#! /bin/sh
# From configure.in Revision: 27277 .
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.65 for deal.II 7.3.pre.
+# Generated by GNU Autoconf 2.69 for deal.II 7.3.0.
#
# Report bugs to <dealii@dealii.org>.
#
#
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
-# Inc.
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
#
#
# This configure script is free software; the Free Software Foundation
IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
case $0 in #((
*[\\/]* ) as_myself=$0 ;;
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
# CDPATH.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+# Use a proper internal environment variable to ensure we don't fall
+ # into an infinite loop, continuously re-executing ourselves.
+ if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+ _as_can_reexec=no; export _as_can_reexec;
+ # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+ fi
+ # We don't want this to propagate to other subprocesses.
+ { _as_can_reexec=; unset _as_can_reexec;}
if test "x$CONFIG_SHELL" = x; then
as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
else
exitcode=1; echo positional parameters were not saved.
fi
-test x\$exitcode = x0 || exit 1"
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
if test "x$CONFIG_SHELL" != x; then :
- # We cannot yet assume a decent shell, so we have to provide a
- # neutralization value for shells without unset; and this also
- # works around shells that cannot unset nonexistent variables.
- BASH_ENV=/dev/null
- ENV=/dev/null
- (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+ export CONFIG_SHELL
+ # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
fi
if test x$as_have_required = xno; then :
test -d "$as_dir" && break
done
test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
} # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+} # as_fn_executable_p
# as_fn_append VAR VALUE
# ----------------------
# Append the text in VALUE to the end of the definition contained in VAR. Take
fi # as_fn_arith
-# as_fn_error ERROR [LINENO LOG_FD]
-# ---------------------------------
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with status $?, using 1 if that was 0.
+# script with STATUS, using 1 if that was 0.
as_fn_error ()
{
- as_status=$?; test $as_status -eq 0 && as_status=1
- if test "$3"; then
- as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
fi
- $as_echo "$as_me: error: $1" >&2
+ $as_echo "$as_me: error: $2" >&2
as_fn_exit $as_status
} # as_fn_error
chmod +x "$as_me.lineno" ||
{ $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+ # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+ # already done that, so ensure we don't try to do so again and fall
+ # in an infinite loop. This has already happened in practice.
+ _as_can_reexec=no; export _as_can_reexec
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
# original and so on. Autoconf is especially sensitive to this).
# ... but there are two gotchas:
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
+ # In both cases, we have to default to `cp -pR'.
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
fi
else
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
as_mkdir_p=false
fi
-if test -x / >/dev/null 2>&1; then
- as_test_x='test -x'
-else
- if ls -dL / >/dev/null 2>&1; then
- as_ls_L_option=L
- else
- as_ls_L_option=
- fi
- as_test_x='
- eval sh -c '\''
- if test -d "$1"; then
- test -d "$1/.";
- else
- case $1 in #(
- -*)set "./$1";;
- esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
- ???[sx]*):;;*)false;;esac;fi
- '\'' sh
- '
-fi
-as_executable_p=$as_test_x
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
exec 6>&1
# Name of the host.
-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
# so uname gets run too.
ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
# Identity of this package.
PACKAGE_NAME='deal.II'
PACKAGE_TARNAME='deal.II'
-PACKAGE_VERSION='7.3.pre'
-PACKAGE_STRING='deal.II 7.3.pre'
+PACKAGE_VERSION='7.3.0'
+PACKAGE_STRING='deal.II 7.3.0'
PACKAGE_BUGREPORT='dealii@dealii.org'
PACKAGE_URL=''
fi
case $ac_option in
- *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
- *) ac_optarg=yes ;;
+ *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+ *=) ac_optarg= ;;
+ *) ac_optarg=yes ;;
esac
# Accept the important Cygnus configure options, so we can diagnose typos.
ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error "invalid feature name: $ac_useropt"
+ as_fn_error $? "invalid feature name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error "invalid feature name: $ac_useropt"
+ as_fn_error $? "invalid feature name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error "invalid package name: $ac_useropt"
+ as_fn_error $? "invalid package name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error "invalid package name: $ac_useropt"
+ as_fn_error $? "invalid package name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
x_libraries=$ac_optarg ;;
- -*) as_fn_error "unrecognized option: \`$ac_option'
-Try \`$0 --help' for more information."
+ -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
;;
*=*)
# Reject names that are not valid shell variable names.
case $ac_envvar in #(
'' | [0-9]* | *[!_$as_cr_alnum]* )
- as_fn_error "invalid variable name: \`$ac_envvar'" ;;
+ as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
esac
eval $ac_envvar=\$ac_optarg
export $ac_envvar ;;
$as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
$as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
- : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+ : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
;;
esac
if test -n "$ac_prev"; then
ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- as_fn_error "missing argument to $ac_option"
+ as_fn_error $? "missing argument to $ac_option"
fi
if test -n "$ac_unrecognized_opts"; then
case $enable_option_checking in
no) ;;
- fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;;
+ fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
*) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
esac
fi
[\\/$]* | ?:[\\/]* ) continue;;
NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
esac
- as_fn_error "expected an absolute directory name for --$ac_var: $ac_val"
+ as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
done
# There might be people who depend on the old broken behavior: `$host'
if test "x$host_alias" != x; then
if test "x$build_alias" = x; then
cross_compiling=maybe
- $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
- If a cross compiler is detected then cross compile mode will be used." >&2
elif test "x$build_alias" != "x$host_alias"; then
cross_compiling=yes
fi
ac_pwd=`pwd` && test -n "$ac_pwd" &&
ac_ls_di=`ls -di .` &&
ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
- as_fn_error "working directory cannot be determined"
+ as_fn_error $? "working directory cannot be determined"
test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
- as_fn_error "pwd does not report name of working directory"
+ as_fn_error $? "pwd does not report name of working directory"
# Find the source files, if location was not specified.
fi
if test ! -r "$srcdir/$ac_unique_file"; then
test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
- as_fn_error "cannot find sources ($ac_unique_file) in $srcdir"
+ as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
fi
ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
ac_abs_confdir=`(
- cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg"
+ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
pwd)`
# When building in place, set srcdir=.
if test "$ac_abs_confdir" = "$ac_pwd"; then
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures deal.II 7.3.pre to adapt to many kinds of systems.
+\`configure' configures deal.II 7.3.0 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
--help=short display options specific to this package
--help=recursive display the short help of all the included packages
-V, --version display version information and exit
- -q, --quiet, --silent do not print \`checking...' messages
+ -q, --quiet, --silent do not print \`checking ...' messages
--cache-file=FILE cache test results in FILE [disabled]
-C, --config-cache alias for \`--cache-file=config.cache'
-n, --no-create do not create output files
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of deal.II 7.3.pre:";;
+ short | recursive ) echo "Configuration of deal.II 7.3.0:";;
esac
cat <<\_ACEOF
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-deal.II configure 7.3.pre
-generated by GNU Autoconf 2.65
+deal.II configure 7.3.0
+generated by GNU Autoconf 2.69
-Copyright (C) 2009 Free Software Foundation, Inc.
+Copyright (C) 2012 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
ac_retval=1
fi
- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
as_fn_set_status $ac_retval
} # ac_fn_c_try_compile
ac_retval=1
fi
- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
as_fn_set_status $ac_retval
} # ac_fn_cxx_try_compile
test ! -s conftest.err
} && test -s conftest$ac_exeext && {
test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
+ test -x conftest$ac_exeext
}; then :
ac_retval=0
else
# interfere with the next link command; also delete a directory that is
# left behind by Apple's compiler. We do this before executing the actions.
rm -rf conftest.dSYM conftest_ipa8_conftest.oo
- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
as_fn_set_status $ac_retval
} # ac_fn_cxx_try_link
ac_retval=$ac_status
fi
rm -rf conftest.dSYM conftest_ipa8_conftest.oo
- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
as_fn_set_status $ac_retval
} # ac_fn_cxx_try_run
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval \${$3+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
eval ac_res=\$$3
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
} # ac_fn_cxx_check_func
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval \${$3+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
eval ac_res=\$$3
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
} # ac_fn_cxx_check_header_compile
mv -f conftest.er1 conftest.err
fi
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } >/dev/null && {
+ test $ac_status = 0; } > conftest.i && {
test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
test ! -s conftest.err
}; then :
ac_retval=1
fi
- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
as_fn_set_status $ac_retval
} # ac_fn_cxx_try_cpp
ac_fn_cxx_check_header_mongrel ()
{
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+ if eval \${$3+:} false; then :
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval \${$3+:} false; then :
$as_echo_n "(cached) " >&6
fi
eval ac_res=\$$3
else
ac_header_preproc=no
fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
$as_echo "$ac_header_preproc" >&6; }
$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;}
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
-( cat <<\_ASBOX
-## -------------------------------- ##
+( $as_echo "## -------------------------------- ##
## Report this to dealii@dealii.org ##
-## -------------------------------- ##
-_ASBOX
+## -------------------------------- ##"
) | sed "s/^/$as_me: WARNING: /" >&2
;;
esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval \${$3+:} false; then :
$as_echo_n "(cached) " >&6
else
eval "$3=\$ac_header_compiler"
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
fi
- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
} # ac_fn_cxx_check_header_mongrel
cat >config.log <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by deal.II $as_me 7.3.pre, which was
-generated by GNU Autoconf 2.65. Invocation command line was
+It was created by deal.II $as_me 7.3.0, which was
+generated by GNU Autoconf 2.69. Invocation command line was
$ $0 $@
{
echo
- cat <<\_ASBOX
-## ---------------- ##
+ $as_echo "## ---------------- ##
## Cache variables. ##
-## ---------------- ##
-_ASBOX
+## ---------------- ##"
echo
# The following way of writing the cache mishandles newlines in values,
(
)
echo
- cat <<\_ASBOX
-## ----------------- ##
+ $as_echo "## ----------------- ##
## Output variables. ##
-## ----------------- ##
-_ASBOX
+## ----------------- ##"
echo
for ac_var in $ac_subst_vars
do
echo
if test -n "$ac_subst_files"; then
- cat <<\_ASBOX
-## ------------------- ##
+ $as_echo "## ------------------- ##
## File substitutions. ##
-## ------------------- ##
-_ASBOX
+## ------------------- ##"
echo
for ac_var in $ac_subst_files
do
fi
if test -s confdefs.h; then
- cat <<\_ASBOX
-## ----------- ##
+ $as_echo "## ----------- ##
## confdefs.h. ##
-## ----------- ##
-_ASBOX
+## ----------- ##"
echo
cat confdefs.h
echo
ac_site_file1=NONE
ac_site_file2=NONE
if test -n "$CONFIG_SITE"; then
- ac_site_file1=$CONFIG_SITE
+ # We do not want a PATH search for config.site.
