From: Martin Kronbichler Date: Sat, 12 Jun 2021 19:06:39 +0000 (+0200) Subject: More straight-forward version of FE_RaviartThomasNodal X-Git-Tag: v9.4.0-rc1~1144^2~2 X-Git-Url: https://gitweb.dealii.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=a2781d382cbd583167e9c967b34383ac26c60f75;p=dealii.git More straight-forward version of FE_RaviartThomasNodal --- diff --git a/include/deal.II/fe/fe_raviart_thomas.h b/include/deal.II/fe/fe_raviart_thomas.h index 0679aa3429..ab12990c5e 100644 --- a/include/deal.II/fe/fe_raviart_thomas.h +++ b/include/deal.II/fe/fe_raviart_thomas.h @@ -18,11 +18,7 @@ #include -#include -#include -#include #include -#include #include #include @@ -309,29 +305,23 @@ private: * For this Raviart-Thomas element, the node values are not cell and face * moments with respect to certain polynomials, but the values in quadrature * points. Following the general scheme for numbering degrees of freedom, the - * node values on edges are first, edge by edge, according to the natural - * ordering of the edges of a cell. The interior degrees of freedom are last. + * node values on faces (edges in 2D, quads in 3D) are first, face by face, + * according to the natural ordering of the faces of a cell. The interior + * degrees of freedom are last. * * For an RT-element of degree k, we choose (k+1)d-1 * Gauss points on each face. These points are ordered lexicographically with * respect to the orientation of the face. This way, the normal component - * which is in Qk is uniquely determined. Furthermore, since - * this Gauss-formula is exact on Q2k+1, these node values - * correspond to the exact integration of the moments of the RT-space. + * which is in Qk, is uniquely determined. Furthermore, + * since this Gauss-formula is exact for polynomials of degree 2k+1, + * these node values correspond to the exact integration of the moments of the + * RT-space. * - * In the interior of the cells, the moments are with respect to an - * anisotropic Qk space, where the test functions are one - * degree lower in the direction corresponding to the vector component under - * consideration. This is emulated by using an anisotropic Gauss formula for - * integration. - * - * @todo The current implementation is for Cartesian meshes only. You must use - * MappingCartesian. - * - * @todo Even if this element is implemented for two and three space - * dimensions, the definition of the node values relies on consistently - * oriented faces in 3D. Therefore, care should be taken on complicated - * meshes. + * These face polynomials are extended into the interior by the means of a + * QGaussLobatto formula for the normal direction. In other words, the + * polynomials are the tensor product of Lagrange polynomials on the points of + * a QGaussLobatto formula in the normal direction with Lagrange polynomials + * on the points of a QGauss quadrature formula. * * @note The degree stored in the member variable * FiniteElementData::degree is higher by one than the constructor @@ -358,11 +348,6 @@ public: virtual std::unique_ptr> clone() const override; - virtual void - convert_generalized_support_point_values_to_dof_values( - const std::vector> &support_point_values, - std::vector & nodal_values) const override; - virtual void get_face_interpolation_matrix(const FiniteElement &source, FullMatrix & matrix, @@ -374,6 +359,12 @@ public: const unsigned int subface, FullMatrix & matrix, const unsigned int face_no = 0) const override; + + virtual void + convert_generalized_support_point_values_to_dof_values( + const std::vector> &support_point_values, + std::vector & nodal_values) const override; + virtual bool hp_constraints_are_implemented() const override; @@ -394,51 +385,37 @@ public: compare_for_domination(const FiniteElement &fe_other, const unsigned int codim = 0) const override final; -private: - /** - * Only for internal use. Its full name is @p get_dofs_per_object_vector - * function and it creates the @p dofs_per_object vector that is needed - * within the constructor to be passed to the constructor of @p - * FiniteElementData. - */ - static std::vector - get_dpo_vector(const unsigned int degree); + virtual const FullMatrix & + get_restriction_matrix( + const unsigned int child, + const RefinementCase &refinement_case = + RefinementCase::isotropic_refinement) const override; - /** - * Compute the vector used for the @p restriction_is_additive field passed - * to the base class's constructor. - */ - static std::vector - get_ria_vector(const unsigned int degree); + virtual const FullMatrix & + get_prolongation_matrix( + const unsigned int child, + const RefinementCase &refinement_case = + RefinementCase::isotropic_refinement) const override; +private: /** * This function returns @p true, if the shape function @p shape_index has * non-zero function values somewhere on the face @p face_index. - * - * Right now, this is only implemented for RT0 in 1D. Otherwise, returns - * always @p true. */ virtual bool has_support_on_face(const unsigned int shape_index, const unsigned int face_index) const override; - /** - * Initialize the FiniteElement::generalized_support_points and - * FiniteElement::generalized_face_support_points fields. Called from - * the constructor. - * - * See the - * @ref GlossGeneralizedSupport "glossary entry on generalized support points" - * for more information. - */ - void - initialize_support_points(const unsigned int rt_degree); - /** * Initialize the permutation pattern and the pattern of sign change. */ void initialize_quad_dof_index_permutation_and_sign_change(); + + /* + * Mutex for protecting initialization of restriction and embedding matrix. + */ + mutable Threads::Mutex mutex; }; diff --git a/source/fe/fe_raviart_thomas.cc b/source/fe/fe_raviart_thomas.cc index bcf3513c5f..85c78506b8 100644 --- a/source/fe/fe_raviart_thomas.cc +++ b/source/fe/fe_raviart_thomas.cc @@ -14,6 +14,8 @@ // --------------------------------------------------------------------- +#include +#include #include #include #include diff --git a/source/fe/fe_raviart_thomas_nodal.cc b/source/fe/fe_raviart_thomas_nodal.cc index 086679cb46..aa4a1b9d73 100644 --- a/source/fe/fe_raviart_thomas_nodal.cc +++ b/source/fe/fe_raviart_thomas_nodal.cc @@ -14,8 +14,10 @@ // --------------------------------------------------------------------- +#include #include #include +#include #include @@ -23,78 +25,441 @@ #include #include #include -#include #include -#include -#include - #include #include DEAL_II_NAMESPACE_OPEN -// TODO: implement the adjust_quad_dof_index_for_face_orientation_table and -// adjust_line_dof_index_for_line_orientation_table fields, and write tests -// similar to bits/face_orientation_and_fe_q_* + +// ---------------- polynomial class for FE_RaviartThomasNodal --------------- + +namespace +{ + template + class PolynomialsRaviartThomasNodal : public TensorPolynomialsBase + { + public: + PolynomialsRaviartThomasNodal(const unsigned int degree); + + /** + * Compute the value and derivatives of each Raviart-Thomas polynomial at + * @p unit_point. + * + * The size of the vectors must either be zero or equal n(). In + * the first case, the function will not compute these values. + */ + void + evaluate(const Point & unit_point, + std::vector> &values, + std::vector> &grads, + std::vector> &grad_grads, + std::vector> &third_derivatives, + std::vector> &fourth_derivatives) const override; + + /** + * Return the name of the space, which is PolynomialsRaviartThomas. + */ + std::string + name() const override; + + /** + * Return the number of polynomials in the space without requiring to + * build an object of PolynomialsRaviartThomas. This is required by the + * FiniteElement classes. + */ + static unsigned int + n_polynomials(const unsigned int degree); + + const std::vector & + get_renumbering() const; + + /** + * @copydoc TensorPolynomialsBase::clone() + */ + virtual std::unique_ptr> + clone() const override; + + /** + * Compute the generalized support points of the associated element in the + * ordering of the element. Note that they are not support points in the + * classical sense as polynomials of the different components have + * different points, which need to be combined in terms of