From: Wolfgang Bangerth Date: Tue, 3 Oct 2023 03:18:13 +0000 (-0600) Subject: Document the intention of the numbers::invalid_* variables. X-Git-Tag: relicensing~417^2 X-Git-Url: https://gitweb.dealii.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=2b6bf321d6573c1692fdbe3e096b08c8248e8561;p=dealii.git Document the intention of the numbers::invalid_* variables. --- diff --git a/doc/doxygen/headers/glossary.h b/doc/doxygen/headers/glossary.h index 38055023af..10d7a91672 100644 --- a/doc/doxygen/headers/glossary.h +++ b/doc/doxygen/headers/glossary.h @@ -1234,9 +1234,179 @@ * * * + *
@anchor GlossInvalidValue Invalid value
+ *
+ * A common problem in software design is what to do if a function needs to + * return something like "this value does not exist". An example of this + * could be the function `IndexSet::index_within_set(i)` that returns the + * how many'th element of the set `i` is. Clearly, the return value of this + * function should be an unsigned integer type, the result always being + * a count (zero or positive). The question is what to do if the index + * `i` is not actually in the set. One *could* consider this a bug: You + * can't ask an index set for the position of an index that is not in the + * set, and so an exception should be thrown: The user should first check + * with `IndexSet::is_element(i)` whether `i` is an element of the set, + * and only then should they call `IndexSet::index_within_set(i)`. + * But sometimes there are situations where one simply wants to + * return a regular count if `i` is in the set, and some kind of + * "exceptional" value if it is not. + * + * Similar questions appear when one writes code of the following kind: + * @code + * unsigned int value; + * if (some condition) + * value = 13; + * [...] // much code + * if (some other condition) + * value = 42; + * + * launch_the_rocket(value); // something important and expensive + * @endcode + * Here, the programmer may know that either `some condition` or + * `some other condition` is true, and that consequently `value` is + * always initialized at the end of the block. But there are good + * reasons not to trust this. First, programmers make mistakes, and + * so it is conceivable that there are situations where the variable + * ends up uninitialized, even though that wasn't intended. Second, + * code changes over time and while the "either `some condition` or + * `some other condition` is true" situation may hold at the time + * of development of the software, when code is moved around + * or undergoes bug fixes and functionality enhancement, things may + * change and the variable may go uninitialized. A better way + * to write this code would be like this: + * @code + * unsigned int value = some_invalid_value; + * if (some condition) + * value = 13; + * [...] // much code + * if (some other condition) + * value = 42; + * + * Assert (value != some_invalid_value, "some error message"); + * launch_the_rocket(value); // something important and expensive + * @endcode + * As before, the issue is what `some_invalid_value` should be. + * + * This is such a common problem that many, mostly ad-hoc, solutions + * are widely used. In some cases, parts of the values of a type can + * be used. For example, `sqrt` must necessarily return a + * non-negative value because, well, all square roots are non-negative. + * As a consequence, this function could return error codes as negative + * values. (In truth, though, + * [`sqrt`](https://en.cppreference.com/w/cpp/numeric/math/sqrt) + * returns `NaN` if one provides + * a negative input -- here, `NaN` stands for "not a number" and is, + * just like negative numbers, a stand-in for a value that can not + * happen as part of the regular operations of this function and can + * consequently be used to indicate errors.) Similarly, functions such as + * [`printf()`](https://en.cppreference.com/w/c/io/fprintf) + * either return the number of characters printed or, in case + * of an error in the inputs, a negative value. Finally, the + * [`fopen`](https://en.cppreference.com/w/cpp/io/c/fopen) + * function returns a pointer to a file descriptor (similar to a + * `std::iofstream` object) but if the file cannot be opened, + * for example because the file does not exist or the directory in which + * it supposedly is does not exist, then the function returns a `nullptr`. + * + * All of these examples use that the returned object is of a type whose + * set of possible values contains values that cannot be legitimate + * return values (in mathematical language: they are not part of the + * "range" of the function) and that can consequently be used to indicate + * errors. This is awkward because the mapping of error codes into the + * space of possible return values depends very much on the function and + * what it can and cannot return. For example, `sqrt()` could return `-1` + * as an error, but `sin()` can not because `-1` is a valid return value. + * Also, not all functions allow for this. For example, the + * [`strtol`](https://en.cppreference.com/w/c/string/byte/strtol) + * ("string to long (integer)") function takes a string as input and + * returns a long integer as output. But since clearly every possible + * value of the type `long int` can legitimately be returned, errors in + * the