+ case $CONFIG_SITE in #((
+ -*) ac_site_file1=./$CONFIG_SITE;;
+ */*) ac_site_file1=$CONFIG_SITE;;
+ *) ac_site_file1=./$CONFIG_SITE;;
+ esac
elif test "x$prefix" != xNONE; then
ac_site_file1=$prefix/share/config.site
ac_site_file2=$prefix/etc/config.site
{ $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
$as_echo "$as_me: loading site script $ac_site_file" >&6;}
sed 's/^/| /' "$ac_site_file" >&5
- . "$ac_site_file"
+ . "$ac_site_file" \
+ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
fi
done
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
{ $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
- as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+ as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
fi
## -------------------- ##
## Main body of script. ##
ac_aux_dir=
for ac_dir in contrib/config "$srcdir"/contrib/config; do
- for ac_t in install-sh install.sh shtool; do
- if test -f "$ac_dir/$ac_t"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/$ac_t -c"
- break 2
- fi
- done
+ if test -f "$ac_dir/install-sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f "$ac_dir/install.sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f "$ac_dir/shtool"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
done
if test -z "$ac_aux_dir"; then
- as_fn_error "cannot find install-sh, install.sh, or shtool in contrib/config \"$srcdir\"/contrib/config" "$LINENO" 5
+ as_fn_error $? "cannot find install-sh, install.sh, or shtool in contrib/config \"$srcdir\"/contrib/config" "$LINENO" 5
fi
# These three variables are undocumented and unsupported,
# Make sure we can run config.sub.
$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
- as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+ as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
$as_echo_n "checking build system type... " >&6; }
-if test "${ac_cv_build+set}" = set; then :
+if ${ac_cv_build+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_build_alias=$build_alias
test "x$ac_build_alias" = x &&
ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
test "x$ac_build_alias" = x &&
- as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5
+ as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
- as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
$as_echo "$ac_cv_build" >&6; }
case $ac_cv_build in
*-*-*) ;;
-*) as_fn_error "invalid value of canonical build" "$LINENO" 5;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
esac
build=$ac_cv_build
ac_save_IFS=$IFS; IFS='-'
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
$as_echo_n "checking host system type... " >&6; }
-if test "${ac_cv_host+set}" = set; then :
+if ${ac_cv_host+:} false; then :
$as_echo_n "(cached) " >&6
else
if test "x$host_alias" = x; then
ac_cv_host=$ac_cv_build
else
ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
- as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
fi
fi
$as_echo "$ac_cv_host" >&6; }
case $ac_cv_host in
*-*-*) ;;
-*) as_fn_error "invalid value of canonical host" "$LINENO" 5;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
esac
host=$ac_cv_host
ac_save_IFS=$IFS; IFS='-'
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5
$as_echo_n "checking target system type... " >&6; }
-if test "${ac_cv_target+set}" = set; then :
+if ${ac_cv_target+:} false; then :
$as_echo_n "(cached) " >&6
else
if test "x$target_alias" = x; then
ac_cv_target=$ac_cv_host
else
ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
- as_fn_error "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5
fi
fi
$as_echo "$ac_cv_target" >&6; }
case $ac_cv_target in
*-*-*) ;;
-*) as_fn_error "invalid value of canonical target" "$LINENO" 5;;
+*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5;;
esac
target=$ac_cv_target
ac_save_IFS=$IFS; IFS='-'
set dummy $ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CXX+set}" = set; then :
+if ${ac_cv_prog_CXX+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$CXX"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_CXX="$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for MPI C++ compiler" >&5
$as_echo_n "checking for MPI C++ compiler... " >&6; }
if test "x$CXX" = "x" ; then
- as_fn_error "none found" "$LINENO" 5
+ as_fn_error $? "none found" "$LINENO" 5
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5
$as_echo "$CXX" >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: mpicc" >&5
$as_echo "mpicc" >&6; }
else
- as_fn_error "no MPI C compiler found" "$LINENO" 5
+ as_fn_error $? "no MPI C compiler found" "$LINENO" 5
fi
fi
set dummy ${ac_tool_prefix}gcc; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
+if ${ac_cv_prog_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_CC="${ac_tool_prefix}gcc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy gcc; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_CC"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_CC="gcc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy ${ac_tool_prefix}cc; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
+if ${ac_cv_prog_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_CC="${ac_tool_prefix}cc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy cc; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
+if ${ac_cv_prog_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
ac_prog_rejected=yes
continue
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
+if ${ac_cv_prog_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy $ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_CC"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_CC="$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "no acceptable C compiler found in \$PATH
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
# Provide some information about the compiler.
$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ as_fn_set_status 77
-as_fn_error "C compiler cannot create executables
-See \`config.log' for more details." "$LINENO" 5; }; }
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
else
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
fi
rm -f conftest conftest$ac_cv_exeext
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
else
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot run C compiled programs.
+as_fn_error $? "cannot run C compiled programs.
If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5; }
fi
fi
fi
ac_clean_files=$ac_clean_files_save
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
$as_echo_n "checking for suffix of object files... " >&6; }
-if test "${ac_cv_objext+set}" = set; then :
+if ${ac_cv_objext+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
fi
rm -f conftest.$ac_cv_objext conftest.$ac_ext
fi
ac_objext=$OBJEXT
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if test "${ac_cv_c_compiler_gnu+set}" = set; then :
+if ${ac_cv_c_compiler_gnu+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
ac_save_CFLAGS=$CFLAGS
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
$as_echo_n "checking whether $CC accepts -g... " >&6; }
-if test "${ac_cv_prog_cc_g+set}" = set; then :
+if ${ac_cv_prog_cc_g+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_save_c_werror_flag=$ac_c_werror_flag
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if test "${ac_cv_prog_cc_c89+set}" = set; then :
+if ${ac_cv_prog_cc_c89+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_cv_prog_cc_c89=no
/* end confdefs.h. */
#include <stdarg.h>
#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
+struct stat;
/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
struct buf { int x; };
FILE * (*rcsopen) (struct buf *, struct stat *, int);
set dummy $testprog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_CC+set}" = set; then :
+if ${ac_cv_path_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
case $CC in
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_CC="$as_dir/$ac_word$ac_exec_ext"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CXX+set}" = set; then :
+if ${ac_cv_prog_CXX+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$CXX"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy $ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then :
+if ${ac_cv_prog_ac_ct_CXX+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_CXX"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_CXX="$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5
$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; }
-if test "${ac_cv_cxx_compiler_gnu+set}" = set; then :
+if ${ac_cv_cxx_compiler_gnu+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
ac_save_CXXFLAGS=$CXXFLAGS
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5
$as_echo_n "checking whether $CXX accepts -g... " >&6; }
-if test "${ac_cv_prog_cxx_g+set}" = set; then :
+if ${ac_cv_prog_cxx_g+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_save_cxx_werror_flag=$ac_cxx_werror_flag
set dummy $testprog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_CXX+set}" = set; then :
+if ${ac_cv_path_CXX+:} false; then :
$as_echo_n "(cached) " >&6
else
case $CXX in
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_CXX="$as_dir/$ac_word$ac_exec_ext"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
*7.0* | *7.1* | *7.2* | *7.3*)
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: C++ compiler is $mips_pro" >&5
$as_echo "C++ compiler is $mips_pro" >&6; }
- as_fn_error "This compiler is not supported" "$LINENO" 5
+ as_fn_error $? "This compiler is not supported" "$LINENO" 5
GXX_VERSION=MIPSpro7.3
GXX_VERSION_DETAILED="$GXX_VERSION"
;;
*7.4)
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: C++ compiler is MIPSpro compiler 7.4" >&5
$as_echo "C++ compiler is MIPSpro compiler 7.4" >&6; }
- as_fn_error "This compiler is not supported. Use MIPSPro compiler 7.4x" "$LINENO" 5
+ as_fn_error $? "This compiler is not supported. Use MIPSPro compiler 7.4x" "$LINENO" 5
GXX_VERSION=MIPSpro7.4
GXX_VERSION_DETAILED="$GXX_VERSION"
;;
if test "$cross_compiling" = yes; then :
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot run test program while cross compiling
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "cannot run test program while cross compiling
+See \`config.log' for more details" "$LINENO" 5; }
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
if test "$cross_compiling" = yes; then :
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot run test program while cross compiling
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "cannot run test program while cross compiling
+See \`config.log' for more details" "$LINENO" 5; }
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
CXXFLAGSO="$CXXFLAGSO -q -O2"
CXXFLAGSPIC=""
LDFLAGSPIC=""
- { as_fn_set_status please remove this message from aclocal.m4 and call autoconf and configure. If you do not understand this
-as_fn_error "Attention! deal.II is not known to work with Borland C++!
- If you intend to port it to Borland C++" "$LINENO" 5; }
+ as_fn_error please remove this message from aclocal.m4 and call autoconf and configure. If you do not understand this "Attention! deal.II is not known to work with Borland C++!
+ If you intend to port it to Borland C++" "$LINENO" 5
;;
pathscale_cc)
*7.0* | *7.1* | *7.2* | *7.3*)
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: C compiler is $mips_pro" >&5
$as_echo "C compiler is $mips_pro" >&6; }
- as_fn_error "This compiler is not supported" "$LINENO" 5
+ as_fn_error $? "This compiler is not supported" "$LINENO" 5
CC_VERSION=MIPSpro7.3
;;
*7.4)
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: C compiler is MIPSpro compiler 7.4" >&5
$as_echo "C compiler is MIPSpro compiler 7.4" >&6; }
- as_fn_error "This compiler is not supported. Use MIPSPro compiler 7.4x" "$LINENO" 5
+ as_fn_error $? "This compiler is not supported. Use MIPSPro compiler 7.4x" "$LINENO" 5
CC_VERSION=MIPSpro7.4
;;
*7.41* | *7.42* | *7.43* | *7.44*)
if test "$enablethreads" = yes ; then
case "$target" in
*cygwin* )
- as_fn_error "Multithreading is not supported on CygWin" "$LINENO" 5
+ as_fn_error $? "Multithreading is not supported on CygWin" "$LINENO" 5
;;
esac
if test "$thread_flag" = invalid_last_entry ; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no flag found!" >&5
$as_echo "no flag found!" >&6; }
- as_fn_error "Could not determine multithreading flag for this platform. Aborting!" "$LINENO" 5
+ as_fn_error $? "Could not determine multithreading flag for this platform. Aborting!" "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: -$thread_flag" >&5
$as_echo "-$thread_flag" >&6; }
;;
*)
- as_fn_error "No threading compiler options for this C++ compiler specified at present" "$LINENO" 5
+ as_fn_error $? "No threading compiler options for this C++ compiler specified at present" "$LINENO" 5
exit 1
;;
esac
else
- as_fn_error "not found" "$LINENO" 5
+ as_fn_error $? "not found" "$LINENO" 5
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
else
- as_fn_error "not found" "$LINENO" 5
+ as_fn_error $? "not found" "$LINENO" 5
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
else
- as_fn_error "not found" "$LINENO" 5
+ as_fn_error $? "not found" "$LINENO" 5
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
if test "$cross_compiling" = yes; then :
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot run test program while cross compiling
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "cannot run test program while cross compiling
+See \`config.log' for more details" "$LINENO" 5; }
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
_ACEOF
if ac_fn_cxx_try_run "$LINENO"; then :
- as_fn_error "impossible result -- aborting" "$LINENO" 5
+ as_fn_error $? "impossible result -- aborting" "$LINENO" 5
else
if test "$cross_compiling" = yes; then :
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot run test program while cross compiling
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "cannot run test program while cross compiling
+See \`config.log' for more details" "$LINENO" 5; }
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
_ACEOF
if ac_fn_cxx_try_run "$LINENO"; then :
- as_fn_error "impossible result -- aborting" "$LINENO" 5
+ as_fn_error $? "impossible result -- aborting" "$LINENO" 5
else
do :
as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
ac_fn_cxx_check_func "$LINENO" "$ac_func" "$as_ac_var"
-eval as_val=\$$as_ac_var
- if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
cat >>confdefs.h <<_ACEOF
#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
_ACEOF
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5
$as_echo_n "checking how to run the C++ preprocessor... " >&6; }
if test -z "$CXXCPP"; then
- if test "${ac_cv_prog_CXXCPP+set}" = set; then :
+ if ${ac_cv_prog_CXXCPP+:} false; then :