Piola + * transforms. + */ + std::vector> + get_polynomial_support_points() const; + + private: + /** + * The degree variable passed to the constructor. + */ + const unsigned int degree; + + /** + * An object representing the polynomial space for a single component. We + * can re-use it by rotating the coordinates of the evaluation point. + */ + const AnisotropicPolynomials polynomial_space; + + /** + * Renumbering from lexicographic to hierarchic order. + */ + std::vector lexicographic_to_hierarchic; + + /** + * Renumbering from hierarchic to lexicographic order. Inverse of + * lexicographic_to_hierarchic. + */ + std::vector hierarchic_to_lexicographic; + + /** + * Renumbering from shifted polynomial spaces to lexicographic one + */ + std::array, dim> renumber_aniso; + }; + + + + // Create nodal Raviart-Thomas polynomials as the tensor product of Lagrange + // polynomials on Gauss-Lobatto points of degree + 2 points in the + // continuous direction and degree + 1 points in the discontinuous + // directions (we could also choose Lagrange polynomials on Gauss points but + // those are slightly more expensive to handle in classes). + std::vector>> + create_rt_polynomials(const unsigned int dim, const unsigned int degree) + { + std::vector>> pols(dim); + pols[0] = Polynomials::generate_complete_Lagrange_basis( + QGaussLobatto<1>(degree + 2).get_points()); + if (degree > 0) + for (unsigned int d = 1; d < dim; ++d) + pols[d] = Polynomials::generate_complete_Lagrange_basis( + QGaussLobatto<1>(degree + 1).get_points()); + else + for (unsigned int d = 1; d < dim; ++d) + pols[d] = Polynomials::generate_complete_Lagrange_basis( + QMidpoint<1>().get_points()); + + return pols; + } + + + + // set up the numbering of the rt polynomials + std::vector + compute_rt_hierarchic_to_lexicographic(const unsigned int dim, + const unsigned int degree) + { + const unsigned int n_pols = + (degree + 2) * Utilities::pow(degree + 1, dim - 1); + + std::vector hierarchic_to_lexicographic; + + // dofs on faces + for (unsigned int face_no = 0; face_no < 2 * dim; ++face_no) + { + const unsigned int stride_x = face_no < 2 ? degree + 2 : 1; + const unsigned int stride_y = + face_no < 4 ? (degree + 2) * (degree + 1) : degree + 1; + const unsigned int offset = + (face_no % 2) * Utilities::pow(degree + 1, 1 + face_no / 2); + for (unsigned int j = 0; j < (dim > 2 ? degree + 1 : 1); ++j) + for (unsigned int i = 0; i < degree + 1; ++i) + hierarchic_to_lexicographic.push_back( + (face_no / 2) * n_pols + offset + i * stride_x + j * stride_y); + } + // dofs on cells, starting with x component... + for (unsigned int k = 0; k < (dim > 2 ? degree + 1 : 1); ++k) + for (unsigned int j = 0; j < (dim > 1 ? degree + 1 : 1); ++j) + for (unsigned int i = 1; i < degree + 1; ++i) + hierarchic_to_lexicographic.push_back( + k * (degree + 1) * (degree + 2) + j * (degree + 2) + i); + // ... then y component ... + if (dim > 1) + for (unsigned int k = 0; k < (dim > 2 ? degree + 1 : 1); ++k) + for (unsigned int j = 1; j < degree + 1; ++j) + for (unsigned int i = 0; i < degree + 1; ++i) + hierarchic_to_lexicographic.push_back( + n_pols + k * (degree + 1) * (degree + 2) + j * (degree + 1) + i); + // ... and finally z component + if (dim > 2) + for (unsigned int k = 1; k < degree + 1; ++k) + for (unsigned int j = 0; j < degree + 1; ++j) + for (unsigned int i = 0; i < degree + 1; ++i) + hierarchic_to_lexicographic.push_back( + 2 * n_pols + k * (degree + 1) * (degree + 1) + j * (degree + 1) + + i); + + AssertDimension(hierarchic_to_lexicographic.size(), n_pols * dim); + +#ifdef DEBUG + // assert that we have a valid permutation + std::vector copy(hierarchic_to_lexicographic); + std::sort(copy.begin(), copy.end()); + for (unsigned int i = 0; i < copy.size(); ++i) + AssertDimension(i, copy[i]); +#endif + + return hierarchic_to_lexicographic; + } + + + + template + PolynomialsRaviartThomasNodal::PolynomialsRaviartThomasNodal( + const unsigned int degree) + : TensorPolynomialsBase(degree, n_polynomials(degree)) + , degree(degree) + , polynomial_space(create_rt_polynomials(dim, degree)) + { + // create renumbering of the unknowns from the lexicographic order to the + // actual order required by the finite element class with unknowns on + // faces placed first + const unsigned int n_pols = polynomial_space.n(); + hierarchic_to_lexicographic = + compute_rt_hierarchic_to_lexicographic(dim, degree); + + lexicographic_to_hierarchic = + Utilities::invert_permutation(hierarchic_to_lexicographic); + + // since we only store an anisotropic polynomial for the first component, + // we set up a second numbering to switch out the actual coordinate + // direction + renumber_aniso[0].resize(n_pols); + for (unsigned int i = 0; i < n_pols; ++i) + renumber_aniso[0][i] = i; + if (dim > 1) + { + // switch x and y component (i and j loops) + renumber_aniso[1].resize(n_pols); + for (unsigned int k = 0; k < (dim > 2 ? degree + 1 : 1); ++k) + for (unsigned int j = 0; j < degree + 2; ++j) + for (unsigned int i = 0; i < degree + 1; ++i) + renumber_aniso[1][(k * (degree + 2) + j) * (degree + 1) + i] = + j + i * (degree + 2) + k * (degree + 2) * (degree + 1); + } + if (dim > 2) + { + // switch x and z component (i and k loops) + renumber_aniso[2].resize(n_pols); + for (unsigned int k = 0; k < degree + 2; ++k) + for (unsigned int j = 0; j < degree + 1; ++j) + for (unsigned int i = 0; i < degree + 1; ++i) + renumber_aniso[2][(k * (degree + 1) + j) * (degree + 1) + i] = + k + i * (degree + 2) + j * (degree + 2) * (degree + 1); + } + } + + + + template + void + PolynomialsRaviartThomasNodal::evaluate( + const Point & unit_point, + std::vector> &values, + std::vector> &grads, + std::vector> &grad_grads, + std::vector> &third_derivatives, + std::vector> &fourth_derivatives) const + { + Assert(values.size() == this->n() || values.size() == 0, + ExcDimensionMismatch(values.size(), this->n())); + Assert(grads.size() == this->n() || grads.size() == 0, + ExcDimensionMismatch(grads.size(), this->n())); + Assert(grad_grads.size() == this->n() || grad_grads.size() == 0, + ExcDimensionMismatch(grad_grads.size(), this->n())); + Assert(third_derivatives.size() == this->n() || + third_derivatives.size() == 0, + ExcDimensionMismatch(third_derivatives.size(), this->n())); + Assert(fourth_derivatives.size() == this->n() || + fourth_derivatives.size() == 0, + ExcDimensionMismatch(fourth_derivatives.size(), this->n())); + + std::vector p_values; + std::vector> p_grads; + std::vector> p_grad_grads; + std::vector> p_third_derivatives; + std::vector> p_fourth_derivatives; + + const unsigned int n_sub = polynomial_space.n(); + p_values.resize((values.size() == 0) ? 0 : n_sub); + p_grads.resize((grads.size() == 0) ? 0 : n_sub); + p_grad_grads.resize((grad_grads.size() == 0) ? 0 : n_sub); + p_third_derivatives.resize((third_derivatives.size() == 0) ? 0 : n_sub); + p_fourth_derivatives.resize((fourth_derivatives.size() == 0) ? 0 : n_sub); + + for (unsigned int d = 0; d < dim; ++d) + { + // First we copy the point. The polynomial space for component d + // consists of polynomials of degree k in x_d and degree k+1 in the + // other variables. in order to simplify this, we use the same + // AnisotropicPolynomial space and simply rotate the coordinates + // through all directions. + Point p; + for (unsigned int c = 0; c < dim; ++c) + p(c) = unit_point((c + d) % dim); + + polynomial_space.evaluate(p, + p_values, + p_grads, + p_grad_grads, + p_third_derivatives, + p_fourth_derivatives); + + for (unsigned int i = 0; i < p_values.size(); ++i) + values[lexicographic_to_hierarchic[i + d * n_sub]][d] = + p_values[renumber_aniso[d][i]]; + + for (unsigned int i = 0; i < p_grads.size(); ++i) + for (unsigned int d1 = 0; d1 < dim; ++d1) + grads[lexicographic_to_hierarchic[i + d * n_sub]][d] + [(d1 + d) % dim] = p_grads[renumber_aniso[d][i]][d1]; + + for (unsigned int i = 0; i < p_grad_grads.size(); ++i) + for (unsigned int d1 = 0; d1 < dim; ++d1) + for (unsigned int d2 = 0; d2 < dim; ++d2) + grad_grads[lexicographic_to_hierarchic[i + d * n_sub]][d] + [(d1 + d) % dim][(d2 + d) % dim] = + p_grad_grads[renumber_aniso[d][i]][d1][d2]; + + for (unsigned int i = 0; i < p_third_derivatives.size(); ++i) + for (unsigned