input (say, if someone provided the string `"nonsense"` as + * input) cannot be indicated via the return object, and the function + * needs to indicate errors through another mechanism. The C language + * does that by letting functions such as `strtol` set the global variable + * `errno` to a nonzero value to indicate an error (an approach that + * comes with its own set of problems, among which are that people + * tend to forget the value of this variable after calling the function). + * + * The examples listed above date back to the time when C was first + * developed, in the late 1960s and 1970s. C++ solves this conundrum + * in a more systematic way. First, functions can throw exceptions of + * any type, and one can think of a thrown exception as simply another + * possible return value of functions that indicates errors without + * requiring having a part of the value space of the return type of a + * function occupied for error codes. In fact, the type of an exception + * is completely decoupled from the usual return type: You can pass as + * much information through exceptions you throw, even if the function + * in question returns just a meager `int` in regular operation. This + * approach is used in a number of deal.II functions: If inputs don't + * make sense, the program is either aborted (typically via an + * `Assert` statement) if the inputs are believed to be hard-coded -- + * say, when adding vectors of different length -- or an exception is + * thrown via C++'s `throw` statement. The function + * Mapping::transform_real_to_unit_cell() is an example of the latter. + * Second, in newer C++ standards, one can use the + * [`std::expected`](https://en.cppreference.com/w/cpp/utility/expected) + * class as the return value that can be thought as "this function + * returns objects of type `T`, but if an error was detected, then the + * function instead returns an object of type `E`". You can then ask + * the returned object whether it stores one or the other. In cases of + * errors, one would typically store an explanation of the error in `E`, + * in much the same way as the function could throw an exception of type + * `E`. For example, a perhaps better design for the the `fopen` function + * mentioned above could return `std::expected` where + * if successful, it returns a `FILE` object that identifies the file + * for writing and reading; if it fails, the function would store a textual + * description of what went wrong in the second slot of the `std::expected` + * object (or perhaps an element of an `enum` that simply provides an + * enumeration of possible reasons for failure). Relatedly, if it is not + * necessary to provide a reason for the failure, functions could simply + * return an object of type + * [`std::optional`](https://en.cppreference.com/w/cpp/utility/optional) + * that may or may not hold an object of type `T`, and that one can ask + * about that. This would be the right approach for the + * `IndexSet::index_within_set(i)` function mentioned above: If `i` is + * an element of the set, then it returns an object of type + * `std::optional` that contains the requested value; + * if `i` was not in the set, then it returns an empty + * `std::optional` object. + * + * A third approach, widely used in deal.II, is to *explicitly* declare + * part of the range space as "exceptional". For example, many functions + * in deal.II deal with indices of degrees of freedom. These are encoded + * as unsigned integers, except that we explicitly declare the value + * 4294967295 as an invalid value that indicates an error. (This specific + * value happens to be the largest unsigned integer; computations are + * unlikely to be so large that they use this specific value in a legitimate + * sense.) Many of the data types used in deal.II, such as + * types::global_dof_index, types::active_fe_index, types::material_id + * explicitly consider one possible value representable by these + * types as "invalid" and use it to report errors of uninitialized + * variables. These values typically have names such as + * numbers::invalid_unsigned_int, numbers::invalid_material_id, etc. + * + * (As a postscript, the `strtol` function mentioned above uses this sort of + * approach as well. If the input to that function is invalid, it not only + * sets the global variable `errno`, but *also* returns either `LONG_MAX` + * or `LONG_MIN`. These are the largest and smallest long integer values. + * In other words, the function's definition *explicitly* marks these values + * as "invalid" or "exceptional", even though one could legitimately expect + * to provide the function with a string for which the conversion to a long + * integer would result in these values. This is at its core the same + * approach we use in deal.II with the invalid values mentioned above, + * except that deal.II uses variable names that reflect the underlying + * use case (such as whether a value reflects an invalid value + * for DoF indices or manifold ids), rather than just the type: When + * using numbers::invalid_material_id, you don't need to know what + * type is actually used to represent material ids.) + *
+ * + * *
@anchor GlossLagrange Lagrange elements
*