$as_echo_n "(cached) " >&6
else
# Double quotes because CXXCPP needs to be expanded
# Broken: fails on valid input.
continue
fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
# OK, works on sane cases. Now check whether nonexistent headers
# can be detected and how.
ac_preproc_ok=:
break
fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
done
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.i conftest.err conftest.$ac_ext
if $ac_preproc_ok; then :
break
fi
# Broken: fails on valid input.
continue
fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
# OK, works on sane cases. Now check whether nonexistent headers
# can be detected and how.
ac_preproc_ok=:
break
fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
done
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.i conftest.err conftest.$ac_ext
if $ac_preproc_ok; then :
else
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "C++ preprocessor \"$CXXCPP\" fails sanity check
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
fi
ac_ext=cpp
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
-if test "${ac_cv_path_GREP+set}" = set; then :
+if ${ac_cv_path_GREP+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -z "$GREP"; then
for ac_prog in grep ggrep; do
for ac_exec_ext in '' $ac_executable_extensions; do
ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
- { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+ as_fn_executable_p "$ac_path_GREP" || continue
# Check for GNU ac_path_GREP and select it if it is found.
# Check for GNU $ac_path_GREP
case `"$ac_path_GREP" --version 2>&1` in
done
IFS=$as_save_IFS
if test -z "$ac_cv_path_GREP"; then
- as_fn_error "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
fi
else
ac_cv_path_GREP=$GREP
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
$as_echo_n "checking for egrep... " >&6; }
-if test "${ac_cv_path_EGREP+set}" = set; then :
+if ${ac_cv_path_EGREP+:} false; then :
$as_echo_n "(cached) " >&6
else
if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
for ac_prog in egrep; do
for ac_exec_ext in '' $ac_executable_extensions; do
ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
- { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+ as_fn_executable_p "$ac_path_EGREP" || continue
# Check for GNU ac_path_EGREP and select it if it is found.
# Check for GNU $ac_path_EGREP
case `"$ac_path_EGREP" --version 2>&1` in
done
IFS=$as_save_IFS
if test -z "$ac_cv_path_EGREP"; then
- as_fn_error "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
fi
else
ac_cv_path_EGREP=$EGREP
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
$as_echo_n "checking for ANSI C header files... " >&6; }
-if test "${ac_cv_header_stdc+set}" = set; then :
+if ${ac_cv_header_stdc+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
ac_fn_cxx_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
"
-eval as_val=\$$as_ac_Header
- if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
cat >>confdefs.h <<_ACEOF
#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
_ACEOF
as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
ac_fn_cxx_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
"
-eval as_val=\$$as_ac_Header
- if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
cat >>confdefs.h <<_ACEOF
#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
_ACEOF
for ac_func in times
do :
ac_fn_cxx_check_func "$LINENO" "times" "ac_cv_func_times"
-if test "x$ac_cv_func_times" = x""yes; then :
+if test "x$ac_cv_func_times" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_TIMES 1
_ACEOF
if test "$cross_compiling" = yes; then :
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot run test program while cross compiling
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "cannot run test program while cross compiling
+See \`config.log' for more details" "$LINENO" 5; }
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
set dummy gfortran f77 g77; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_F77+set}" = set; then :
+if ${ac_cv_path_F77+:} false; then :
$as_echo_n "(cached) " >&6
else
case $F77 in
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_F77="$as_dir/$ac_word$ac_exec_ext"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy $F77; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_F77+set}" = set; then :
+if ${ac_cv_path_F77+:} false; then :
$as_echo_n "(cached) " >&6
else
case $F77 in
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_F77="$as_dir/$ac_word$ac_exec_ext"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for e_wsfe in -lg2c" >&5
$as_echo_n "checking for e_wsfe in -lg2c... " >&6; }
-if test "${ac_cv_lib_g2c_e_wsfe+set}" = set; then :
+if ${ac_cv_lib_g2c_e_wsfe+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_g2c_e_wsfe" >&5
$as_echo "$ac_cv_lib_g2c_e_wsfe" >&6; }
-if test "x$ac_cv_lib_g2c_e_wsfe" = x""yes; then :
+if test "x$ac_cv_lib_g2c_e_wsfe" = xyes; then :
F77LIBS="$F77LIBS -lg2c"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for _gfortran_allocate in -lgfortran" >&5
$as_echo_n "checking for _gfortran_allocate in -lgfortran... " >&6; }
-if test "${ac_cv_lib_gfortran__gfortran_allocate+set}" = set; then :
+if ${ac_cv_lib_gfortran__gfortran_allocate+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_gfortran__gfortran_allocate" >&5
$as_echo "$ac_cv_lib_gfortran__gfortran_allocate" >&6; }
-if test "x$ac_cv_lib_gfortran__gfortran_allocate" = x""yes; then :
+if test "x$ac_cv_lib_gfortran__gfortran_allocate" = xyes; then :
found=1
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for _gfortran_st_write_done in -lgfortran" >&5
$as_echo_n "checking for _gfortran_st_write_done in -lgfortran... " >&6; }
-if test "${ac_cv_lib_gfortran__gfortran_st_write_done+set}" = set; then :
+if ${ac_cv_lib_gfortran__gfortran_st_write_done+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_gfortran__gfortran_st_write_done" >&5
$as_echo "$ac_cv_lib_gfortran__gfortran_st_write_done" >&6; }
-if test "x$ac_cv_lib_gfortran__gfortran_st_write_done" = x""yes; then :
+if test "x$ac_cv_lib_gfortran__gfortran_st_write_done" = xyes; then :
found=1
fi
;;
*)
- as_fn_error "No compiler options for F77 compiler \"$F77_VERSION\" specified: modification of aclocal.m4 necessary" "$LINENO" 5
+ as_fn_error $? "No compiler options for F77 compiler \"$F77_VERSION\" specified: modification of aclocal.m4 necessary" "$LINENO" 5
;;
esac
set dummy ar; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AR+set}" = set; then :
+if ${ac_cv_prog_AR+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$AR"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_AR="ar"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy $AR; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_AR+set}" = set; then :
+if ${ac_cv_path_AR+:} false; then :
$as_echo_n "(cached) " >&6
else
case $AR in
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_AR="$as_dir/$ac_word$ac_exec_ext"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_RANLIB+set}" = set; then :
+if ${ac_cv_prog_RANLIB+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$RANLIB"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy ranlib; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then :
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_RANLIB"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_RANLIB="ranlib"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy $RANLIB; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_RANLIB+set}" = set; then :
+if ${ac_cv_path_RANLIB+:} false; then :
$as_echo_n "(cached) " >&6
else
case $RANLIB in
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_RANLIB="$as_dir/$ac_word$ac_exec_ext"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
$as_echo "Disabling backward compatibility feature: \"$i\"" >&6; }
;;
*)
- as_fn_error "Backward compatibility feature \"$i\" unknown" "$LINENO" 5
+ as_fn_error $? "Backward compatibility feature \"$i\" unknown" "$LINENO" 5
;;
esac
done
;;
*)
- as_fn_error "Backward compatibility feature \"$i\" unknown" "$LINENO" 5
+ as_fn_error $? "Backward compatibility feature \"$i\" unknown" "$LINENO" 5
;;
esac
done
LDFLAGS="$BOOST_LIB_DIR $LDFLAGS"
ac_fn_cxx_check_header_mongrel "$LINENO" "boost/shared_ptr.hpp" "ac_cv_header_boost_shared_ptr_hpp" "$ac_includes_default"
-if test "x$ac_cv_header_boost_shared_ptr_hpp" = x""yes; then :
+if test "x$ac_cv_header_boost_shared_ptr_hpp" = xyes; then :
else
- as_fn_error "Your boost installation is incomplete!" "$LINENO" 5
+ as_fn_error $? "Your boost installation is incomplete!" "$LINENO" 5
fi
ac_fn_cxx_check_header_mongrel "$LINENO" "boost/type_traits.hpp" "ac_cv_header_boost_type_traits_hpp" "$ac_includes_default"
-if test "x$ac_cv_header_boost_type_traits_hpp" = x""yes; then :
+if test "x$ac_cv_header_boost_type_traits_hpp" = xyes; then :
else
- as_fn_error "Your boost installation is incomplete!" "$LINENO" 5
+ as_fn_error $? "Your boost installation is incomplete!" "$LINENO" 5
fi
ac_fn_cxx_check_header_mongrel "$LINENO" "boost/tuple/tuple.hpp" "ac_cv_header_boost_tuple_tuple_hpp" "$ac_includes_default"
-if test "x$ac_cv_header_boost_tuple_tuple_hpp" = x""yes; then :
+if test "x$ac_cv_header_boost_tuple_tuple_hpp" = xyes; then :
else
- as_fn_error "Your boost installation is incomplete!" "$LINENO" 5
+ as_fn_error $? "Your boost installation is incomplete!" "$LINENO" 5
fi
if test ! -d $DEAL_II_PETSC_DIR/include \
; then
- as_fn_error "Path to PETSc specified with --with-petsc does not point to a complete PETSc installation" "$LINENO" 5
+ as_fn_error $? "Path to PETSc specified with --with-petsc does not point to a complete PETSc installation" "$LINENO" 5
fi
fi
if test ! -d $DEAL_II_PETSC_DIR/include \
; then
- as_fn_error "The path to PETSc specified in the PETSC_DIR environment variable does not point to a complete PETSc installation" "$LINENO" 5
+ as_fn_error $? "The path to PETSc specified in the PETSC_DIR environment variable does not point to a complete PETSc installation" "$LINENO" 5
fi
else
USE_CONTRIB_PETSC=no
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $DEAL_II_PETSC_ARCH" >&5
$as_echo "$DEAL_II_PETSC_ARCH" >&6; }
else
- as_fn_error "If PETSc is used, you must specify the architecture either through the PETSC_ARCH environment variable, or through the --with-petsc-arch flag" "$LINENO" 5
+ as_fn_error $? "If PETSc is used, you must specify the architecture either through the PETSC_ARCH environment variable, or through the --with-petsc-arch flag" "$LINENO" 5
fi
fi
case "${DEAL_II_PETSC_VERSION_MAJOR}.${DEAL_II_PETSC_VERSION_MINOR}.${DEAL_II_PETSC_VERSION_SUBMINOR}" in
3.*) if test ! -d $DEAL_II_PETSC_DIR/$DEAL_II_PETSC_ARCH/lib \
; then
- as_fn_error "PETSc has not been compiled for the architecture specified with --with-petsc-arch" "$LINENO" 5
+ as_fn_error $? "PETSc has not been compiled for the architecture specified with --with-petsc-arch" "$LINENO" 5
fi
;;
- *) as_fn_error "Unknown PETSc version ${DEAL_II_PETSC_VERSION_MAJOR}.${DEAL_II_PETSC_VERSION_MINOR}.${DEAL_II_PETSC_VERSION_SUBMINOR}" "$LINENO" 5
+ *) as_fn_error $? "Unknown PETSc version ${DEAL_II_PETSC_VERSION_MAJOR}.${DEAL_II_PETSC_VERSION_MINOR}.${DEAL_II_PETSC_VERSION_SUBMINOR}" "$LINENO" 5
;;
esac
fi
DEAL_II_PETSC_MPIUNI_LIB="$DEAL_II_PETSC_DIR/$DEAL_II_PETSC_ARCH/lib/libmpiuni.a"
fi
;;
- *) as_fn_error "Unknown PETSc version ${DEAL_II_PETSC_VERSION_MAJOR}.${DEAL_II_PETSC_VERSION_MINOR}.${DEAL_II_PETSC_VERSION_SUBMINOR}" "$LINENO" 5
+ *) as_fn_error $? "Unknown PETSc version ${DEAL_II_PETSC_VERSION_MAJOR}.${DEAL_II_PETSC_VERSION_MINOR}.${DEAL_II_PETSC_VERSION_SUBMINOR}" "$LINENO" 5
;;
esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
else
- as_fn_error "PETSc was not built for MPI, but deal.II is!
