From: David Wells Date: Sun, 31 Mar 2024 20:02:27 +0000 (-0400) Subject: QProjector: internally use the combined orientation. X-Git-Tag: v9.6.0-rc1~418^2 X-Git-Url: https://gitweb.dealii.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=56cd36d994c56ce2d1c5028d2263fbe76aaa5f2b;p=dealii.git QProjector: internally use the combined orientation. This replaces a unique indexing scheme for orientations with the standard one. --- diff --git a/source/base/qprojector.cc b/source/base/qprojector.cc index a9dda2cef1..80ca05d5fa 100644 --- a/source/base/qprojector.cc +++ b/source/base/qprojector.cc @@ -30,10 +30,10 @@ namespace internal { namespace { + // Reflect points across the y = x line. std::vector> reflect(const std::vector> &points) { - // Take the points and reflect them by the diagonal std::vector> q_points; q_points.reserve(points.size()); for (const Point<2> &p : points) @@ -43,6 +43,8 @@ namespace internal } + // Rotate points in the plane around the positive z axis (i.e., + // counter-clockwise). std::vector> rotate(const std::vector> &points, const unsigned int n_times) { @@ -146,22 +148,36 @@ namespace internal std::vector> mutate_points_with_offset(const std::vector> &points, - const unsigned int offset) + const unsigned char combined_orientation) { - switch (offset) + // These rotations are backwards (relative to the standard notion of, + // e.g., what rotation index 7 means) since they are rotations about the + // positive z axis in 2d: i.e., they are done from the perspective of + // 'inside' a cell instead of the perspective of an abutting cell. + // + // For example: consider points on face 4 of a hexahedron with + // orientation 3. In 2d, rotating such points clockwise is the same as + // rotating them counter-clockwise from the perspective of the abutting + // face. Hence, such points must be rotated 90 degrees + // counter-clockwise. + switch (combined_orientation) { case 0: - return points; - case 1: + return reflect(points); case 2: - case 3: - return rotate(points, offset); + return rotate(reflect(points), 3); case 4: - return reflect(points); - case 5: + return rotate(reflect(points), 2); case 6: + return rotate(reflect(points), 1); + case 1: + return points; + case 3: + return rotate(points, 1); + case 5: + return rotate(points, 2); case 7: - return rotate(reflect(points), 8 - offset); + return rotate(points, 3); default: DEAL_II_ASSERT_UNREACHABLE(); } @@ -170,25 +186,11 @@ namespace internal Quadrature<2> mutate_quadrature(const Quadrature<2> &quadrature, - const bool face_orientation, - const bool face_flip, - const bool face_rotation) + const unsigned char combined_orientation) { - static const unsigned int offset[2][2][2] = { - {{4, 5}, // face_orientation=false; face_flip=false; - // face_rotation=false and true - {6, 7}}, // face_orientation=false; face_flip=true; - // face_rotation=false and true - {{0, 1}, // face_orientation=true; face_flip=false; - // face_rotation=false and true - {2, 3}}}; // face_orientation=true; face_flip=true; - // face_rotation=false and true - - return Quadrature<2>( - mutate_points_with_offset( - quadrature.get_points(), - offset[face_orientation][face_flip][face_rotation]), - quadrature.get_weights()); + return Quadrature<2>(mutate_points_with_offset(quadrature.get_points(), + combined_orientation), + quadrature.get_weights()); } std::pair> @@ -463,7 +465,10 @@ QProjector<3>::project_to_oriented_face(const ReferenceCell &reference_cell, Assert(reference_cell == ReferenceCells::Hexahedron, ExcNotImplemented()); const Quadrature<2> mutation = internal::QProjector::mutate_quadrature( - quadrature, face_orientation, face_flip, face_rotation); + quadrature, + internal::combined_face_orientation(face_orientation, + face_rotation, + face_flip)); return QProjector<3>::project_to_face(reference_cell, mutation, face_no); } @@ -696,7 +701,10 @@ QProjector<3>::project_to_oriented_subface( Assert(reference_cell == ReferenceCells::Hexahedron, ExcNotImplemented()); const Quadrature<2> mutation = internal::QProjector::mutate_quadrature( - quadrature, face_orientation, face_flip, face_rotation); + quadrature, + internal::combined_face_orientation(face_orientation, + face_rotation, + face_flip)); const std::pair> final_subface_no_and_ref_case = @@ -1025,7 +1033,7 @@ QProjector<3>::project_to_all_faces(const ReferenceCell &reference_cell, std::vector weights; weights.reserve(n_points_total); - for (unsigned int offset = 0; offset < 8; ++offset) + for (unsigned char offset = 0; offset < 8; ++offset) { const auto mutation = internal::QProjector::mutate_points_with_offset( quadrature[0].get_points(), offset); @@ -1181,7 +1189,7 @@ QProjector<3>::project_to_all_subfaces(const ReferenceCell &reference_cell, // do the following for all possible mutations of a face (mutation==0 // corresponds to a face with