int d1 = 0; d1 < dim; ++d1) + for (unsigned int d2 = 0; d2 < dim; ++d2) + for (unsigned int d3 = 0; d3 < dim; ++d3) + third_derivatives[lexicographic_to_hierarchic[i + d * n_sub]][d] + [(d1 + d) % dim][(d2 + d) % dim] + [(d3 + d) % dim] = + p_third_derivatives[renumber_aniso[d][i]][d1] + [d2][d3]; + + for (unsigned int i = 0; i < p_fourth_derivatives.size(); ++i) + for (unsigned int d1 = 0; d1 < dim; ++d1) + for (unsigned int d2 = 0; d2 < dim; ++d2) + for (unsigned int d3 = 0; d3 < dim; ++d3) + for (unsigned int d4 = 0; d4 < dim; ++d4) + fourth_derivatives[lexicographic_to_hierarchic[i + d * n_sub]] + [d][(d1 + d) % dim][(d2 + d) % dim] + [(d3 + d) % dim][(d4 + d) % dim] = + p_fourth_derivatives[renumber_aniso[d][i]] + [d1][d2][d3][d4]; + } + } + + + + template + std::string + PolynomialsRaviartThomasNodal::name() const + { + return "PolynomialsRaviartThomasNodal"; + } + + + + template + unsigned int + PolynomialsRaviartThomasNodal::n_polynomials(unsigned int degree) + { + return dim * (degree + 2) * Utilities::pow(degree + 1, dim - 1); + } + + + + template + std::unique_ptr> + PolynomialsRaviartThomasNodal::clone() const + { + return std::make_unique>(*this); + } + + + + template + std::vector> + PolynomialsRaviartThomasNodal::get_polynomial_support_points() const + { + Assert(dim > 0 && dim <= 3, ExcImpossibleInDim(dim)); + const Quadrature<1> low( + degree == 0 ? static_cast>(QMidpoint<1>()) : + static_cast>(QGaussLobatto<1>(degree + 1))); + const QGaussLobatto<1> high(degree + 2); + const QAnisotropic quad = + (dim == 1 ? QAnisotropic(high) : + (dim == 2 ? QAnisotropic(high, low) : + QAnisotropic(high, low, low))); + + const unsigned int n_sub = polynomial_space.n(); + std::vector> points(dim * n_sub); + points.resize(n_polynomials(degree)); + for (unsigned int d = 0; d < dim; ++d) + for (unsigned int i = 0; i < n_sub; ++i) + points[lexicographic_to_hierarchic[i + d * n_sub]] = + quad.point(renumber_aniso[d][i]); + return points; + } + + + + // Return a vector of "dofs per object" where the components of the returned + // vector refer to: + // 0 = vertex + // 1 = edge + // 2 = face (which is a cell in 2D) + // 3 = cell + std::vector + get_rt_dpo_vector(const unsigned int dim, const unsigned int degree) + { + std::vector dpo(dim + 1); + dpo[0] = 0; + dpo[1] = 0; + unsigned int dofs_per_face = 1; + for (unsigned int d = 1; d < dim; ++d) + dofs_per_face *= (degree + 1); + + dpo[dim - 1] = dofs_per_face; + dpo[dim] = dim * degree * dofs_per_face; + + return dpo; + } +} // namespace + + + +// --------------------- actual implementation of element -------------------- template -FE_RaviartThomasNodal::FE_RaviartThomasNodal(const unsigned int deg) - : FE_PolyTensor(PolynomialsRaviartThomas(deg), - FiniteElementData(get_dpo_vector(deg), +FE_RaviartThomasNodal::FE_RaviartThomasNodal(const unsigned int degree) + : FE_PolyTensor(PolynomialsRaviartThomasNodal(degree), + FiniteElementData(get_rt_dpo_vector(dim, degree), dim, - deg + 1, + degree + 1, FiniteElementData::Hdiv), - get_ria_vector(deg), + std::vector(1, false), std::vector( - PolynomialsRaviartThomas::n_polynomials(deg), + PolynomialsRaviartThomasNodal::n_polynomials( + degree), std::vector(dim, true))) { Assert(dim >= 2, ExcImpossibleInDim(dim)); - const unsigned int n_dofs = this->n_dofs_per_cell(); this->mapping_kind = {mapping_raviart_thomas}; - // First, initialize the - // generalized support points and - // quadrature weights, since they - // are required for interpolation. - initialize_support_points(deg); - - // Now compute the inverse node matrix, generating the correct - // basis functions from the raw ones. For a discussion of what - // exactly happens here, see FETools::compute_node_matrix. - const FullMatrix M = FETools::compute_node_matrix(*this); - this->inverse_node_matrix.reinit(n_dofs, n_dofs); - this->inverse_node_matrix.invert(M); - // From now on, the shape functions provided by FiniteElement::shape_value - // and similar functions will be the correct ones, not - // the raw shape functions from the polynomial space anymore. - - // Reinit the vectors of - // prolongation matrices to the - // right sizes. There are no - // restriction matrices implemented - for (unsigned int ref_case = RefinementCase::cut_x; - ref_case < RefinementCase::isotropic_refinement + 1; - ++ref_case) - { - const unsigned int nc = - GeometryInfo::n_children(RefinementCase(ref_case)); - for (unsigned int i = 0; i < nc; ++i) - this->prolongation[ref_case - 1][i].reinit(n_dofs, n_dofs); - } + // First, initialize the generalized support points and quadrature weights, + // since they are required for interpolation. + this->generalized_support_points = + PolynomialsRaviartThomasNodal(degree).get_polynomial_support_points(); + AssertDimension(this->generalized_support_points.size(), + this->n_dofs_per_cell()); - // TODO: the implementation makes the assumption that all faces have the - // same number of dofs - AssertDimension(this->n_unique_faces(), 1); const unsigned int face_no = 0; + if (dim > 1) + this->generalized_face_support_points[face_no] = + degree == 0 ? QGauss(1).get_points() : + QGaussLobatto(degree + 1).get_points(); - // Fill prolongation matrices with embedding operators - FETools::compute_embedding_matrices(*this, this->prolongation); - // TODO[TL]: for anisotropic refinement we will probably need a table of - // submatrices with an array for each refine case FullMatrix face_embeddings[GeometryInfo::max_children_per_face]; for (unsigned int i = 0; i < GeometryInfo::max_children_per_face; ++i) face_embeddings[i].reinit(this->n_dofs_per_face(face_no), @@ -103,7 +468,7 @@ FE_RaviartThomasNodal::FE_RaviartThomasNodal(const unsigned int deg) face_embeddings, 0, 0); - this->interface_constraints.reinit((1 << (dim - 1)) * + this->interface_constraints.reinit(GeometryInfo::max_children_per_face * this->n_dofs_per_face(face_no), this->n_dofs_per_face(face_no)); unsigned int target_row = 0; @@ -126,21 +491,14 @@ template std::string FE_RaviartThomasNodal::get_name() const { - // note that the - // FETools::get_fe_by_name - // function depends on the - // particular format of the string - // this function returns, so they - // have to be kept in synch - - // note that this->degree is the maximal - // polynomial degree and is thus one higher - // than the argument given to the - // constructor - std::ostringstream namebuf; - namebuf << "FE_RaviartThomasNodal<" << dim << ">(" << this->degree - 1 << ")"; - - return namebuf.str(); + // note that the FETools::get_fe_by_name function depends on the particular + // format of the string this function returns, so they have to be kept in + // synch + + // note that this->degree is the maximal polynomial degree and is thus one + // higher than the argument given to the constructor + return "FE_RaviartThomasNodal<" + std::to_string(dim) + ">(" + + std::to_string(this->degree - 1) + ")"; } @@ -158,94 +516,6 @@ FE_RaviartThomasNodal::clone() const -template -void -FE_RaviartThomasNodal::initialize_support_points(const unsigned int deg) -{ - // TODO: the implementation makes the assumption that all faces have the - // same number of dofs - AssertDimension(this->n_unique_faces(), 1); - const unsigned int face_no = 0; - - this->generalized_support_points.resize(this->n_dofs_per_cell()); - this->generalized_face_support_points[face_no].resize( - this->n_dofs_per_face(face_no)); - - // Number of the point being entered - unsigned int current = 0; - - // On the faces, we choose as many - // Gauss points as necessary to - // determine the normal component - // uniquely. This is the deg of - // the Raviart-Thomas element plus - // one. - if (dim > 1) - { - QGauss face_points(deg + 1); - Assert(face_points.size() == this->n_dofs_per_face(face_no), - ExcInternalError()); - for (unsigned int k = 0; k < this->n_dofs_per_face(face_no); ++k) - this->generalized_face_support_points[face_no][k] = - face_points.point(k); - Quadrature faces = - QProjector::project_to_all_faces(this->reference_cell(), - face_points); - for (unsigned int k = 0; k < this->n_dofs_per_face(face_no) * - GeometryInfo::faces_per_cell; - ++k) - this->generalized_support_points[k] = faces.point( - k + QProjector::DataSetDescriptor::face(this->reference_cell(), - 0, - true, - false, - false, - this->n_dofs_per_face( - face_no))); - - current = - this->n_dofs_per_face(face_no) * GeometryInfo::faces_per_cell; - } - - if (deg == 0) - return; - // In the interior, we need - // anisotropic Gauss quadratures, - // different for each direction. - QGauss<1> high(deg + 1); - QGauss<1> low(deg); - - for (unsigned int d = 0; d < dim; ++d) - { - std::unique_ptr> quadrature; - switch (dim) - { - case 1: - quadrature = std::make_unique>(high); - break; - case 2: - quadrature = - std::make_unique>(((d == 0) ? low : high), - ((d == 1) ? low : high)); - break; - case 3: - quadrature = - std::make_unique>(((d == 0) ? low : high), - ((d == 1) ? low : high), - ((d == 2) ? low : high)); - break; - default: - Assert(false, ExcNotImplemented()); - } - - for (unsigned int k = 0; k < quadrature->size(); ++k) - this->generalized_support_points[current++] = quadrature->point(k); - } - Assert(current == this->n_dofs_per_cell(), ExcInternalError()); -} - - - template void FE_RaviartThomasNodal< @@ -255,68 +525,56 @@ FE_RaviartThomasNodal< if (dim < 3) return; - // TODO: Implement this for this class - return; -} - - - -template -std::vector -FE_RaviartThomasNodal::get_dpo_vector(const unsigned int deg) -{ - // the element is face-based and we have - // (deg+1)^(dim-1) DoFs per face - unsigned int dofs_per_face = 1; - for (unsigned int d = 1; d < dim; ++d) - dofs_per_face *= deg + 1; - - // and then there are interior dofs - const unsigned int interior_dofs = dim * deg * dofs_per_face; - - std::vector dpo(dim + 1); - dpo[dim - 1] = dofs_per_face; - dpo[dim] = interior_dofs; - - return dpo; -} - - - -template <> -std::vector -FE_RaviartThomasNodal<1>::get_ria_vector(const unsigned int) -{ - Assert(false, ExcImpossibleInDim(1)); - return std::vector(); + const unsigned int n = this->degree; + const unsigned int face_no = 0; + Assert(n * n == this->n_dofs_per_quad(face_no), ExcInternalError()); + for (unsigned int local = 0; local < this->n_dofs_per_quad(face_no); ++local) + // face support points are in lexicographic ordering with x running + // fastest. invert that (y running fastest) + { + unsigned int i = local % n, j = local / n; + + // face_orientation=false, face_flip=false, face_rotation=false + this->adjust_quad_dof_index_for_face_orientation_table[face_no](local, + 0) = + j + i * n - local; + // face_orientation=false, face_flip=false, face_rotation=true + this->adjust_quad_dof_index_for_face_orientation_table[face_no](local, + 1) = + i + (n - 1 - j) * n - local; + // face_orientation=false, face_flip=true, face_rotation=false + this->adjust_quad_dof_index_for_face_orientation_table[face_no](local, + 2) = + (n - 1 - j) + (n - 1 - i) * n - local; + // face_orientation=false, face_flip=true, face_rotation=true + this->adjust_quad_dof_index_for_face_orientation_table[face_no](local, + 3) = + (n - 1 - i) + j * n - local; + // face_orientation=true, face_flip=false, face_rotation=false + this->adjust_quad_dof_index_for_face_orientation_table[face_no](local, + 4) = 0; + // face_orientation=true, face_flip=false, face_rotation=true + this->adjust_quad_dof_index_for_face_orientation_table[face_no](local, + 5) = + j + (n - 1 - i) * n - local; + // face_orientation=true, face_flip=true, face_rotation=false + this->adjust_quad_dof_index_for_face_orientation_table[face_no](local, + 6) = + (n - 1 - i) + (n - 1 - j) * n - local; + // face_orientation=true, face_flip=true, face_rotation=true + this->adjust_quad_dof_index_for_face_orientation_table[face_no](local, + 7) = + (n - 1 - j) + i * n - local; + + // for face_orientation == false, we need to switch the sign + for (unsigned int i = 0; i < 4; ++i) + this->adjust_quad_dof_sign_for_face_orientation_table[face_no](local, + i) = 1; + } } -template -std::vector -FE_RaviartThomasNodal::get_ria_vector(const unsigned int deg) -{ - const unsigned int dofs_per_cell = - PolynomialsRaviartThomas::n_polynomials(deg); - unsigned int dofs_per_face = deg + 1; - for (unsigned int d = 2; d < dim; ++d) - dofs_per_face *= deg + 1; - // all face dofs need to be - // non-additive, since they have - // continuity requirements. - // however, the interior dofs are - // made additive - std::vector ret_val(dofs_per_cell, false); - for (unsigned int i = GeometryInfo::faces_per_cell * dofs_per_face; - i < dofs_per_cell; - ++i) - ret_val[i] = true; - - return ret_val; -} - - template bool FE_RaviartThomasNodal::has_support_on_face( @@ -326,20 +584,16 @@ FE_RaviartThomasNodal::has_support_on_face( AssertIndexRange(shape_index, this->n_dofs_per_cell()); AssertIndexRange(face_index, GeometryInfo::faces_per_cell); - // The first degrees of freedom are - // on the faces and each face has - // degree degrees. - const unsigned int support_face = shape_index / this->degree; + // The first degrees of freedom are on the faces and each face has degree + // degrees. + const unsigned int support_face = shape_index / this->n_dofs_per_face(); - // The only thing we know for sure - // is that shape functions with - // support on one face are zero on - // the opposite face. + // The only thing we know for sure is that shape functions with support on + // one face are zero on the opposite face. if (support_face < GeometryInfo::faces_per_cell) return (face_index != GeometryInfo::opposite_face[support_face]); - // In all other cases, return true, - // which is safe + // In all other cases, return true, which is safe return true; } @@ -361,10 +615,8 @@ FE_RaviartThomasNodal:: ExcDimensionMismatch(support_point_values[0].size(), this->n_components())); - // First do interpolation on - // faces. There, the component - // evaluated depends on the face - // direction and orientation. + // First do interpolation on faces. There, the component evaluated depends + // on the face direction and orientation. unsigned int fbase = 0; unsigned int f = 0; for (; f < GeometryInfo::faces_per_cell; @@ -377,8 +629,7 @@ FE_RaviartThomasNodal:: } } - // The remaining points form dim - // chunks, one for each component. + // The remaining points form dim chunks, one for each component const unsigned int istep = (this->n_dofs_per_cell() - fbase) / dim; Assert((this->n_dofs_per_cell() - fbase) % dim == 0, ExcInternalError()); @@ -416,11 +667,9 @@ std::vector> FE_RaviartThomasNodal::hp_vertex_dof_identities( const FiniteElement &fe_other) const { - // we can presently only compute these - // identities if both FEs are - // FE_RaviartThomasNodals or the other is FE_Nothing. - // In either case, no dofs are assigned on the vertex, - // so we shouldn't be getting here at all. + // we can presently only compute these identities if both FEs are + // FE_RaviartThomasNodals or the other is FE_Nothing. In either case, no + // dofs are assigned on the vertex, so we shouldn't be getting here at all. if (dynamic_cast *>(&fe_other) != nullptr) return std::vector>(); else if (dynamic_cast *>(&fe_other) != nullptr) @@ -439,36 +688,27 @@ std::vector> FE_RaviartThomasNodal::hp_line_dof_identities( const FiniteElement &fe_other) const { - // we can presently only compute - // these identities if both FEs are - // FE_RaviartThomasNodals or if the other - // one is FE_Nothing + // we can presently only compute these identities if both FEs are + // FE_RaviartThomasNodals or if the other one is FE_Nothing if (const FE_RaviartThomasNodal *fe_q_other = dynamic_cast *>(&fe_other)) { - // dofs are located on faces; these are - // only lines in 2d + // dofs are located on faces; these are only lines in 2d if (dim != 2) return std::vector>(); - // dofs are located along lines, so two - // dofs are identical only if in the - // following two cases (remember that - // the face support points are Gauss - // points): + // dofs are located along lines, so two dofs are identical only if in + // the following two cases (remember that the face support points are + // Gauss points): // 1. this->degree = fe_q_other->degree, - // in the case, all the dofs on - // the line are identical + // in the case, all the dofs on the line are identical // 2. this->degree-1 and fe_q_other->degree-1 - // are both even, i.e. this->dof_per_line - // and fe_q_other->dof_per_line are both