+ as_fn_error $? "PETSc was not built for MPI, but deal.II is!
" "$LINENO" 5
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
;;
- *) as_fn_error "Unknown PETSc version ${DEAL_II_PETSC_VERSION_MAJOR}.${DEAL_II_PETSC_VERSION_MINOR}.${DEAL_II_PETSC_VERSION_SUBMINOR}" "$LINENO" 5
+ *) as_fn_error $? "Unknown PETSc version ${DEAL_II_PETSC_VERSION_MAJOR}.${DEAL_II_PETSC_VERSION_MINOR}.${DEAL_II_PETSC_VERSION_SUBMINOR}" "$LINENO" 5
;;
esac
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
else
- as_fn_error "PETSc was built for MPI, but deal.II is not!" "$LINENO" 5
+ as_fn_error $? "PETSc was built for MPI, but deal.II is not!" "$LINENO" 5
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
;;
- *) as_fn_error "Unknown PETSc version ${DEAL_II_PETSC_VERSION_MAJOR}.${DEAL_II_PETSC_VERSION_MINOR}.${DEAL_II_PETSC_VERSION_SUBMINOR}" "$LINENO" 5
+ *) as_fn_error $? "Unknown PETSc version ${DEAL_II_PETSC_VERSION_MAJOR}.${DEAL_II_PETSC_VERSION_MINOR}.${DEAL_II_PETSC_VERSION_SUBMINOR}" "$LINENO" 5
;;
esac
fi
if test ! -d $DEAL_II_SLEPC_DIR \
-o ! -d $DEAL_II_SLEPC_DIR/include \
; then
- as_fn_error "Path to SLEPc specified with --with-slepc does not point to a complete SLEPc installation" "$LINENO" 5
+ as_fn_error $? "Path to SLEPc specified with --with-slepc does not point to a complete SLEPc installation" "$LINENO" 5
fi
if test ! -d $DEAL_II_SLEPC_DIR/$DEAL_II_PETSC_ARCH \
-o ! -d $DEAL_II_SLEPC_DIR/$DEAL_II_PETSC_ARCH/lib \
; then
- as_fn_error "SLEPc has not been compiled for the PETSc architecture" "$LINENO" 5
+ as_fn_error $? "SLEPc has not been compiled for the PETSc architecture" "$LINENO" 5
fi
fi
if test ! -d $DEAL_II_SLEPC_DIR \
-o ! -d $DEAL_II_SLEPC_DIR/include \
; then
- as_fn_error "The path to SLEPc specified in the SLEPC_DIR environment variable does not point to a complete SLEPc installation" "$LINENO" 5
+ as_fn_error $? "The path to SLEPc specified in the SLEPC_DIR environment variable does not point to a complete SLEPc installation" "$LINENO" 5
fi
else
USE_CONTRIB_SLEPC=no
if test "${PETSC_VERSION}" != "${SLEPC_VERSION}" \
-o "${PETSC_RELEASE}" != "${SLEPC_RELEASE}" \
; then
- as_fn_error "If SLEPc is used, you must use the same version number as your PETSc Installation" "$LINENO" 5
+ as_fn_error $? "If SLEPc is used, you must use the same version number as your PETSc Installation" "$LINENO" 5
fi
if test ! -d $DEAL_II_TRILINOS_DIR/include \
-o ! -d $DEAL_II_TRILINOS_DIR/lib ; then
- as_fn_error "Path to Trilinos specified with --with-trilinos does not point to a complete Trilinos installation" "$LINENO" 5
+ as_fn_error $? "Path to Trilinos specified with --with-trilinos does not point to a complete Trilinos installation" "$LINENO" 5
fi
DEAL_II_TRILINOS_INCDIR="$DEAL_II_TRILINOS_DIR/include"
if test ! -d $DEAL_II_TRILINOS_DIR/include \
-o ! -d $DEAL_II_TRILINOS_DIR/lib ; then
- as_fn_error "The path to Trilinos specified in the TRILINOS_DIR environment variable does not point to a complete Trilinos installation" "$LINENO" 5
+ as_fn_error $? "The path to Trilinos specified in the TRILINOS_DIR environment variable does not point to a complete Trilinos installation" "$LINENO" 5
fi
DEAL_II_TRILINOS_INCDIR="$DEAL_II_TRILINOS_DIR/include"
DEAL_II_TRILINOS_LIBDIR="$DEAL_II_TRILINOS_DIR/lib"
$as_echo "$DEAL_II_TRILINOS_INCDIR" >&6; }
if test ! -d $DEAL_II_TRILINOS_INCDIR ; then
- as_fn_error "Path to Trilinos specified with --with-trilinos-include does not point to a complete Trilinos installation" "$LINENO" 5
+ as_fn_error $? "Path to Trilinos specified with --with-trilinos-include does not point to a complete Trilinos installation" "$LINENO" 5
fi
fi
$as_echo "$DEAL_II_TRILINOS_INCDIR" >&6; }
if test ! -d $DEAL_II_TRILINOS_INCDIR ; then
- as_fn_error "The path to Trilinos includes specified in the TRILINOS_INCDIR environment variable does not point to a valid directory" "$LINENO" 5
+ as_fn_error $? "The path to Trilinos includes specified in the TRILINOS_INCDIR environment variable does not point to a valid directory" "$LINENO" 5
fi
else
if test "x${USE_CONTRIB_TRILINOS}" != "xyes" ; then
$as_echo "$DEAL_II_TRILINOS_LIBDIR" >&6; }
if test ! -d $DEAL_II_TRILINOS_LIBDIR ; then
- as_fn_error "Path to Trilinos libraries with --with-trilinos-libs does not point to a valid directory" "$LINENO" 5
+ as_fn_error $? "Path to Trilinos libraries with --with-trilinos-libs does not point to a valid directory" "$LINENO" 5
fi
fi
$as_echo "$DEAL_II_TRILINOS_LIBDIR" >&6; }
if test ! -d $DEAL_II_TRILINOS_LIBDIR ; then
- as_fn_error "The path to Trilinos specified in the TRILINOS_LIBDIR environment variable does not point to a complete Trilinos installation" "$LINENO" 5
+ as_fn_error $? "The path to Trilinos specified in the TRILINOS_LIBDIR environment variable does not point to a complete Trilinos installation" "$LINENO" 5
fi
else
if test "x${USE_CONTRIB_TRILINOS}" != "xyes" ; then
$as_echo "$DEAL_II_TRILINOS_VERSION_MAJOR.$DEAL_II_TRILINOS_VERSION_MINOR.$DEAL_II_TRILINOS_VERSION_SUBMINOR" >&6; }
if test "$DEAL_II_TRILINOS_VERSION_MAJOR" -lt 10 ; then
- as_fn_error "Trilinos versions prior to 10.0 are no longer supported with deal.II." "$LINENO" 5
+ as_fn_error $? "Trilinos versions prior to 10.0 are no longer supported with deal.II." "$LINENO" 5
fi
if test "$DEAL_II_TRILINOS_VERSION_MAJOR" = 10 -a "$DEAL_II_TRILINOS_VERSION_MINOR" = 6 ; then
- as_fn_error "Trilinos versions 10.6.x have bugs that make it incompatible
+ as_fn_error $? "Trilinos versions 10.6.x have bugs that make it incompatible
with deal.II. Please use versions before 10.6 or after 10.8.1." "$LINENO" 5
fi
if test "$DEAL_II_TRILINOS_VERSION_MAJOR" = 10 \
-a "$DEAL_II_TRILINOS_VERSION_MINOR" = 8 \
-a "$DEAL_II_TRILINOS_VERSION_SUBMINOR" -lt 2 ; then
- as_fn_error "Trilinos versions 10.8.0 and 10.8.1 have bugs that make it incompatible
+ as_fn_error $? "Trilinos versions 10.8.0 and 10.8.1 have bugs that make it incompatible
with deal.II. Please use versions before 10.6 or after 10.8.1." "$LINENO" 5
fi
else
- as_fn_error "Trilinos was not built for MPI, but deal.II is!" "$LINENO" 5
+ as_fn_error $? "Trilinos was not built for MPI, but deal.II is!" "$LINENO" 5
exit 1;
fi
else
- as_fn_error "Trilinos was built for MPI, but deal.II is not!" "$LINENO" 5
+ as_fn_error $? "Trilinos was built for MPI, but deal.II is not!" "$LINENO" 5
exit 1;
fi
fi
if test "x${DEAL_II_TRILINOS_SHARED}${DEAL_II_TRILINOS_STATIC}" = "x" ; then
- as_fn_error "Unable to determine whether Trilinos uses shared or static libraries." "$LINENO" 5
+ as_fn_error $? "Unable to determine whether Trilinos uses shared or static libraries." "$LINENO" 5
fi
if test "x$enableshared" = "xyes" -a "x$DEAL_II_TRILINOS_SHARED" != "xyes" ; then
- as_fn_error "When building deal.II with shared libraries, Trilinos also needs to be built with shared libraries" "$LINENO" 5
+ as_fn_error $? "When building deal.II with shared libraries, Trilinos also needs to be built with shared libraries" "$LINENO" 5
fi
if test "x$enableshared" = "xno" -a "x$DEAL_II_TRILINOS_STATIC" != "xyes" ; then
- as_fn_error "When building deal.II with static libraries, Trilinos also needs to be built with static libraries" "$LINENO" 5
+ as_fn_error $? "When building deal.II with static libraries, Trilinos also needs to be built with static libraries" "$LINENO" 5
fi
if test "x$enableshared" = "xyes" ; then
$DEAL_II_TRILINOS_VERSION_MINOR -lt 4 ; then
:
else
- as_fn_error "package file TrilinosConfig.cmake not found" "$LINENO" 5
+ as_fn_error $? "package file TrilinosConfig.cmake not found" "$LINENO" 5
fi
DEAL_II_TRILINOS_LIBS="stratimikosamesos stratimikosaztecoo stratimikosifpack stratimikosml stratimikos ml amesos belos ifpack aztecoo rtop sacado thyra thyraepetra thyraepetraext epetraext epetra teuchos triutils"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
- as_fn_error "*** Your Trilinos installation is not compatible with the C++ standard selected for this compiler. See the deal.II FAQ page for a solution. ***" "$LINENO" 5
+ as_fn_error $? "*** Your Trilinos installation is not compatible with the C++ standard selected for this compiler. See the deal.II FAQ page for a solution. ***" "$LINENO" 5
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
else
- as_fn_error "File $DEAL_II_TRILINOS_INCDIR/Sacado_cmath.hpp not found." "$LINENO" 5
+ as_fn_error $? "File $DEAL_II_TRILINOS_INCDIR/Sacado_cmath.hpp not found." "$LINENO" 5
fi
for ac_header in Amesos.h \
do :
as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
ac_fn_cxx_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
-eval as_val=\$$as_ac_Header
- if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
cat >>confdefs.h <<_ACEOF
#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
_ACEOF
else
- as_fn_error "The Trilinos installation is missing one or more header files necessary for the deal.II Trilinos interfaces. Please re-install Trilinos with the missing Trilinos sub-packages enabled." "$LINENO" 5
+ as_fn_error $? "The Trilinos installation is missing one or more header files necessary for the deal.II Trilinos interfaces. Please re-install Trilinos with the missing Trilinos sub-packages enabled." "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
$as_echo_n "checking for a sed that does not truncate output... " >&6; }
-if test "${ac_cv_path_SED+set}" = set; then :
+if ${ac_cv_path_SED+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
for ac_prog in sed gsed; do
for ac_exec_ext in '' $ac_executable_extensions; do
ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
- { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
+ as_fn_executable_p "$ac_path_SED" || continue
# Check for GNU ac_path_SED and select it if it is found.
# Check for GNU $ac_path_SED
case `"$ac_path_SED" --version 2>&1` in
done
IFS=$as_save_IFS
if test -z "$ac_cv_path_SED"; then
- as_fn_error "no acceptable sed could be found in \$PATH" "$LINENO" 5
+ as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
fi
else
ac_cv_path_SED=$SED
set dummy $ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AWK+set}" = set; then :
+if ${ac_cv_prog_AWK+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$AWK"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_AWK="$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy $ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_H5CC+set}" = set; then :
+if ${ac_cv_path_H5CC+:} false; then :
$as_echo_n "(cached) " >&6
else
case $H5CC in
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_H5CC="$as_dir/$ac_word$ac_exec_ext"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
LDFLAGS=$DEAL_II_HDF5_LDFLAGS
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lhdf5_hl" >&5
$as_echo_n "checking for main in -lhdf5_hl... " >&6; }
-if test "${ac_cv_lib_hdf5_hl_main+set}" = set; then :
+if ${ac_cv_lib_hdf5_hl_main+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_hdf5_hl_main" >&5
$as_echo "$ac_cv_lib_hdf5_hl_main" >&6; }
-if test "x$ac_cv_lib_hdf5_hl_main" = x""yes; then :
+if test "x$ac_cv_lib_hdf5_hl_main" = xyes; then :
DEAL_II_HDF5_LDFLAGS="$DEAL_II_HDF5_LDFLAGS -lhdf5_hl"
fi
ac_cv_lib_hdf5_hl=ac_cv_lib_hdf5_hl_main
$as_echo "$DEAL_II_ARPACK_DIR" >&6; }
if test ! -d $DEAL_II_ARPACK_DIR \
; then
- as_fn_error "Path to ARPACK specified with --with-arpack does not point to a complete ARPACK installation" "$LINENO" 5
+ as_fn_error $? "Path to ARPACK specified with --with-arpack does not point to a complete ARPACK installation" "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ARPACK library architecture" >&5
-o ! -d $DEAL_II_MUMPS_DIR/include \
-o ! -d $DEAL_II_MUMPS_DIR/lib \
; then
- as_fn_error "Path to MUMPS specified with --with-mumps does not point to a complete MUMPS installation" "$LINENO" 5
+ as_fn_error $? "Path to MUMPS specified with --with-mumps does not point to a complete MUMPS installation" "$LINENO" 5
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $DEAL_II_SCALAPACK_DIR" >&5
$as_echo "$DEAL_II_SCALAPACK_DIR" >&6; }
if test ! -d $DEAL_II_SCALAPCK_DIR ; then
- as_fn_error "The path to SCALAPACK specified with --with-scalapack does t point to a complete SCALAPACK installation" "$LINENO" 5
+ as_fn_error $? "The path to SCALAPACK specified with --with-scalapack does t point to a complete SCALAPACK installation" "$LINENO" 5
fi
else
- as_fn_error "If MUMPS is used, the path to SCALAPACK must be specified with --with-scalapack" "$LINENO" 5
+ as_fn_error $? "If MUMPS is used, the path to SCALAPACK must be specified with --with-scalapack" "$LINENO" 5
fi
$as_echo "$DEAL_II_BLACS_DIR" >&6; }
if test ! -d $DEAL_II_BLACS_DIR \
-o ! -d $DEAL_II_BLACS_DIR/LIB ; then
- as_fn_error "The path to BLACS specified with --with-blacs does not point to a complete BLACS installation" "$LINENO" 5
+ as_fn_error $? "The path to BLACS specified with --with-blacs does not point to a complete BLACS installation" "$LINENO" 5
fi
else
- as_fn_error "If MUMPS is used, the path to BLACS must be specified with --with-blacs" "$LINENO" 5
+ as_fn_error $? "If MUMPS is used, the path to BLACS must be specified with --with-blacs" "$LINENO" 5
fi
$as_echo "yes" >&6; }
if test ! -d "${use_p4est}/DEBUG" -o ! -d "${use_p4est}/FAST" ; then
- as_fn_error "p4est directories $use_p4est/DEBUG or $use_p4est/FAST not found" "$LINENO" 5
+ as_fn_error $? "p4est directories $use_p4est/DEBUG or $use_p4est/FAST not found" "$LINENO" 5
fi
if test "x${DEAL_II_COMPILER_SUPPORTS_MPI}" != "x1" ; then
- as_fn_error "When using p4est you also need to enable MPI." "$LINENO" 5
+ as_fn_error $? "When using p4est you also need to enable MPI." "$LINENO" 5
fi
if test "x$enableshared" != "xyes" ; then
- as_fn_error "When using p4est with shared libraries, you need to build
+ as_fn_error $? "When using p4est with shared libraries, you need to build
deal.II with shared libraries as well." "$LINENO" 5
fi
$as_echo "lib" >&6; }
DEAL_II_P4EST_LIBDIR_NAME=lib
else
- as_fn_error "could not determine whether p4est stores its library in lib/ or lib64/ directories" "$LINENO" 5
+ as_fn_error $? "could not determine whether p4est stores its library in lib/ or lib64/ directories" "$LINENO" 5
fi
fi
as_ac_Lib=`$as_echo "ac_cv_lib_$blas''_daxpy_" | $as_tr_sh`
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for daxpy_ in -l$blas" >&5
$as_echo_n "checking for daxpy_ in -l$blas... " >&6; }
-if { as_var=$as_ac_Lib; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval \${$as_ac_Lib+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
eval ac_res=\$$as_ac_Lib
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
-eval as_val=\$$as_ac_Lib
- if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_Lib"\" = x"yes"; then :
LIBS="-l$blas $LIBS"
as_ac_Lib=`$as_echo "ac_cv_lib_$blas''_daxpy_" | $as_tr_sh`
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for daxpy_ in -l$blas" >&5
$as_echo_n "checking for daxpy_ in -l$blas... " >&6; }
-if { as_var=$as_ac_Lib; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval \${$as_ac_Lib+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
eval ac_res=\$$as_ac_Lib
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
-eval as_val=\$$as_ac_Lib
- if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_Lib"\" = x"yes"; then :
LIBS="-l$blas $LIBS"
as_ac_Lib=`$as_echo "ac_cv_lib_$zlib''_crc32" | $as_tr_sh`
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for crc32 in -l$zlib" >&5
$as_echo_n "checking for crc32 in -l$zlib... " >&6; }
-if { as_var=$as_ac_Lib; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval \${$as_ac_Lib+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
eval ac_res=\$$as_ac_Lib
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
-eval as_val=\$$as_ac_Lib
- if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_Lib"\" = x"yes"; then :
ac_fn_cxx_check_header_mongrel "$LINENO" "zlib.h" "ac_cv_header_zlib_h" "$ac_includes_default"
-if test "x$ac_cv_header_zlib_h" = x""yes; then :
+if test "x$ac_cv_header_zlib_h" = xyes; then :
LIBS="-l$zlib $LIBS"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether byte ordering is bigendian" >&5
$as_echo_n "checking whether byte ordering is bigendian... " >&6; }
-if test "${ac_cv_c_bigendian+set}" = set; then :
+if ${ac_cv_c_bigendian+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_cv_c_bigendian=unknown
;; #(
*)
- as_fn_error "unknown endianness
+ as_fn_error $? "unknown endianness
presetting ac_cv_c_bigendian=no (or yes) will help" "$LINENO" 5 ;;
esac
as_ac_File=`$as_echo "ac_cv_file_$i/lib/tecio.a" | $as_tr_sh`
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $i/lib/tecio.a" >&5
$as_echo_n "checking for $i/lib/tecio.a... " >&6; }
-if { as_var=$as_ac_File; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval \${$as_ac_File+:} false; then :
$as_echo_n "(cached) " >&6
else
test "$cross_compiling" = yes &&
- as_fn_error "cannot check for file existence when cross compiling" "$LINENO" 5
+ as_fn_error $? "cannot check for file existence when cross compiling" "$LINENO" 5
if test -r "$i/lib/tecio.a"; then
eval "$as_ac_File=yes"
else
eval ac_res=\$$as_ac_File
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
-eval as_val=\$$as_ac_File
- if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_File"\" = x"yes"; then :
TECPLOT_LIB="$i/lib/tecio.a"
fi
as_ac_File=`$as_echo "ac_cv_file_$i/include/TECIO.h" | $as_tr_sh`
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $i/include/TECIO.h" >&5
$as_echo_n "checking for $i/include/TECIO.h... " >&6; }
-if { as_var=$as_ac_File; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval \${$as_ac_File+:} false; then :
$as_echo_n "(cached) " >&6
else
test "$cross_compiling" = yes &&
- as_fn_error "cannot check for file existence when cross compiling" "$LINENO" 5
+ as_fn_error $? "cannot check for file existence when cross compiling" "$LINENO" 5
if test -r "$i/include/TECIO.h"; then
eval "$as_ac_File=yes"
else
eval ac_res=\$$as_ac_File
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
-eval as_val=\$$as_ac_File
- if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_File"\" = x"yes"; then :
TECPLOT_INCLUDE_DIR=-I$i/include
else
TECPLOT_LIB=""
fi
ac_fn_cxx_check_header_mongrel "$LINENO" "netcdfcpp.h" "ac_cv_header_netcdfcpp_h" "$ac_includes_default"
-if test "x$ac_cv_header_netcdfcpp_h" = x""yes; then :
+if test "x$ac_cv_header_netcdfcpp_h" = xyes; then :
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for nc_open in -lnetcdf" >&5
$as_echo_n "checking for nc_open in -lnetcdf... " >&6; }
-if test "${ac_cv_lib_netcdf_nc_open+set}" = set; then :
+if ${ac_cv_lib_netcdf_nc_open+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_netcdf_nc_open" >&5
$as_echo "$ac_cv_lib_netcdf_nc_open" >&6; }
-if test "x$ac_cv_lib_netcdf_nc_open" = x""yes; then :
+if test "x$ac_cv_lib_netcdf_nc_open" = xyes; then :
OLD_LIBS="$LIBS"
if test ! -d $DEAL_II_METIS_DIR/lib \
&& test ! -d $DEAL_II_METIS_DIR/libmetis ; then
- as_fn_error "Path to Metis specified with --with-metis does not point to a complete Metis installation" "$LINENO" 5