standard orientation, no flip and no rotation) - for (unsigned int offset = 0; offset < 8; ++offset) + for (unsigned char offset = 0; offset < 8; ++offset) { const auto mutation = internal::QProjector::mutate_points_with_offset(quadrature.get_points(), @@ -1340,8 +1348,6 @@ QProjector::DataSetDescriptor::face( const unsigned char combined_orientation, const unsigned int n_quadrature_points) { - const auto [face_orientation, face_rotation, face_flip] = - internal::split_face_orientation(combined_orientation); // TODO: once we move to representing the default orientation as 0 (instead of // 1) we can get rid of the dim = 1 check Assert(dim == 1 || @@ -1375,53 +1381,10 @@ QProjector::DataSetDescriptor::face( case 1: case 2: return face_no * n_quadrature_points; - - case 3: - { - // in 3d, we have to account for faces that - // have non-standard face orientation, flip - // and rotation. thus, we have to store - // _eight_ data sets per face or subface - - // set up a table with the according offsets - // for non-standard orientation, first index: - // face_orientation (standard true=1), second - // index: face_flip (standard false=0), third - // index: face_rotation (standard false=0) - // - // note, that normally we should use the - // obvious offsets 0,1,2,3,4,5,6,7. However, - // prior to the changes enabling flipped and - // rotated faces, in many places of the - // library the convention was used, that the - // first dataset with offset 0 corresponds to - // a face in standard orientation. therefore - // we use the offsets 4,5,6,7,0,1,2,3 here to - // stick to that (implicit) convention - static const unsigned int offset[2][2][2] = { - {{4 * GeometryInfo::faces_per_cell, - 5 * GeometryInfo:: - faces_per_cell}, // face_orientation=false; face_flip=false; - // face_rotation=false and true - {6 * GeometryInfo::faces_per_cell, - 7 * GeometryInfo:: - faces_per_cell}}, // face_orientation=false; face_flip=true; - // face_rotation=false and true - {{0 * GeometryInfo::faces_per_cell, - 1 * GeometryInfo:: - faces_per_cell}, // face_orientation=true; face_flip=false; - // face_rotation=false and true - {2 * GeometryInfo::faces_per_cell, - 3 * GeometryInfo:: - faces_per_cell}}}; // face_orientation=true; face_flip=true; - // face_rotation=false and true - - return ( - (face_no + offset[face_orientation][face_flip][face_rotation]) * - n_quadrature_points); - } - + return (face_no + + GeometryInfo::faces_per_cell * combined_orientation) * + n_quadrature_points; default: DEAL_II_ASSERT_UNREACHABLE(); } @@ -1458,9 +1421,6 @@ QProjector::DataSetDescriptor::face( const unsigned char combined_orientation, const hp::QCollection &quadrature) { - const auto [face_orientation, face_rotation, face_flip] = - internal::split_face_orientation(combined_orientation); - if (reference_cell == ReferenceCells::Triangle || reference_cell == ReferenceCells::Tetrahedron || reference_cell == ReferenceCells::Wedge || @@ -1526,41 +1486,9 @@ QProjector::DataSetDescriptor::face( } case 3: { - // in 3d, we have to account for faces that - // have non-standard face orientation, flip - // and rotation. thus, we have to store - // _eight_ data sets per face or subface - - // set up a table with the according offsets - // for non-standard orientation, first index: - // face_orientation (standard true=1), second - // index: face_flip (standard false=0), third - // index: face_rotation (standard false=0) - // - // note, that normally we should use the - // obvious offsets 0,1,2,3,4,5,6,7. However, - // prior to the changes enabling flipped and - // rotated faces, in many places of the - // library the convention was used, that the - // first dataset with offset 0 corresponds to - // a face in standard orientation. therefore - // we use the offsets 4,5,6,7,0,1,2,3 here to - // stick to that (implicit) convention - static const unsigned int offset[2][2][2] = { - {{4, 5}, // face_orientation=false; face_flip=false; - // face_rotation=false and true - {6, 7}}, // face_orientation=false; face_flip=true; - // face_rotation=false and true - {{0, 1}, // face_orientation=true; face_flip=false; - // face_rotation=false and true - {2, 3}}}; // face_orientation=true; face_flip=true; - // face_rotation=false and true - - if (quadrature.size() == 1) return (face_no + - offset[face_orientation][face_flip][face_rotation] * - GeometryInfo::faces_per_cell) * + combined_orientation * GeometryInfo::faces_per_cell) * quadrature[0].size(); else { @@ -1573,9 +1501,7 @@ QProjector::DataSetDescriptor::face( ++i) n_points += quadrature[i].size(); - return (n_points_i + - offset[face_orientation][face_flip][face_rotation] * - n_points); + return n_points_i + combined_orientation * n_points; } } @@ -1680,61 +1606,16 @@ QProjector<3>::DataSetDescriptor::subface( Assert(subface_no < GeometryInfo::max_children_per_face, ExcInternalError()); - // As