Finite elements based on Lagrangian interpolation at - * @ref GlossSupport "support points". + * @ref GlossSupport "support points" + * are called "Lagrange elements". Their node functionals correspond + * to evaluation of shape functions at these support points. *
* * diff --git a/include/deal.II/base/index_set.h b/include/deal.II/base/index_set.h index 5c74bb8e8f..b239476a67 100644 --- a/include/deal.II/base/index_set.h +++ b/include/deal.II/base/index_set.h @@ -279,7 +279,7 @@ public: * Return the how-manyth element of this set (counted in ascending order) @p * global_index is. @p global_index needs to be less than the size(). This * function returns numbers::invalid_dof_index if the index @p global_index is not actually - * a member of this index set, i.e. if is_element(global_index) is false. + * a member of this index set, i.e. if `is_element(global_index)` is false. */ size_type index_within_set(const size_type global_index) const; diff --git a/include/deal.II/base/types.h b/include/deal.II/base/types.h index c318ea4c46..fff3fb45d7 100644 --- a/include/deal.II/base/types.h +++ b/include/deal.II/base/types.h @@ -209,6 +209,10 @@ namespace numbers * integer. This value is widely used throughout the library as a marker for * an invalid unsigned integer value, such as an invalid array index, an * invalid array size, and the like. + * + * This value is an example of an + * @ref GlossInvalidValue "invalid value". + * See there for more information. */ static const unsigned int invalid_unsigned_int = static_cast(-1); @@ -218,17 +222,29 @@ namespace numbers * This value is used throughout the library as a marker for an invalid * size_type value, such as an invalid array index, an invalid array size, * and the like. Invalid_size_type is equivalent to invalid_dof_index. + * + * This value is an example of an + * @ref GlossInvalidValue "invalid value". + * See there for more information. */ const types::global_dof_index invalid_size_type = static_cast(-1); /** * An invalid value for active and future fe indices. + * + * This value is an example of an + * @ref GlossInvalidValue "invalid value". + * See there for more information. */ const types::fe_index invalid_fe_index = static_cast(-1); /** * An invalid value for indices of degrees of freedom. + * + * This value is an example of an + * @ref GlossInvalidValue "invalid value". + * See there for more information. */ const types::global_dof_index invalid_dof_index = static_cast(-1); @@ -238,22 +254,34 @@ namespace numbers * entry on * @ref GlossCoarseCellId "coarse cell IDs" * for more information. + * + * This value is an example of an + * @ref GlossInvalidValue "invalid value". + * See there for more information. */ const types::coarse_cell_id invalid_coarse_cell_id = static_cast(-1); /** * Invalid material_id which we need in several places as a default value. - * We assume that all material_ids lie in the range [0, - * invalid_material_id). + * We assume that all material_ids lie in the range `[0, + * invalid_material_id)`. + * + * This value is an example of an + * @ref GlossInvalidValue "invalid value". + * See there for more information. */ const types::material_id invalid_material_id = static_cast(-1); /** * Invalid boundary_id which we need in several places as a default value. - * We assume that all valid boundary_ids lie in the range [0, - * invalid_boundary_id). + * We assume that all valid boundary_ids lie in the range `[0, + * invalid_boundary_id)`. + * + * This value is an example of an + * @ref GlossInvalidValue "invalid value". + * See there for more information. * * @see * @ref GlossBoundaryIndicator "Glossary entry on boundary indicators" @@ -263,14 +291,18 @@ namespace numbers /** * A boundary indicator number that we reserve for internal faces. We - * assume that all valid boundary_ids lie in the range [0, - * internal_face_boundary_id). + * assume that all valid boundary_ids lie in the range `[0, + * internal_face_boundary_id)`. * * This is an indicator that is used internally (by the library) to * differentiate between faces that lie at the boundary of the domain and * faces that lie in the interior of the domain. You should never try to * assign this boundary indicator to anything in user code. * + * This value is an example of an + * @ref GlossInvalidValue "invalid value". + * See there for more information. + * * @see * @ref GlossBoundaryIndicator "Glossary entry on boundary indicators" */ @@ -280,6 +312,10 @@ namespace numbers /** * A manifold_id we reserve for the default flat Cartesian manifold. * + * This value is an example of an + * @ref GlossInvalidValue "invalid value". + * See there for more information. + * * @see * @ref GlossManifoldIndicator "Glossary entry on manifold indicators" */ @@ -291,6 +327,10 @@ namespace numbers * valid id but is used, for example, for default arguments to indicate a * subdomain id that is not to be used. * + * This value is an example of an + * @ref GlossInvalidValue "invalid value". + * See there for more information. + * * See the * @ref GlossSubdomainId "glossary" * for more information. @@ -311,6 +351,10 @@ namespace numbers * as well as the * @ref distributed * module for more information. + * + * This value is an example of an + * @ref GlossInvalidValue "invalid value". + * See there for more information. */ const types::subdomain_id artificial_subdomain_id = static_cast(-2);