+ as_fn_error $? "Path to Metis specified with --with-metis does not point to a complete Metis installation" "$LINENO" 5
fi
if test -d $DEAL_II_METIS_DIR/lib ; then
fi
if test ! -d $DEAL_II_METIS_DIR/include ; then
- as_fn_error "Path to Metis specified with --with-metis does not point to a complete Metis installation" "$LINENO" 5
+ as_fn_error $? "Path to Metis specified with --with-metis does not point to a complete Metis installation" "$LINENO" 5
fi
DEAL_II_METIS_INCDIR="$DEAL_II_METIS_DIR/include"
if test ! -d $DEAL_II_METIS_DIR/lib \
&& test ! -d $DEAL_II_METIS_DIR/libmetis ; then
- as_fn_error "The path to Metis specified in the METIS_DIR environment variable does not point to a complete Metis installation" "$LINENO" 5
+ as_fn_error $? "The path to Metis specified in the METIS_DIR environment variable does not point to a complete Metis installation" "$LINENO" 5
fi
if test -d $DEAL_II_METIS_DIR/lib ; then
LDFLAGS="-L${UMFPACK_DIR}/UMFPACK $LDFLAGS"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for umfpack_di_defaults in -lumfpack" >&5
$as_echo_n "checking for umfpack_di_defaults in -lumfpack... " >&6; }
-if test "${ac_cv_lib_umfpack_umfpack_di_defaults+set}" = set; then :
+if ${ac_cv_lib_umfpack_umfpack_di_defaults+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_umfpack_umfpack_di_defaults" >&5
$as_echo "$ac_cv_lib_umfpack_umfpack_di_defaults" >&6; }
-if test "x$ac_cv_lib_umfpack_umfpack_di_defaults" = x""yes; then :
+if test "x$ac_cv_lib_umfpack_umfpack_di_defaults" = xyes; then :
LIBS="$LIBS -lumfpack"
LDFLAGS="-L${UMFPACK_DIR}/lib $OLD_LDFLAGS"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for umfpack_di_defaults in -lumfpack" >&5
$as_echo_n "checking for umfpack_di_defaults in -lumfpack... " >&6; }
-if test "${ac_cv_lib_umfpack_umfpack_di_defaults+set}" = set; then :
+if ${ac_cv_lib_umfpack_umfpack_di_defaults+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_umfpack_umfpack_di_defaults" >&5
$as_echo "$ac_cv_lib_umfpack_umfpack_di_defaults" >&6; }
-if test "x$ac_cv_lib_umfpack_umfpack_di_defaults" = x""yes; then :
+if test "x$ac_cv_lib_umfpack_umfpack_di_defaults" = xyes; then :
LIBS="$LIBS -lumfpack"
else
- as_fn_error "installation of UMFPACK could not be determined" "$LINENO" 5
+ as_fn_error $? "installation of UMFPACK could not be determined" "$LINENO" 5
fi
LDFLAGS="-L${UMFPACK_DIR}/AMD/Lib $LDFLAGS"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for amd_info in -lamd" >&5
$as_echo_n "checking for amd_info in -lamd... " >&6; }
-if test "${ac_cv_lib_amd_amd_info+set}" = set; then :
+if ${ac_cv_lib_amd_amd_info+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_amd_amd_info" >&5
$as_echo "$ac_cv_lib_amd_amd_info" >&6; }
-if test "x$ac_cv_lib_amd_amd_info" = x""yes; then :
+if test "x$ac_cv_lib_amd_amd_info" = xyes; then :
LIBS="$LIBS -lamd"
LDFLAGS="-L${UMFPACK_DIR}/lib $OLD_LDFLAGS"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for amd_info in -lamd" >&5
$as_echo_n "checking for amd_info in -lamd... " >&6; }
-if test "${ac_cv_lib_amd_amd_info+set}" = set; then :
+if ${ac_cv_lib_amd_amd_info+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_amd_amd_info" >&5
$as_echo "$ac_cv_lib_amd_amd_info" >&6; }
-if test "x$ac_cv_lib_amd_amd_info" = x""yes; then :
+if test "x$ac_cv_lib_amd_amd_info" = xyes; then :
LIBS="$LIBS -lamd"
else
- as_fn_error "installation of AMD could not be determined" "$LINENO" 5
+ as_fn_error $? "installation of AMD could not be determined" "$LINENO" 5
fi
as_ac_File=`$as_echo "ac_cv_file_${UMFPACK_DIR}/UMFPACK/Include/umfpack.h" | $as_tr_sh`
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${UMFPACK_DIR}/UMFPACK/Include/umfpack.h" >&5
$as_echo_n "checking for ${UMFPACK_DIR}/UMFPACK/Include/umfpack.h... " >&6; }
-if { as_var=$as_ac_File; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval \${$as_ac_File+:} false; then :
$as_echo_n "(cached) " >&6
else
test "$cross_compiling" = yes &&
- as_fn_error "cannot check for file existence when cross compiling" "$LINENO" 5
+ as_fn_error $? "cannot check for file existence when cross compiling" "$LINENO" 5
if test -r "${UMFPACK_DIR}/UMFPACK/Include/umfpack.h"; then
eval "$as_ac_File=yes"
else
eval ac_res=\$$as_ac_File
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
-eval as_val=\$$as_ac_File
- if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_File"\" = x"yes"; then :
UMFPACK_INCLUDE_DIR=-I${UMFPACK_DIR}/UMFPACK/Include
as_ac_File=`$as_echo "ac_cv_file_${UMFPACK_DIR}/include/suitesparse/umfpack.h" | $as_tr_sh`
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${UMFPACK_DIR}/include/suitesparse/umfpack.h" >&5
$as_echo_n "checking for ${UMFPACK_DIR}/include/suitesparse/umfpack.h... " >&6; }
-if { as_var=$as_ac_File; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval \${$as_ac_File+:} false; then :
$as_echo_n "(cached) " >&6
else
test "$cross_compiling" = yes &&
- as_fn_error "cannot check for file existence when cross compiling" "$LINENO" 5
+ as_fn_error $? "cannot check for file existence when cross compiling" "$LINENO" 5
if test -r "${UMFPACK_DIR}/include/suitesparse/umfpack.h"; then
eval "$as_ac_File=yes"
else
eval ac_res=\$$as_ac_File
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
-eval as_val=\$$as_ac_File
- if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_File"\" = x"yes"; then :
UMFPACK_INCLUDE_DIR=-I${UMFPACK_DIR}/include/suitesparse
else
- as_fn_error "installation of UMFPACK could not be determined" "$LINENO" 5
+ as_fn_error $? "installation of UMFPACK could not be determined" "$LINENO" 5
fi
as_ac_File=`$as_echo "ac_cv_file_${UMFPACK_DIR}/AMD/Include/amd.h" | $as_tr_sh`
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${UMFPACK_DIR}/AMD/Include/amd.h" >&5
$as_echo_n "checking for ${UMFPACK_DIR}/AMD/Include/amd.h... " >&6; }
-if { as_var=$as_ac_File; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval \${$as_ac_File+:} false; then :
$as_echo_n "(cached) " >&6
else
test "$cross_compiling" = yes &&
- as_fn_error "cannot check for file existence when cross compiling" "$LINENO" 5
+ as_fn_error $? "cannot check for file existence when cross compiling" "$LINENO" 5
if test -r "${UMFPACK_DIR}/AMD/Include/amd.h"; then
eval "$as_ac_File=yes"
else
eval ac_res=\$$as_ac_File
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
-eval as_val=\$$as_ac_File
- if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_File"\" = x"yes"; then :
UMFPACK_INCLUDE_DIR="${UMFPACK_INCLUDE_DIR} -I${UMFPACK_DIR}/AMD/Include"
as_ac_File=`$as_echo "ac_cv_file_${UMFPACK_DIR}/include/suitesparse/umfpack.h" | $as_tr_sh`
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${UMFPACK_DIR}/include/suitesparse/umfpack.h" >&5
$as_echo_n "checking for ${UMFPACK_DIR}/include/suitesparse/umfpack.h... " >&6; }
-if { as_var=$as_ac_File; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval \${$as_ac_File+:} false; then :
$as_echo_n "(cached) " >&6
else
test "$cross_compiling" = yes &&
- as_fn_error "cannot check for file existence when cross compiling" "$LINENO" 5
+ as_fn_error $? "cannot check for file existence when cross compiling" "$LINENO" 5
if test -r "${UMFPACK_DIR}/include/suitesparse/umfpack.h"; then
eval "$as_ac_File=yes"
else
eval ac_res=\$$as_ac_File
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
-eval as_val=\$$as_ac_File
- if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_File"\" = x"yes"; then :
UMFPACK_INCLUDE_DIR="${UMFPACK_INCLUDE_DIR} -I${UMFPACK_DIR}/include/suitesparse"
else
- as_fn_error "installation of UMFPACK could not be determined" "$LINENO" 5
+ as_fn_error $? "installation of UMFPACK could not be determined" "$LINENO" 5
fi
as_ac_File=`$as_echo "ac_cv_file_${UMFPACK_DIR}/UFconfig/UFconfig.h" | $as_tr_sh`
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${UMFPACK_DIR}/UFconfig/UFconfig.h" >&5
$as_echo_n "checking for ${UMFPACK_DIR}/UFconfig/UFconfig.h... " >&6; }
-if { as_var=$as_ac_File; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval \${$as_ac_File+:} false; then :
$as_echo_n "(cached) " >&6
else
test "$cross_compiling" = yes &&
- as_fn_error "cannot check for file existence when cross compiling" "$LINENO" 5
+ as_fn_error $? "cannot check for file existence when cross compiling" "$LINENO" 5
if test -r "${UMFPACK_DIR}/UFconfig/UFconfig.h"; then
eval "$as_ac_File=yes"
else
eval ac_res=\$$as_ac_File
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
-eval as_val=\$$as_ac_File
- if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_File"\" = x"yes"; then :
UMFPACK_INCLUDE_DIR="${UMFPACK_INCLUDE_DIR} -I${UMFPACK_DIR}/UFconfig"
else
- as_fn_error "not found" "$LINENO" 5
+ as_fn_error $? "not found" "$LINENO" 5
fi
CXXFLAGS="-I$UMFPACK_INCDIR $CXXFLAGS"
CPPFLAGS="-I$UMFPACK_INCDIR $CPPFLAGS"
ac_fn_cxx_check_header_mongrel "$LINENO" "umfpack.h" "ac_cv_header_umfpack_h" "$ac_includes_default"
-if test "x$ac_cv_header_umfpack_h" = x""yes; then :
+if test "x$ac_cv_header_umfpack_h" = xyes; then :
else
- as_fn_error "installation of UMFPACK could not be determined" "$LINENO" 5
+ as_fn_error $? "installation of UMFPACK could not be determined" "$LINENO" 5
fi
ac_fn_cxx_check_header_mongrel "$LINENO" "amd.h" "ac_cv_header_amd_h" "$ac_includes_default"
-if test "x$ac_cv_header_amd_h" = x""yes; then :
+if test "x$ac_cv_header_amd_h" = xyes; then :
else
- as_fn_error "installation of UMFPACK could not be determined" "$LINENO" 5
+ as_fn_error $? "installation of UMFPACK could not be determined" "$LINENO" 5
fi
ac_fn_cxx_check_header_mongrel "$LINENO" "UFconfig.h" "ac_cv_header_UFconfig_h" "$ac_includes_default"