the quadrature points created by - // QProjector are on subfaces in their - // "standard location" we have to use a - // permutation of the equivalent subface - // number in order to respect face - // orientation, flip and rotation. The - // information we need here is exactly the - // same as the - // GeometryInfo<3>::child_cell_on_face info - // for the bottom face (face 4) of a hex, as - // on this the RefineCase of the cell matches - // that of the face and the subfaces are - // numbered in the same way as the child - // cells. - // in 3d, we have to account for faces that - // have non-standard face orientation, flip - // and rotation. thus, we have to store - // _eight_ data sets per face or subface - // already for the isotropic + // have non-standard orientation. thus, we + // have to store _eight_ data sets per face + // or subface already for the isotropic // case. Additionally, we have three // different refinement cases, resulting in // 4 + 2 + 2 = 8 different subfaces // for each face. const unsigned int total_subfaces_per_face = 8; - // set up a table with the according offsets - // for non-standard orientation, first index: - // face_orientation (standard true=1), second - // index: face_flip (standard false=0), third - // index: face_rotation (standard false=0) - // - // note, that normally we should use the - // obvious offsets 0,1,2,3,4,5,6,7. However, - // prior to the changes enabling flipped and - // rotated faces, in many places of the - // library the convention was used, that the - // first dataset with offset 0 corresponds to - // a face in standard orientation. therefore - // we use the offsets 4,5,6,7,0,1,2,3 here to - // stick to that (implicit) convention - static const unsigned int orientation_offset[2][2][2] = { - {// face_orientation=false; face_flip=false; face_rotation=false and true - {4 * GeometryInfo::faces_per_cell * total_subfaces_per_face, - 5 * GeometryInfo::faces_per_cell * total_subfaces_per_face}, - // face_orientation=false; face_flip=true; face_rotation=false and true - {6 * GeometryInfo::faces_per_cell * total_subfaces_per_face, - 7 * GeometryInfo::faces_per_cell * total_subfaces_per_face}}, - {// face_orientation=true; face_flip=false; face_rotation=false and true - {0 * GeometryInfo::faces_per_cell * total_subfaces_per_face, - 1 * GeometryInfo::faces_per_cell * total_subfaces_per_face}, - // face_orientation=true; face_flip=true; face_rotation=false and true - {2 * GeometryInfo::faces_per_cell * total_subfaces_per_face, - 3 * GeometryInfo::faces_per_cell * total_subfaces_per_face}}}; - // set up a table with the offsets for a // given refinement case respecting the // corresponding number of subfaces. the @@ -1761,11 +1642,12 @@ QProjector<3>::DataSetDescriptor::subface( internal::QProjector::select_subface_no_and_refinement_case( subface_no, face_orientation, face_flip, face_rotation, ref_case); - return (((face_no * total_subfaces_per_face + - ref_case_offset[final_subface_no_and_ref_case.second - 1] + - final_subface_no_and_ref_case.first) + - orientation_offset[face_orientation][face_flip][face_rotation]) * - n_quadrature_points); + return ((face_no * total_subfaces_per_face + + ref_case_offset[final_subface_no_and_ref_case.second - 1] + + final_subface_no_and_ref_case.first) + + GeometryInfo::faces_per_cell * total_subfaces_per_face * + combined_orientation) * + n_quadrature_points; } diff --git a/source/grid/grid_out.cc b/source/grid/grid_out.cc index b4c9c75e65..1daf6d7eaf 100644 --- a/source/grid/grid_out.cc +++ b/source/grid/grid_out.cc @@ -4287,7 +4287,12 @@ namespace internal std::vector> line_points; // compute offset of quadrature points within set of // projected points - const unsigned int offset = face_no * n_points; + const auto offset = + QProjector::DataSetDescriptor::face( + cell->reference_cell(), + face_no, + cell->combined_face_orientation(face_no), + n_points); for (unsigned int i = 0; i < n_points; ++i) line_points.push_back( mapping->transform_unit_to_real_cell( @@ -4497,7 +4502,12 @@ namespace internal if (face->at_boundary() && gnuplot_flags.write_additional_boundary_lines) { - const unsigned int offset = face_no * n_points * n_points; + const auto offset = + QProjector::DataSetDescriptor::face( + cell->reference_cell(), + face_no, + cell->combined_face_orientation(face_no), + n_points * n_points); for (unsigned int i = 0; i < n_points - 1; ++i) for (unsigned int j = 0; j < n_points - 1; ++j) { @@ -4804,7 +4814,12 @@ namespace internal // of the line // and generate // line-lets - const unsigned int offset = face_no * n_points; + const auto offset = + QProjector::DataSetDescriptor::face( + cell->reference_cell(), + face_no, + cell->combined_face_orientation(face_no), + n_points); for (unsigned int i = 0; i < n_points; ++i) { const Point p1_dim(