odd, - // there exists only one point (the middle one) - // such that dofs are identical on this point + // are both even, i.e. this->dof_per_line and fe_q_other->dof_per_line + // are both odd, there exists only one point (the middle one) such + // that dofs are identical on this point // - // to understand this, note that - // this->degree is the *maximal* - // polynomial degree, and is thus one - // higher than the argument given to + // to understand this, note that this->degree is the *maximal* + // polynomial degree, and is thus one higher than the argument given to // the constructor const unsigned int p = this->degree - 1; const unsigned int q = fe_q_other->degree - 1; @@ -504,20 +744,16 @@ FE_RaviartThomasNodal::hp_quad_dof_identities( const FiniteElement &fe_other, const unsigned int face_no) const { - // we can presently only compute - // these identities if both FEs are - // FE_RaviartThomasNodals or if the other - // one is FE_Nothing + // we can presently only compute these identities if both FEs are + // FE_RaviartThomasNodals or if the other one is FE_Nothing if (const FE_RaviartThomasNodal *fe_q_other = dynamic_cast *>(&fe_other)) { - // dofs are located on faces; these are - // only quads in 3d + // dofs are located on faces; these are only quads in 3d if (dim != 3) return std::vector>(); - // this works exactly like the line - // case above + // this works exactly like the line case above const unsigned int p = this->n_dofs_per_quad(face_no); AssertDimension(fe_q_other->n_unique_faces(), 1); @@ -633,44 +869,31 @@ FE_RaviartThomasNodal::get_face_interpolation_matrix( ExcDimensionMismatch(interpolation_matrix.m(), x_source_fe.n_dofs_per_face(face_no))); - // ok, source is a RaviartThomasNodal element, so - // we will be able to do the work + // ok, source is a RaviartThomasNodal element, so we will be able to do the + // work const FE_RaviartThomasNodal &source_fe = dynamic_cast &>(x_source_fe); - // Make sure, that the element, - // for which the DoFs should be - // constrained is the one with - // the higher polynomial degree. - // Actually the procedure will work - // also if this assertion is not - // satisfied. But the matrices - // produced in that case might - // lead to problems in the - // hp-procedures, which use this + // Make sure that the element for which the DoFs should be constrained is + // the one with the higher polynomial degree. Actually the procedure will + // work also if this assertion is not satisfied. But the matrices produced + // in that case might lead to problems in the hp-procedures, which use this // method. Assert(this->n_dofs_per_face(face_no) <= source_fe.n_dofs_per_face(face_no), typename FiniteElement::ExcInterpolationNotImplemented()); - // generate a quadrature - // with the generalized support points. - // This is later based as a - // basis for the QProjector, - // which returns the support - // points on the face. + // generate a quadrature with the generalized support points. This is later + // based as a basis for the QProjector, which returns the support points on + // the face. Quadrature quad_face_support( source_fe.generalized_face_support_points[face_no]); - // Rule of thumb for FP accuracy, - // that can be expected for a - // given polynomial degree. - // This value is used to cut - // off values close to zero. + // Rule of thumb for FP accuracy, that can be expected for a given + // polynomial degree. This value is used to cut off values close to zero. double eps = 2e-13 * this->degree * (dim - 1); - // compute the interpolation - // matrix by simply taking the - // value at the support points. + // compute the interpolation matrix by simply taking the value at the + // support points. const Quadrature face_projection = QProjector::project_to_face(this->reference_cell(), quad_face_support, @@ -685,12 +908,9 @@ FE_RaviartThomasNodal::get_face_interpolation_matrix( double matrix_entry = this->shape_value_component(this->face_to_cell_index(j, 0), p, 0); - // Correct the interpolated - // value. I.e. if it is close - // to 1 or 0, make it exactly - // 1 or 0. Unfortunately, this - // is required to avoid problems - // with higher order elements. + // Correct the interpolated value. I.e. if it is close to 1 or 0, + // make it exactly 1 or 0. Unfortunately, this is required to avoid + // problems with higher order elements. if (std::fabs(matrix_entry - 1.0) < eps) matrix_entry = 1.0; if (std::fabs(matrix_entry) < eps) @@ -700,11 +920,8 @@ FE_RaviartThomasNodal::get_face_interpolation_matrix( } } - // make sure that the row sum of - // each of the matrices is 1 at - // this point. this must be so - // since the shape functions sum up - // to 1 + // make sure that the row sum of each of the matrices is 1 at this + // point. this must be so since the shape functions sum up to 1 for (unsigned int j = 0; j < source_fe.n_dofs_per_face(face_no); ++j) { double sum = 0.; @@ -726,9 +943,8 @@ FE_RaviartThomasNodal::get_subface_interpolation_matrix( FullMatrix & interpolation_matrix, const unsigned int face_no) const { - // this is only implemented, if the - // source FE is also a - // RaviartThomasNodal element + // this is only implemented, if the source FE is also a RaviartThomasNodal + // element AssertThrow((x_source_fe.get_name().find("FE_RaviartThomasNodal<") == 0) || (dynamic_cast *>( &x_source_fe) != nullptr), @@ -741,45 +957,31 @@ FE_RaviartThomasNodal::get_subface_interpolation_matrix( ExcDimensionMismatch(interpolation_matrix.m(), x_source_fe.n_dofs_per_face(face_no))); - // ok, source is a RaviartThomasNodal element, so - // we will be able to do the work + // ok, source is a RaviartThomasNodal element, so we will be able to do the + // work const FE_RaviartThomasNodal &source_fe = dynamic_cast &>(x_source_fe); - // Make sure, that the element, - // for which the DoFs should be - // constrained is the one with - // the higher polynomial degree. - // Actually the procedure will work - // also if this assertion is not - // satisfied. But the matrices - // produced in that case might - // lead to problems in the - // hp-procedures, which use this + // Make sure that the element for which the DoFs should be constrained is + // the one with the higher polynomial degree. Actually the procedure will + // work also if this assertion is not satisfied. But the matrices produced + // in that case might lead to problems in the hp-procedures, which use this // method. Assert(this->n_dofs_per_face(face_no) <= source_fe.n_dofs_per_face(face_no), typename FiniteElement::ExcInterpolationNotImplemented()); - // generate a quadrature - // with the generalized support points. - // This is later based as a - // basis for the QProjector, - // which returns the support - // points on the face. + // generate a quadrature with the generalized support points. This is later + // based as a basis for the QProjector, which returns the support points on + // the face. Quadrature quad_face_support( source_fe.generalized_face_support_points[face_no]); - // Rule of thumb for FP accuracy, - // that can be expected for a - // given polynomial degree. - // This value is used to cut - // off values close to zero. + // Rule of thumb for FP accuracy, that can be expected for a given + // polynomial degree. This value is used to cut off values close to zero. double eps = 2e-13 * this->degree * (dim - 1); - // compute the interpolation - // matrix by simply taking the - // value at the support points. - + // compute the interpolation matrix by simply taking the value at the + // support points. const Quadrature subface_projection = QProjector::project_to_subface(this->reference_cell(), quad_face_support, @@ -795,12 +997,9 @@ FE_RaviartThomasNodal::get_subface_interpolation_matrix( double matrix_entry = this->shape_value_component(this->face_to_cell_index(j, 0), p, 0); - // Correct the interpolated - // value. I.e. if it is close - // to 1 or 0, make it exactly - // 1 or 0. Unfortunately, this - // is required to avoid problems - // with higher order elements. + // Correct the interpolated value. I.e. if it is close to 1 or 0, + // make it exactly 1 or 0. Unfortunately, this is required to avoid + // problems with higher order elements. if (std::fabs(matrix_entry - 1.0) < eps) matrix_entry = 1.0; if (std::fabs(matrix_entry) < eps) @@ -810,11 +1009,8 @@ FE_RaviartThomasNodal::get_subface_interpolation_matrix( } } - // make sure that the row sum of - // each of the matrices is 1 at - // this point. this must be so - // since the shape functions sum up - // to 1 + // make sure that the row sum of each of the matrices is 1 at this + // point. this must be so since the shape functions sum up to 1 for (unsigned int j = 0; j < source_fe.n_dofs_per_face(face_no); ++j) { double sum = 0.; @@ -829,6 +1025,122 @@ FE_RaviartThomasNodal::get_subface_interpolation_matrix( +template +const FullMatrix & +FE_RaviartThomasNodal::get_prolongation_matrix( + const unsigned int child, + const RefinementCase &refinement_case) const +{ + AssertIndexRange(refinement_case, + RefinementCase::isotropic_refinement + 1); + Assert(refinement_case != RefinementCase::no_refinement, + ExcMessage( + "Prolongation matrices are only available for refined cells!")); + AssertIndexRange(child, GeometryInfo::n_children(refinement_case)); + + // initialization upon first request + if (this->prolongation[refinement_case - 1][child].n() == 0) + { + std::lock_guard lock(this->mutex); + + // if matrix got updated while waiting for the lock + if (this->prolongation[refinement_case - 1][child].n() == + this->n_dofs_per_cell()) + return this->prolongation[refinement_case - 1][child]; + + // now do the work. need to get a non-const version of data in order to + // be able to modify them inside a const function + FE_RaviartThomasNodal &this_nonconst = + const_cast &>(*this); + if (refinement_case == RefinementCase::isotropic_refinement) + { + std::vector>> isotropic_matrices( + RefinementCase::isotropic_refinement); + isotropic_matrices.back().resize( + GeometryInfo::n_children(RefinementCase(refinement_case)), + FullMatrix(this->n_dofs_per_cell(), + this->n_dofs_per_cell())); + FETools::compute_embedding_matrices(*this, isotropic_matrices, true); + this_nonconst.prolongation[refinement_case - 1].swap( + isotropic_matrices.back()); + } + else + { + // must compute both restriction and prolongation matrices because + // we only check for their size and the reinit call initializes them + // all + this_nonconst.reinit_restriction_and_prolongation_matrices(); + FETools::compute_embedding_matrices(*this, + this_nonconst.prolongation); + FETools::compute_projection_matrices(*this, + this_nonconst.restriction); + } + } + + // finally return the matrix + return this->prolongation[refinement_case - 1][child]; +} + + + +template +const FullMatrix & +FE_RaviartThomasNodal::get_restriction_matrix( + const unsigned int child, + const RefinementCase &refinement_case) const +{ + AssertIndexRange(refinement_case, + RefinementCase::isotropic_refinement + 1); + Assert(refinement_case != RefinementCase::no_refinement, + ExcMessage( + "Restriction matrices are only available for refined cells!")); + AssertIndexRange(child, GeometryInfo::n_children(refinement_case)); + + // initialization upon first request + if (this->restriction[refinement_case - 1][child].n() == 0) + { + std::lock_guard lock(this->mutex); + + // if matrix got updated while waiting for the lock... + if (this->restriction[refinement_case - 1][child].n() == + this->n_dofs_per_cell()) + return this->restriction[refinement_case - 1][child]; + + // now do the work. need to get a non-const version of data in order to + // be able to modify them inside a const function + FE_RaviartThomasNodal &this_nonconst = + const_cast &>(*this); + if (refinement_case == RefinementCase::isotropic_refinement) + { + std::vector>> isotropic_matrices( + RefinementCase::isotropic_refinement); + isotropic_matrices.back().resize( + GeometryInfo::n_children(RefinementCase(refinement_case)), + FullMatrix(this->n_dofs_per_cell(), + this->n_dofs_per_cell())); + FETools::compute_projection_matrices(*this, isotropic_matrices, true); + this_nonconst.restriction[refinement_case - 1].swap( + isotropic_matrices.back()); + } + else + { + // must compute both restriction and prolongation matrices because + // we only check for their size and the reinit call initializes them + // all + this_nonconst.reinit_restriction_and_prolongation_matrices(); + FETools::compute_embedding_matrices(*this, + this_nonconst.prolongation); + FETools::compute_projection_matrices(*this, + this_nonconst.restriction); + } + } + + // finally return the matrix + return this->restriction[refinement_case - 1][child]; +} + + + // explicit instantiations #include "fe_raviart_thomas_nodal.inst" diff --git a/tests/fe/fe_conformity_dim_3_fe_rt_nodal.cc b/tests/fe/fe_conformity_dim_3_fe_rt_nodal.cc new file mode 100644 index 0000000000..4df987b7eb --- /dev/null +++ b/tests/fe/fe_conformity_dim_3_fe_rt_nodal.cc @@ -0,0 +1,93 @@ +// --------------------------------------------------------------------- +// +// Copyright (C) 1998 - 2021 by the deal.II authors +// +// This file is part of the deal.II library. +// +// The deal.II library is free software; you can use it, redistribute +// it, and/or modify it under the terms of the GNU Lesser General +// Public License as published by the Free Software Foundation; either +// version 2.1 of the License, or (at your option) any later version. +// The full text of the license can be found in the file LICENSE.md at +// the top level directory of deal.II. +// +// --------------------------------------------------------------------- + +#include + +#include "../tests.h" + +// STL +#include +#include + +// My test headers +#include "fe_conformity_test.h" + +#define PRECISION 4 + +int +main(int, char **) +{ + std::ofstream logfile("output"); + dealii::deallog << std::setprecision(PRECISION); + dealii::deallog << std::fixed; + logfile << std::setprecision(PRECISION); + logfile << std::fixed; + dealii::deallog.attach(logfile); + + try + { + using namespace FEConforimityTest; + + constexpr int dim = 3; + + for (unsigned int fe_degree = 0; fe_degree < 3; ++fe_degree) + { + // H(div) conformal + FE_RaviartThomasNodal fe(fe_degree); + + { + for (unsigned int this_switch = 0; this_switch < (dim == 2 ? 4 : 8); + ++this_switch) + { + deallog << std::endl + << "******* degree " << fe_degree + << " ******* orientation case " << this_switch + << " *******" << std::endl; + + FEConformityTest fe_conformity_tester(fe, this_switch); + fe_conformity_tester.run(); + } + } + } // ++fe_degree + } + catch (std::exception &exc) + { + std::cerr << std::endl + << std::endl + << "----------------------------------------------------" + << std::endl; + std::cerr << "Exception on processing: " << std::endl + << exc.what() << std::endl + << "Aborting!" << std::endl + << "----------------------------------------------------" + << std::endl; + + return 1; + } + catch (...) + { + std::cerr << std::endl + << std::endl + << "----------------------------------------------------" + << std::endl; + std::cerr << "Unknown exception!" << std::endl + << "Aborting!" << std::endl + << "----------------------------------------------------" + << std::endl; + return 1; + } + + return 0; +} diff --git a/tests/fe/fe_conformity_dim_3_fe_rt_nodal.output b/tests/fe/fe_conformity_dim_3_fe_rt_nodal.output new file mode 100644 index 0000000000..c8f0cabb38 --- /dev/null +++ b/tests/fe/fe_conformity_dim_3_fe_rt_nodal.output @@ -0,0 +1,577 @@ + +DEAL:: +DEAL::******* degree 0 ******* orientation case 0 ******* +DEAL::Element Info: +DEAL:: name : FE_RaviartThomasNodal<3>(0) +DEAL:: is_primitive : 0 +DEAL:: n_dofs_per_cell : 6 +DEAL:: n_dofs_per_face : 1 +DEAL:: n_dofs_per_quad : 1 +DEAL:: n_dofs_per_line : 0 +DEAL:: n_dofs_per_vertex : 0 +DEAL:: +DEAL:: first_line_index : 0 +DEAL:: first_quad_index : 0 +DEAL:: first_face_line_index: 0 +DEAL:: first_face_quad_index: 0 +DEAL:: +DEAL:: n_components : 3 +DEAL:: n_blocks : 1 +DEAL:: n_base_elements : 1 +DEAL:: +DEAL::Normal jumps (at quad points) in cell 0_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL::Normal jumps (at quad points) in cell 1_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL:: +DEAL::******* degree 0 ******* orientation case 1 ******* +DEAL::Element Info: +DEAL:: name : FE_RaviartThomasNodal<3>(0) +DEAL:: is_primitive : 0 +DEAL:: n_dofs_per_cell : 6 +DEAL:: n_dofs_per_face : 1 +DEAL:: n_dofs_per_quad : 1 +DEAL:: n_dofs_per_line : 0 +DEAL:: n_dofs_per_vertex : 0 +DEAL:: +DEAL:: first_line_index : 0 +DEAL:: first_quad_index : 0 +DEAL:: first_face_line_index: 0 +DEAL:: first_face_quad_index: 0 +DEAL:: +DEAL:: n_components : 3 +DEAL:: n_blocks : 1 +DEAL:: n_base_elements : 1 +DEAL:: +DEAL::Normal jumps (at quad points) in cell 0_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL::Normal jumps (at quad points) in cell 1_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL:: +DEAL::******* degree 0 ******* orientation case 2 ******* +DEAL::Element Info: +DEAL:: name : FE_RaviartThomasNodal<3>(0) +DEAL:: is_primitive : 0 +DEAL:: n_dofs_per_cell : 6 +DEAL:: n_dofs_per_face : 1 +DEAL:: n_dofs_per_quad : 1 +DEAL:: n_dofs_per_line : 0 +DEAL:: n_dofs_per_vertex : 0 +DEAL:: +DEAL:: first_line_index : 0 +DEAL:: first_quad_index : 0 +DEAL:: first_face_line_index: 0 +DEAL:: first_face_quad_index: 0 +DEAL:: +DEAL:: n_components : 3 +DEAL:: n_blocks : 1 +DEAL:: n_base_elements : 1 +DEAL:: +DEAL::Normal jumps (at quad points) in cell 0_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL::Normal jumps (at quad points) in cell 1_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL:: +DEAL::******* degree 0 ******* orientation case 3 ******* +DEAL::Element Info: +DEAL:: name : FE_RaviartThomasNodal<3>(0) +DEAL:: is_primitive : 0 +DEAL:: n_dofs_per_cell : 6 +DEAL:: n_dofs_per_face : 1 +DEAL:: n_dofs_per_quad : 1 +DEAL:: n_dofs_per_line : 0 +DEAL:: n_dofs_per_vertex : 0 +DEAL:: +DEAL:: first_line_index : 0 +DEAL:: first_quad_index : 0 +DEAL:: first_face_line_index: 0 +DEAL:: first_face_quad_index: 0 +DEAL:: +DEAL:: n_components : 3 +DEAL:: n_blocks : 1 +DEAL:: n_base_elements : 1 +DEAL:: +DEAL::Normal jumps (at quad points) in cell 0_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL::Normal jumps (at quad points) in cell 1_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL:: +DEAL::******* degree 0 ******* orientation case 4 ******* +DEAL::Element Info: +DEAL:: name : FE_RaviartThomasNodal<3>(0) +DEAL:: is_primitive : 0 +DEAL:: n_dofs_per_cell : 6 +DEAL:: n_dofs_per_face : 1 +DEAL:: n_dofs_per_quad : 1 +DEAL:: n_dofs_per_line : 0 +DEAL:: n_dofs_per_vertex : 0 +DEAL:: +DEAL:: first_line_index : 0 +DEAL:: first_quad_index : 0 +DEAL:: first_face_line_index: 0 +DEAL:: first_face_quad_index: 0 +DEAL:: +DEAL:: n_components : 3 +DEAL:: n_blocks : 1 +DEAL:: n_base_elements : 1 +DEAL:: +DEAL::Normal jumps (at quad points) in cell 0_0: at face 1 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL::Normal jumps (at quad points) in cell 1_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL:: +DEAL::******* degree 0 ******* orientation case 5 ******* +DEAL::Element Info: +DEAL:: name : FE_RaviartThomasNodal<3>(0) +DEAL:: is_primitive : 0 +DEAL:: n_dofs_per_cell : 6 +DEAL:: n_dofs_per_face : 1 +DEAL:: n_dofs_per_quad : 1 +DEAL:: n_dofs_per_line : 0 +DEAL:: n_dofs_per_vertex : 0 +DEAL:: +DEAL:: first_line_index : 0 +DEAL:: first_quad_index : 0 +DEAL:: first_face_line_index: 0 +DEAL:: first_face_quad_index: 0 +DEAL:: +DEAL:: n_components : 3 +DEAL:: n_blocks : 1 +DEAL:: n_base_elements : 1 +DEAL:: +DEAL::Normal jumps (at quad points) in cell 0_0: at face 1 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL::Normal jumps (at quad points) in cell 1_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL:: +DEAL::******* degree 0 ******* orientation case 6 ******* +DEAL::Element Info: +DEAL:: name : FE_RaviartThomasNodal<3>(0) +DEAL:: is_primitive : 0 +DEAL:: n_dofs_per_cell : 6 +DEAL:: n_dofs_per_face : 1 +DEAL:: n_dofs_per_quad : 1 +DEAL:: n_dofs_per_line : 0 +DEAL:: n_dofs_per_vertex : 0 +DEAL:: +DEAL:: first_line_index : 0 +DEAL:: first_quad_index : 0 +DEAL:: first_face_line_index: 0 +DEAL:: first_face_quad_index: 0 +DEAL:: +DEAL:: n_components : 3 +DEAL:: n_blocks : 1 +DEAL:: n_base_elements : 1 +DEAL:: +DEAL::Normal jumps (at quad points) in cell 0_0: at face 1 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL::Normal jumps (at quad points) in cell 1_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL:: +DEAL::******* degree 0 ******* orientation case 7 ******* +DEAL::Element Info: +DEAL:: name : FE_RaviartThomasNodal<3>(0) +DEAL:: is_primitive : 0 +DEAL:: n_dofs_per_cell : 6 +DEAL:: n_dofs_per_face : 1 +DEAL:: n_dofs_per_quad : 1 +DEAL:: n_dofs_per_line : 0 +DEAL:: n_dofs_per_vertex : 0 +DEAL:: +DEAL:: first_line_index : 0 +DEAL:: first_quad_index : 0 +DEAL:: first_face_line_index: 0 +DEAL:: first_face_quad_index: 0 +DEAL:: +DEAL:: n_components : 3 +DEAL:: n_blocks : 1 +DEAL:: n_base_elements : 1 +DEAL:: +DEAL::Normal jumps (at quad points) in cell 0_0: at face 1 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL::Normal jumps (at quad points) in cell 1_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL:: +DEAL::******* degree 1 ******* orientation case 0 ******* +DEAL::Element Info: +DEAL:: name : FE_RaviartThomasNodal<3>(1) +DEAL:: is_primitive : 0 +DEAL:: n_dofs_per_cell : 36 +DEAL:: n_dofs_per_face : 4 +DEAL:: n_dofs_per_quad : 4 +DEAL:: n_dofs_per_line : 0 +DEAL:: n_dofs_per_vertex : 0 +DEAL:: +DEAL:: first_line_index : 0 +DEAL:: first_quad_index : 0 +DEAL:: first_face_line_index: 0 +DEAL:: first_face_quad_index: 0 +DEAL:: +DEAL:: n_components : 3 +DEAL:: n_blocks : 1 +DEAL:: n_base_elements : 1 +DEAL:: +DEAL::Normal jumps (at quad points) in cell 0_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL::Normal jumps (at quad points) in cell 1_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL:: +DEAL::******* degree 1 ******* orientation case 1 ******* +DEAL::Element Info: +DEAL:: name : FE_RaviartThomasNodal<3>(1) +DEAL:: is_primitive : 0 +DEAL:: n_dofs_per_cell : 36 +DEAL:: n_dofs_per_face : 4 +DEAL:: n_dofs_per_quad : 4 +DEAL:: n_dofs_per_line : 0 +DEAL:: n_dofs_per_vertex : 0 +DEAL:: +DEAL:: first_line_index : 0 +DEAL:: first_quad_index : 0 +DEAL:: first_face_line_index: 0 +DEAL:: first_face_quad_index: 0 +DEAL:: +DEAL:: n_components : 3 +DEAL:: n_blocks : 1 +DEAL:: n_base_elements : 1 +DEAL:: +DEAL::Normal jumps (at quad points) in cell 0_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL::Normal jumps (at quad points) in cell 1_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL:: +DEAL::******* degree 1 ******* orientation case 2 ******* +DEAL::Element Info: +DEAL:: name : FE_RaviartThomasNodal<3>(1) +DEAL:: is_primitive : 0 +DEAL:: n_dofs_per_cell : 36 +DEAL:: n_dofs_per_face : 4 +DEAL:: n_dofs_per_quad : 4 +DEAL:: n_dofs_per_line : 0 +DEAL:: n_dofs_per_vertex : 0 +DEAL:: +DEAL:: first_line_index : 0 +DEAL:: first_quad_index : 0 +DEAL:: first_face_line_index: 0 +DEAL:: first_face_quad_index: 0 +DEAL:: +DEAL:: n_components : 3 +DEAL:: n_blocks : 1 +DEAL:: n_base_elements : 1 +DEAL:: +DEAL::Normal jumps (at quad points) in cell 0_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL::Normal jumps (at quad points) in cell 1_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL:: +DEAL::******* degree 1 ******* orientation case 3 ******* +DEAL::Element Info: +DEAL:: name : FE_RaviartThomasNodal<3>(1) +DEAL:: is_primitive : 0 +DEAL:: n_dofs_per_cell : 36 +DEAL:: n_dofs_per_face : 4 +DEAL:: n_dofs_per_quad : 4 +DEAL:: n_dofs_per_line : 0 +DEAL:: n_dofs_per_vertex : 0 +DEAL:: +DEAL:: first_line_index : 0 +DEAL:: first_quad_index : 0 +DEAL:: first_face_line_index: 0 +DEAL:: first_face_quad_index: 0 +DEAL:: +DEAL:: n_components : 3 +DEAL:: n_blocks : 1 +DEAL:: n_base_elements : 1 +DEAL:: +DEAL::Normal jumps (at quad points) in cell 0_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL::Normal jumps (at quad points) in cell 1_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL:: +DEAL::******* degree 1 ******* orientation case 4 ******* +DEAL::Element Info: +DEAL:: name : FE_RaviartThomasNodal<3>(1) +DEAL:: is_primitive : 0 +DEAL:: n_dofs_per_cell : 36 +DEAL:: n_dofs_per_face : 4 +DEAL:: n_dofs_per_quad : 4 +DEAL:: n_dofs_per_line : 0 +DEAL:: n_dofs_per_vertex : 0 +DEAL:: +DEAL:: first_line_index : 0 +DEAL:: first_quad_index : 0 +DEAL:: first_face_line_index: 0 +DEAL:: first_face_quad_index: 0 +DEAL:: +DEAL:: n_components : 3 +DEAL:: n_blocks : 1 +DEAL:: n_base_elements : 1 +DEAL:: +DEAL::Normal jumps (at quad points) in cell 0_0: at face 1 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL::Normal jumps (at quad points) in cell 1_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL:: +DEAL::******* degree 1 ******* orientation case 5 ******* +DEAL::Element Info: +DEAL:: name : FE_RaviartThomasNodal<3>(1) +DEAL:: is_primitive : 0 +DEAL:: n_dofs_per_cell : 36 +DEAL:: n_dofs_per_face : 4 +DEAL:: n_dofs_per_quad : 4 +DEAL:: n_dofs_per_line : 0 +DEAL:: n_dofs_per_vertex : 0 +DEAL:: +DEAL:: first_line_index : 0 +DEAL:: first_quad_index : 0 +DEAL:: first_face_line_index: 0 +DEAL:: first_face_quad_index: 0 +DEAL:: +DEAL:: n_components : 3 +DEAL:: n_blocks : 1 +DEAL:: n_base_elements : 1 +DEAL:: +DEAL::Normal jumps (at quad points) in cell 0_0: at face 1 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL::Normal jumps (at quad points) in cell 1_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL:: +DEAL::******* degree 1 ******* orientation case 6 ******* +DEAL::Element Info: +DEAL:: name : FE_RaviartThomasNodal<3>(1) +DEAL:: is_primitive : 0 +DEAL:: n_dofs_per_cell : 36 +DEAL:: n_dofs_per_face : 4 +DEAL:: n_dofs_per_quad : 4 +DEAL:: n_dofs_per_line : 0 +DEAL:: n_dofs_per_vertex : 0 +DEAL:: +DEAL:: first_line_index : 0 +DEAL:: first_quad_index : 0 +DEAL:: first_face_line_index: 0 +DEAL:: first_face_quad_index: 0 +DEAL:: +DEAL:: n_components : 3 +DEAL:: n_blocks : 1 +DEAL:: n_base_elements : 1 +DEAL:: +DEAL::Normal jumps (at quad points) in cell 0_0: at face 1 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL::Normal jumps (at quad points) in cell 1_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL:: +DEAL::******* degree 1 ******* orientation case 7 ******* +DEAL::Element Info: +DEAL:: name : FE_RaviartThomasNodal<3>(1) +DEAL:: is_primitive : 0 +DEAL:: n_dofs_per_cell : 36 +DEAL:: n_dofs_per_face : 4 +DEAL:: n_dofs_per_quad : 4 +DEAL:: n_dofs_per_line : 0 +DEAL:: n_dofs_per_vertex : 0 +DEAL:: +DEAL:: first_line_index : 0 +DEAL:: first_quad_index : 0 +DEAL:: first_face_line_index: 0 +DEAL:: first_face_quad_index: 0 +DEAL:: +DEAL:: n_components : 3 +DEAL:: n_blocks : 1 +DEAL:: n_base_elements : 1 +DEAL:: +DEAL::Normal jumps (at quad points) in cell 0_0: at face 1 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL::Normal jumps (at quad points) in cell 1_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL:: +DEAL::******* degree 2 ******* orientation case 0 ******* +DEAL::Element Info: +DEAL:: name : FE_RaviartThomasNodal<3>(2) +DEAL:: is_primitive : 0 +DEAL:: n_dofs_per_cell : 108 +DEAL:: n_dofs_per_face : 9 +DEAL:: n_dofs_per_quad : 9 +DEAL:: n_dofs_per_line : 0 +DEAL:: n_dofs_per_vertex : 0 +DEAL:: +DEAL:: first_line_index : 0 +DEAL:: first_quad_index : 0 +DEAL:: first_face_line_index: 0 +DEAL:: first_face_quad_index: 0 +DEAL:: +DEAL:: n_components : 3 +DEAL:: n_blocks : 1 +DEAL:: n_base_elements : 1 +DEAL:: +DEAL::Normal jumps (at quad points) in cell 0_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL::Normal jumps (at quad points) in cell 1_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL:: +DEAL::******* degree 2 ******* orientation case 1 ******* +DEAL::Element Info: +DEAL:: name : FE_RaviartThomasNodal<3>(2) +DEAL:: is_primitive : 0 +DEAL:: n_dofs_per_cell : 108 +DEAL:: n_dofs_per_face : 9 +DEAL:: n_dofs_per_quad : 9 +DEAL:: n_dofs_per_line : 0 +DEAL:: n_dofs_per_vertex : 0 +DEAL:: +DEAL:: first_line_index : 0 +DEAL:: first_quad_index : 0 +DEAL:: first_face_line_index: 0 +DEAL:: first_face_quad_index: 0 +DEAL:: +DEAL:: n_components : 3 +DEAL:: n_blocks : 1 +DEAL:: n_base_elements : 1 +DEAL:: +DEAL::Normal jumps (at quad points) in cell 0_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL::Normal jumps (at quad points) in cell 1_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL:: +DEAL::******* degree 2 ******* orientation case 2 ******* +DEAL::Element Info: +DEAL:: name : FE_RaviartThomasNodal<3>(2) +DEAL:: is_primitive : 0 +DEAL:: n_dofs_per_cell : 108 +DEAL:: n_dofs_per_face : 9 +DEAL:: n_dofs_per_quad : 9 +DEAL:: n_dofs_per_line : 0 +DEAL:: n_dofs_per_vertex : 0 +DEAL:: +DEAL:: first_line_index : 0 +DEAL:: first_quad_index : 0 +DEAL:: first_face_line_index: 0 +DEAL:: first_face_quad_index: 0 +DEAL:: +DEAL:: n_components : 3 +DEAL:: n_blocks : 1 +DEAL:: n_base_elements : 1 +DEAL:: +DEAL::Normal jumps (at quad points) in cell 0_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL::Normal jumps (at quad points) in cell 1_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL:: +DEAL::******* degree 2 ******* orientation case 3 ******* +DEAL::Element Info: +DEAL:: name : FE_RaviartThomasNodal<3>(2) +DEAL:: is_primitive : 0 +DEAL:: n_dofs_per_cell : 108 +DEAL:: n_dofs_per_face : 9 +DEAL:: n_dofs_per_quad : 9 +DEAL:: n_dofs_per_line : 0 +DEAL:: n_dofs_per_vertex : 0 +DEAL:: +DEAL:: first_line_index : 0 +DEAL:: first_quad_index : 0 +DEAL:: first_face_line_index: 0 +DEAL:: first_face_quad_index: 0 +DEAL:: +DEAL:: n_components : 3 +DEAL:: n_blocks : 1 +DEAL:: n_base_elements : 1 +DEAL:: +DEAL::Normal jumps (at quad points) in cell 0_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL::Normal jumps (at quad points) in cell 1_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL:: +DEAL::******* degree 2 ******* orientation case 4 ******* +DEAL::Element Info: +DEAL:: name : FE_RaviartThomasNodal<3>(2) +DEAL:: is_primitive : 0 +DEAL:: n_dofs_per_cell : 108 +DEAL:: n_dofs_per_face : 9 +DEAL:: n_dofs_per_quad : 9 +DEAL:: n_dofs_per_line : 0 +DEAL:: n_dofs_per_vertex : 0 +DEAL:: +DEAL:: first_line_index : 0 +DEAL:: first_quad_index : 0 +DEAL:: first_face_line_index: 0 +DEAL:: first_face_quad_index: 0 +DEAL:: +DEAL:: n_components : 3 +DEAL:: n_blocks : 1 +DEAL:: n_base_elements : 1 +DEAL:: +DEAL::Normal jumps (at quad points) in cell 0_0: at face 1 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL::Normal jumps (at quad points) in cell 1_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL:: +DEAL::******* degree 2 ******* orientation case 5 ******* +DEAL::Element Info: +DEAL:: name : FE_RaviartThomasNodal<3>(2) +DEAL:: is_primitive : 0 +DEAL:: n_dofs_per_cell : 108 +DEAL:: n_dofs_per_face : 9 +DEAL:: n_dofs_per_quad : 9 +DEAL:: n_dofs_per_line : 0 +DEAL:: n_dofs_per_vertex : 0 +DEAL:: +DEAL:: first_line_index : 0 +DEAL:: first_quad_index : 0 +DEAL:: first_face_line_index: 0 +DEAL:: first_face_quad_index: 0 +DEAL:: +DEAL:: n_components : 3 +DEAL:: n_blocks : 1 +DEAL:: n_base_elements : 1 +DEAL:: +DEAL::Normal jumps (at quad points) in cell 0_0: at face 1 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL::Normal jumps (at quad points) in cell 1_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL:: +DEAL::******* degree 2 ******* orientation case 6 ******* +DEAL::Element Info: +DEAL:: name : FE_RaviartThomasNodal<3>(2) +DEAL:: is_primitive : 0 +DEAL:: n_dofs_per_cell : 108 +DEAL:: n_dofs_per_face : 9 +DEAL:: n_dofs_per_quad : 9 +DEAL:: n_dofs_per_line : 0 +DEAL:: n_dofs_per_vertex : 0 +DEAL:: +DEAL:: first_line_index : 0 +DEAL:: first_quad_index : 0 +DEAL:: first_face_line_index: 0 +DEAL:: first_face_quad_index: 0 +DEAL:: +DEAL:: n_components : 3 +DEAL:: n_blocks : 1 +DEAL:: n_base_elements : 1 +DEAL:: +DEAL::Normal jumps (at quad points) in cell 0_0: at face 1 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL::Normal jumps (at quad points) in cell 1_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL:: +DEAL::******* degree 2 ******* orientation case 7 ******* +DEAL::Element Info: +DEAL:: name : FE_RaviartThomasNodal<3>(2) +DEAL:: is_primitive : 0 +DEAL:: n_dofs_per_cell : 108 +DEAL:: n_dofs_per_face : 9 +DEAL:: n_dofs_per_quad : 9 +DEAL:: n_dofs_per_line : 0 +DEAL:: n_dofs_per_vertex : 0 +DEAL:: +DEAL:: first_line_index : 0 +DEAL:: first_quad_index : 0 +DEAL:: first_face_line_index: 0 +DEAL:: first_face_quad_index: 0 +DEAL:: +DEAL:: n_components : 3 +DEAL:: n_blocks : 1 +DEAL:: n_base_elements : 1 +DEAL:: +DEAL::Normal jumps (at quad points) in cell 0_0: at face 1 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 +DEAL::Normal jumps (at quad points) in cell 1_0: at face 0 +DEAL:: interface jumps: 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000