-if test "x$ac_cv_header_UFconfig_h" = x""yes; then :
+if test "x$ac_cv_header_UFconfig_h" = xyes; then :
else
- as_fn_error "installation of UMFPACK could not be determined" "$LINENO" 5
+ as_fn_error $? "installation of UMFPACK could not be determined" "$LINENO" 5
fi
if test "x$UMFPACK_LIBDIR" != "x" ; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for amd_info in -lamd" >&5
$as_echo_n "checking for amd_info in -lamd... " >&6; }
-if test "${ac_cv_lib_amd_amd_info+set}" = set; then :
+if ${ac_cv_lib_amd_amd_info+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_amd_amd_info" >&5
$as_echo "$ac_cv_lib_amd_amd_info" >&6; }
-if test "x$ac_cv_lib_amd_amd_info" = x""yes; then :
+if test "x$ac_cv_lib_amd_amd_info" = xyes; then :
LIBS="$LIBS -lamd"
fi
else
- as_fn_error "installation of AMD could not be determined" "$LINENO" 5
+ as_fn_error $? "installation of AMD could not be determined" "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for umfpack_di_defaults in -lumfpack" >&5
$as_echo_n "checking for umfpack_di_defaults in -lumfpack... " >&6; }
-if test "${ac_cv_lib_umfpack_umfpack_di_defaults+set}" = set; then :
+if ${ac_cv_lib_umfpack_umfpack_di_defaults+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_umfpack_umfpack_di_defaults" >&5
$as_echo "$ac_cv_lib_umfpack_umfpack_di_defaults" >&6; }
-if test "x$ac_cv_lib_umfpack_umfpack_di_defaults" = x""yes; then :
+if test "x$ac_cv_lib_umfpack_umfpack_di_defaults" = xyes; then :
LIBS="$LIBS -lumfpack"
fi
else
- as_fn_error "installation of UMFPACK could not be determined" "$LINENO" 5
+ as_fn_error $? "installation of UMFPACK could not be determined" "$LINENO" 5
fi
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for amd_info in -lamd" >&5
$as_echo_n "checking for amd_info in -lamd... " >&6; }
-if test "${ac_cv_lib_amd_amd_info+set}" = set; then :
+if ${ac_cv_lib_amd_amd_info+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_amd_amd_info" >&5
$as_echo "$ac_cv_lib_amd_amd_info" >&6; }
-if test "x$ac_cv_lib_amd_amd_info" = x""yes; then :
+if test "x$ac_cv_lib_amd_amd_info" = xyes; then :
LIBS="$LIBS -lamd"
else
- as_fn_error "installation of AMD could not be determined" "$LINENO" 5
+ as_fn_error $? "installation of AMD could not be determined" "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for umfpack_di_defaults in -lumfpack" >&5
$as_echo_n "checking for umfpack_di_defaults in -lumfpack... " >&6; }
-if test "${ac_cv_lib_umfpack_umfpack_di_defaults+set}" = set; then :
+if ${ac_cv_lib_umfpack_umfpack_di_defaults+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_umfpack_umfpack_di_defaults" >&5
$as_echo "$ac_cv_lib_umfpack_umfpack_di_defaults" >&6; }
-if test "x$ac_cv_lib_umfpack_umfpack_di_defaults" = x""yes; then :
+if test "x$ac_cv_lib_umfpack_umfpack_di_defaults" = xyes; then :
LIBS="$LIBS -lumfpack"
else
- as_fn_error "installation of UMFPACK could not be determined" "$LINENO" 5
+ as_fn_error $? "installation of UMFPACK could not be determined" "$LINENO" 5
fi
as_ac_Lib=`$as_echo "ac_cv_lib_$lapack''_dgbsv_" | $as_tr_sh`
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dgbsv_ in -l$lapack" >&5
$as_echo_n "checking for dgbsv_ in -l$lapack... " >&6; }
-if { as_var=$as_ac_Lib; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval \${$as_ac_Lib+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
eval ac_res=\$$as_ac_Lib
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
-eval as_val=\$$as_ac_Lib
- if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_Lib"\" = x"yes"; then :
LIBS="-l$lapack $LIBS"
USE_CONTRIB_LAPACK='yes'
else
- as_fn_error "LAPACK library $lapack not found" "$LINENO" 5
+ as_fn_error $? "LAPACK library $lapack not found" "$LINENO" 5
fi
if test "x$with_blas" != "x" -a "x$with_blas" != "xno" ; then
ac_fn_cxx_check_func "$LINENO" "daxpy_" "ac_cv_func_daxpy_"
-if test "x$ac_cv_func_daxpy_" = x""yes; then :
+if test "x$ac_cv_func_daxpy_" = xyes; then :
else
- as_fn_error "BLAS library not installed correctly($with_blas)" "$LINENO" 5
+ as_fn_error $? "BLAS library not installed correctly($with_blas)" "$LINENO" 5
fi
fi
do :
as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
ac_fn_cxx_check_func "$LINENO" "$ac_func" "$as_ac_var"
-eval as_val=\$$as_ac_var
- if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
cat >>confdefs.h <<_ACEOF
#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
_ACEOF
do :
as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
ac_fn_cxx_check_func "$LINENO" "$ac_func" "$as_ac_var"
-eval as_val=\$$as_ac_var
- if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
cat >>confdefs.h <<_ACEOF
#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
_ACEOF
do :
as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
ac_fn_cxx_check_func "$LINENO" "$ac_func" "$as_ac_var"
-eval as_val=\$$as_ac_var
- if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
cat >>confdefs.h <<_ACEOF
#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
_ACEOF
do :
as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
ac_fn_cxx_check_func "$LINENO" "$ac_func" "$as_ac_var"
-eval as_val=\$$as_ac_var
- if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
cat >>confdefs.h <<_ACEOF
#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
_ACEOF
do :
as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
ac_fn_cxx_check_func "$LINENO" "$ac_func" "$as_ac_var"
-eval as_val=\$$as_ac_var
- if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
cat >>confdefs.h <<_ACEOF
#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
_ACEOF
do :
as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
ac_fn_cxx_check_func "$LINENO" "$ac_func" "$as_ac_var"
-eval as_val=\$$as_ac_var
- if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
cat >>confdefs.h <<_ACEOF
#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
_ACEOF
for ac_func in jn
do :
ac_fn_cxx_check_func "$LINENO" "jn" "ac_cv_func_jn"
-if test "x$ac_cv_func_jn" = x""yes; then :
+if test "x$ac_cv_func_jn" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_JN 1
_ACEOF
else
- as_fn_error "invalid combination of flags!" "$LINENO" 5
+ as_fn_error $? "invalid combination of flags!" "$LINENO" 5
exit 1;
fi
else
- as_fn_error "invalid combination of flags!" "$LINENO" 5
+ as_fn_error $? "invalid combination of flags!" "$LINENO" 5
exit 1;
fi
if test "$cross_compiling" = yes; then :
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot run test program while cross compiling
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "cannot run test program while cross compiling
+See \`config.log' for more details" "$LINENO" 5; }
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
if test "$cross_compiling" = yes; then :
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot run test program while cross compiling
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "cannot run test program while cross compiling
+See \`config.log' for more details" "$LINENO" 5; }
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
$as_echo "not found" >&6; }
- as_fn_error "Invalid doxygen path $DOXYGEN" "$LINENO" 5
+ as_fn_error $? "Invalid doxygen path $DOXYGEN" "$LINENO" 5
fi
else
# Extract the first word of "doxygen", so it can be a program name with args.
set dummy doxygen; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_DOXYGEN+set}" = set; then :
+if ${ac_cv_path_DOXYGEN+:} false; then :
$as_echo_n "(cached) " >&6
else
case $DOXYGEN in
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_DOXYGEN="$as_dir/$ac_word$ac_exec_ext"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy dot; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_DOT+set}" = set; then :
+if ${ac_cv_prog_DOT+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$DOT"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_DOT="dot"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy perl; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_PERL+set}" = set; then :
+if ${ac_cv_path_PERL+:} false; then :
$as_echo_n "(cached) " >&6
else
case $PERL in
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_PERL="$as_dir/$ac_word$ac_exec_ext"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy qmake; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_QMAKE+set}" = set; then :
+if ${ac_cv_prog_QMAKE+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$QMAKE"; then
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_QMAKE="qmake"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
set dummy $QMAKE; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_QMAKE+set}" = set; then :
+if ${ac_cv_path_QMAKE+:} false; then :
$as_echo_n "(cached) " >&6
else
case $QMAKE in
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_QMAKE="$as_dir/$ac_word$ac_exec_ext"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
ac_libobjs=
ac_ltlibobjs=
+U=
for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
# 1. Remove the extension, and $U if already installed.
ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
-: ${CONFIG_STATUS=./config.status}
+: "${CONFIG_STATUS=./config.status}"
ac_write_fail=0
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files $CONFIG_STATUS"
IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
case $0 in #((
*[\\/]* ) as_myself=$0 ;;
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-# as_fn_error ERROR [LINENO LOG_FD]
-# ---------------------------------
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with status $?, using 1 if that was 0.
