':'.$name} = $result;
-    }
-}
-
-
-# generate a list of test case names and assign a number
-# in alphabetical order to them
-foreach $date (keys %results) {
-    foreach $name (keys %{ $results{$date} }) {
-       $testcase{$name} = 0;
-    }
-}
-$next_index = 1;
-foreach $name (sort keys %testcase) {
-    $testcase{$name} = $next_index++;
-}
-
-for ($i=1;$i<$next_index;$i++)
-{
-    printf "<th>%02d", $i;
-}
-
-# finally output a table of results
-foreach $date (sort keys %results) {
-    print "<tr><td>$date  ";
-    foreach $name (sort keys %testcase) {
-       $_ = $results{$date}{$name};
-       if (/-/)
-       {
-           print '<th> <font color="red">X</font>';
-       } elsif (/\+/)
-       {
-           print '<th> <font color="green">O</font>';
-       } else {
-           print '<th>?';
-       }
-    }
-    print "\n";
-}
-
-print << 'EOT'
-</table>
-
-<h2>Names of test programs</h2>
-<table>
-EOT
-    ;
-
-
-# output the list of test cases
-foreach $name (sort keys %testcase) {
-    print "<tr><td>$testcase{$name} <td>$name\n";
-}
-
-print <<'EOT'
-</table>
-</body>
-</html>
-EOT
-    ;
diff --git a/tests/status_to_report.pl b/tests/status_to_report.pl
deleted file mode 100644 (file)
index f45b00a..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
-# $Id$
-
-# Convert the contents of the OK file to a key readable by the
-# database system for regression tests
-
-# used by tests/Makefile.rules
-
-
-my $contents = <>;
-
-$contents =~ s/\s+//g;
-
-if ($contents eq 'diffok')
-{
-    print '  + ';
-}
-elsif ($contents eq 'Compiling')
-{
-    print ' 0  ';
-}
-elsif ($contents eq 'Linking')
-{
-    print ' 1  ';
-}
-elsif ($contents eq 'Running')
-{
-    print ' 2  ';
-}
-elsif ($contents eq 'Checking')
-{
-    print ' 3  ';
-}
-else
-{
-    print ' ?? ';
-}
diff --git a/tests/try_replace.sh b/tests/try_replace.sh
deleted file mode 100755 (executable)
index a59d946..0000000
+++ /dev/null
@@ -1,18 +0,0 @@
-#!/bin/bash
-
-cd $1/cmp
-echo Files: *
-for name in * ; do
-    echo Comparing file $name
-    if diff -w ../output $name > ../DIFF_$name ; then
-       exit;
-    else
-       less ../DIFF_$name
-       rm ../DIFF_$name
-       echo "Replace compare file? (y/n)"
-       read
-       if test "x$REPLY" == "xy" ; then
-           cp ../output $name
-       fi
-    fi
-done

In the beginning the Universe was created. This has made a lot of people very angry and has been widely regarded as a bad move.

Douglas Adams


Typeset in Trocchi and Trocchi Bold Sans Serif.