+# script with STATUS, using 1 if that was 0.
as_fn_error ()
{
- as_status=$?; test $as_status -eq 0 && as_status=1
- if test "$3"; then
- as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
fi
- $as_echo "$as_me: error: $1" >&2
+ $as_echo "$as_me: error: $2" >&2
as_fn_exit $as_status
} # as_fn_error
# ... but there are two gotchas:
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
+ # In both cases, we have to default to `cp -pR'.
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
fi
else
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
test -d "$as_dir" && break
done
test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
} # as_fn_mkdir_p
as_mkdir_p=false
fi
-if test -x / >/dev/null 2>&1; then
- as_test_x='test -x'
-else
- if ls -dL / >/dev/null 2>&1; then
- as_ls_L_option=L
- else
- as_ls_L_option=
- fi
- as_test_x='
- eval sh -c '\''
- if test -d "$1"; then
- test -d "$1/.";
- else
- case $1 in #(
- -*)set "./$1";;
- esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
- ???[sx]*):;;*)false;;esac;fi
- '\'' sh
- '
-fi
-as_executable_p=$as_test_x
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by deal.II $as_me 7.3.pre, which was
-generated by GNU Autoconf 2.65. Invocation command line was
+This file was extended by deal.II $as_me 7.3.0, which was
+generated by GNU Autoconf 2.69. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
-deal.II config.status 7.3.pre
-configured by $0, generated by GNU Autoconf 2.65,
+deal.II config.status 7.3.0
+configured by $0, generated by GNU Autoconf 2.69,
with options \\"\$ac_cs_config\\"
-Copyright (C) 2009 Free Software Foundation, Inc.
+Copyright (C) 2012 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
while test $# != 0
do
case $1 in
- --*=*)
+ --*=?*)
ac_option=`expr "X$1" : 'X\([^=]*\)='`
ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
ac_shift=:
;;
+ --*=)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=
+ ac_shift=:
+ ;;
*)
ac_option=$1
ac_optarg=$2
$ac_shift
case $ac_optarg in
*\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ '') as_fn_error $? "missing file argument" ;;
esac
as_fn_append CONFIG_FILES " '$ac_optarg'"
ac_need_defaults=false;;
ac_need_defaults=false;;
--he | --h)
# Conflict between --help and --header
- as_fn_error "ambiguous option: \`$1'
+ as_fn_error $? "ambiguous option: \`$1'
Try \`$0 --help' for more information.";;
--help | --hel | -h )
$as_echo "$ac_cs_usage"; exit ;;
ac_cs_silent=: ;;
# This is an error.
- -*) as_fn_error "unrecognized option: \`$1'
+ -*) as_fn_error $? "unrecognized option: \`$1'
Try \`$0 --help' for more information." ;;
*) as_fn_append ac_config_targets " $1"
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
if \$ac_cs_recheck; then
- set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
shift
\$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
CONFIG_SHELL='$SHELL'
"include/deal.II/base/config.h") CONFIG_HEADERS="$CONFIG_HEADERS include/deal.II/base/config.h" ;;
"$process_files") CONFIG_FILES="$CONFIG_FILES $process_files" ;;
- *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+ *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
esac
done
# after its creation but before its name has been assigned to `$tmp'.
$debug ||
{
- tmp=
+ tmp= ac_tmp=
trap 'exit_status=$?
- { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+ : "${ac_tmp:=$tmp}"
+ { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
' 0
trap 'as_fn_exit 1' 1 2 13 15
}
{
tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
- test -n "$tmp" && test -d "$tmp"
+ test -d "$tmp"
} ||
{
tmp=./conf$$-$RANDOM
(umask 077 && mkdir "$tmp")
-} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
# Set up the scripts for CONFIG_FILES section.
# No need to generate them if there are no CONFIG_FILES.
fi
ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
- ac_cs_awk_cr='\r'
+ ac_cs_awk_cr='\\r'
else
ac_cs_awk_cr=$ac_cr
fi
-echo 'BEGIN {' >"$tmp/subs1.awk" &&
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
_ACEOF
echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
echo "_ACEOF"
} >conf$$subs.sh ||
- as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
-ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
ac_delim='%!_!# '
for ac_last_try in false false false false false :; do
. ./conf$$subs.sh ||
- as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
if test $ac_delim_n = $ac_delim_num; then
break
elif $ac_last_try; then
- as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
else
ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
fi
rm -f conf$$subs.sh
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
_ACEOF
sed -n '
h
rm -f conf$$subs.awk
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
_ACAWK
-cat >>"\$tmp/subs1.awk" <<_ACAWK &&
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
for (key in S) S_is_set[key] = 1
FS = "\a"
sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
else
cat
-fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
- || as_fn_error "could not setup config files machinery" "$LINENO" 5
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
_ACEOF
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
# trailing colons and then remove the whole line if VPATH becomes empty
# (actually we leave an empty line to preserve line numbers).
if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=/{
-s/:*\$(srcdir):*/:/
-s/:*\${srcdir}:*/:/
-s/:*@srcdir@:*/:/
-s/^\([^=]*=[ ]*\):*/\1/
+ ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
+h
+s///
+s/^/:/
+s/[ ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
s/:*$//
+x
+s/\(=[ ]*\).*/\1/
+G
+s/\n//
s/^[^=]*=[ ]*$//
}'
fi
# No need to generate them if there are no CONFIG_HEADERS.
# This happens for instance with `./config.status Makefile'.
if test -n "$CONFIG_HEADERS"; then
-cat >"$tmp/defines.awk" <<\_ACAWK ||
+cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
BEGIN {
_ACEOF
# handling of long lines.
ac_delim='%!_!# '
for ac_last_try in false false :; do
- ac_t=`sed -n "/$ac_delim/p" confdefs.h`
- if test -z "$ac_t"; then
+ ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
+ if test -z "$ac_tt"; then
break
elif $ac_last_try; then
- as_fn_error "could not make $CONFIG_HEADERS" "$LINENO" 5
+ as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
else
ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
fi
_ACAWK
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
- as_fn_error "could not setup config headers machinery" "$LINENO" 5
+ as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
fi # test -n "$CONFIG_HEADERS"
esac
case $ac_mode$ac_tag in
:[FHL]*:*);;
- :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;;
+ :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
:[FH]-) ac_tag=-:-;;
:[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
esac
for ac_f
do
case $ac_f in
- -) ac_f="$tmp/stdin";;
+ -) ac_f="$ac_tmp/stdin";;
*) # Look for the file first in the build tree, then in the source tree
# (if the path is not absolute). The absolute path cannot be DOS-style,
# because $ac_f cannot contain `:'.
[\\/$]*) false;;
*) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
esac ||
- as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+ as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
esac
case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
as_fn_append ac_file_inputs " '$ac_f'"
esac
case $ac_tag in
- *:-:* | *:-) cat >"$tmp/stdin" \
- || as_fn_error "could not create $ac_file" "$LINENO" 5 ;;
+ *:-:* | *:-) cat >"$ac_tmp/stdin" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
esac
;;
esac
s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
$ac_datarootdir_hack
"
-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
- || as_fn_error "could not create $ac_file" "$LINENO" 5
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
- { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
+ "$ac_tmp/out"`; test -z "$ac_out"; } &&
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined." >&5
+which seems to be undefined. Please make sure it is defined" >&5
$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined." >&2;}
+which seems to be undefined. Please make sure it is defined" >&2;}
- rm -f "$tmp/stdin"
+ rm -f "$ac_tmp/stdin"
case $ac_file in
- -) cat "$tmp/out" && rm -f "$tmp/out";;
- *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+ -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+ *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
esac \
- || as_fn_error "could not create $ac_file" "$LINENO" 5
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
;;
:H)
#
if test x"$ac_file" != x-; then
{
$as_echo "/* $configure_input */" \
- && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs"
- } >"$tmp/config.h" \
- || as_fn_error "could not create $ac_file" "$LINENO" 5
- if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then
+ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
+ } >"$ac_tmp/config.h" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
$as_echo "$as_me: $ac_file is unchanged" >&6;}
else
rm -f "$ac_file"
- mv "$tmp/config.h" "$ac_file" \
- || as_fn_error "could not create $ac_file" "$LINENO" 5
+ mv "$ac_tmp/config.h" "$ac_file" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
fi
else
$as_echo "/* $configure_input */" \
- && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \
- || as_fn_error "could not create -" "$LINENO" 5
+ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
+ || as_fn_error $? "could not create -" "$LINENO" 5
fi
;;
ac_clean_files=$ac_clean_files_save
test $ac_write_fail = 0 ||
- as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5
+ as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
# configure is writing to config.log, and then calls config.status.
exec 5>>config.log
# Use ||, not &&, to avoid exiting from the if with $? = 1, which
# would make configure fail if this is the last instruction.
- $ac_cs_success || as_fn_exit $?
+ $ac_cs_success || as_fn_exit 1
fi
#
# The eval makes quoting arguments work.
eval "\$SHELL \"\$ac_sub_configure\" $ac_sub_configure_args \
--cache-file=\"\$ac_sub_cache_file\" --srcdir=\"\$ac_srcdir\"" ||
- as_fn_error "$ac_sub_configure failed for $ac_dir" "$LINENO" 5
+ as_fn_error $? "$ac_sub_configure failed for $ac_dir" "$LINENO" 5
fi
cd "$ac_popdir"
projects / dealii-svn.git / commitdiff