From: Martin Kronbichler Date: Fri, 30 Sep 2011 19:21:12 +0000 (+0000) Subject: Extend in-code comments. X-Git-Tag: v8.0.0~3325 X-Git-Url: https://gitweb.dealii.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=a3eb6053b0a57c50229176472be57af4a94b575a;p=dealii.git Extend in-code comments. git-svn-id: https://svn.dealii.org/trunk@24491 0785d39b-7218-0410-832d-ea1e28bc413d --- diff --git a/deal.II/examples/step-32/doc/intro.dox b/deal.II/examples/step-32/doc/intro.dox index 7e1e732679..473a30ebf6 100644 --- a/deal.II/examples/step-32/doc/intro.dox +++ b/deal.II/examples/step-32/doc/intro.dox @@ -441,7 +441,7 @@ choose a slightly more readable definition of the viscosity, where the first term gives again the maximum dissipation (similarly to a first order upwind scheme), @f{eqnarray*} - \nu^\mathrm{max}_h|_K = \beta h_K \|\mathrm u\|_{L^\infty}(K)} + \nu^\mathrm{max}_h|_K = \beta h_K \|\mathbf {u}\|_{L^\infty}(K)} @f} and the entropy viscosity is defined as @f{eqnarray*} @@ -457,7 +457,7 @@ with $T_m$ an average temperature (we choose the mean between the maximum and minimum temperature in the computation), which gives the following formula @f{eqnarray*} R_\mathrm{E}(T) = \frac{\partial E(T)}{\partial t} + - (T-T_\mathrm{m}) \left(\mathrm u \cdot \nabla T - \kappa \nabla^2 T - \gamma\right). + (T-T_\mathrm{m}) \left(\mathbf{u} \cdot \nabla T - \kappa \nabla^2 T - \gamma\right). @f} The denominator in the formula for $\nu^\mathrm{E}_h|_K$ is computed as the global deviation of the entropy from the space-averaged entropy $\bar{E}(T) = diff --git a/deal.II/examples/step-32/step-32.cc b/deal.II/examples/step-32/step-32.cc index f06ffd6f4f..905d387f80 100644 --- a/deal.II/examples/step-32/step-32.cc +++ b/deal.II/examples/step-32/step-32.cc @@ -3471,16 +3471,18 @@ namespace Step32 // Stokes solver: A fast solver that sometimes breaks down, and a robust // solver that is slower. This is what we already discussed in the // introduction. Here is how we realize it: First, we perform 30 iterations -// with the solver and the simple preconditioner. If we converge, everything -// is fine. If we do not converge, the solver control will throw an exception +// with the fast solver based on the simple preconditioner based on the AMG +// V-cycle instead of an approximate solve. If we converge, everything is +// fine. If we do not converge, the solver control will throw an exception // @NoConvergence. Usually, this will abort the program, which is certainly -// not what we want. Rather, we want to switch to the strong solver and -// continue the solution. Hence, we catch the exception with the C++ try/catch -// mechanism. Note also how we construct different preconditioners: The fast -// one gives a @p false flag to the BlockSchurPreconditioner class that -// signals that no solve for the velocity-velocity block should be performed -// (but only an AMG V-cycle). The @p true flag for the strong solver signals -// an approximate CG solve, see the definition of the preconditioner above. +// not what we want to happen here. Rather, we want to switch to the strong +// solver and continue the solution process with whatever vector we got so +// far. Hence, we catch the exception with the C++ try/catch mechanism. Note +// also how we construct different preconditioners: The fast one gives a @p +// false flag to the BlockSchurPreconditioner class that signals that no solve +// for the velocity-velocity block should be performed (but only an AMG +// V-cycle). The @p true flag for the strong solver signals an approximate CG +// solve, see the definition of the preconditioner above. template void BoussinesqFlowProblem::solve () { @@ -3657,6 +3659,16 @@ namespace Step32 // @sect4{BoussinesqFlowProblem::output_results} +// Next comes the function that generates the output. The quantities to output +// could be introduced manually like we did in step-31. An alternative is to +// hand this task over to a class PostProcessor that inherits from the class +// DataPostprocessor, which can be attached to DataOut. This allows us to +// output derived quantities from the solution, like the friction heating +// included in this example. It overloads the virtual function @p +// compute_derived_quantities_vector, which is then internally called in +// DataOut. We have to give it values of the numerical solution, its +// derivatives, normals to the cell, the actual evaluation points and any +// additional quantities. template class BoussinesqFlowProblem::Postprocessor : public DataPostprocessor { @@ -3699,6 +3711,16 @@ namespace Step32 {} + // Here we define the names for the variables + // we want to output. These are the actual + // solution values for velocity, pressure, and + // temperature, as well as the friction + // heating and to each cell the number of the + // processor that owns it. This allows us to + // visualize the partitioning of the domain + // among the processors. Except for the + // velocity, which is vector-valued, all other + // quantities are scalar. template std::vector BoussinesqFlowProblem::Postprocessor::get_names() const @@ -3747,6 +3769,19 @@ namespace Step32 } + // Now we implement the function that computes + // the derived quantities. As we also did for + // the output, we rescale the velocity from + // its SI units to something more readable, + // namely cm/year. Next, the pressure is + // scaled to be between 0 and the maximum + // pressure. This makes it more easily + // comparable -- in essence making all + // pressure variables positive or + // zero. Temperature is taken as is, and the + // friction heating is computed as $2 \eta + // \varepsilon(\mathbf{u}) \cdot + // \varepsilon(\mathbf{u})$. template void BoussinesqFlowProblem::Postprocessor:: @@ -3765,20 +3800,16 @@ namespace Step32 for (unsigned int q=0; q grad_u; for (unsigned int d=0; djoint_fe finite -// element, we also add a piecewise -// constant field that denotes the -// subdomain id a cell corresponds -// to. This allows us to visualize -// the partitioning of the domain. As -// a consequence, we also have to -// change the assertion about the -// number of degrees of freedom in -// the joint DoFHandler object (which -// is now equal to the number of -// Stokes degrees of freedom plus the -// temperature degrees of freedom -// plus the number of active cells as -// that is the number of partition -// variables we want to add), and -// adjust the number of elements in -// the arrays we use to name the -// components of the joint solution -// vector and to identify which of -// these components are scalars or -// parts of dim-dimensional vectors. +// into one is the same. There is +// one minor change: we make sure +// that each processor +// only works on the subdomain it owns locally (and not on ghost or artificial +// cells). This we do by adding an additional number to the filename when we +// write the solution. This is not really new, we did it similarly in +// step-40. Note that we write in the compressed format @p .vtu instead of +// plain vtk files, which saves quite some storage. // -// As for scaling: as mentioned in -// the introduction, to keep the -// Stokes equations properly scaled -// and symmetric, we introduced a new -// pressure $\hat p = -// \frac{L}{\eta}p$. What we really -// wanted, however, was the original -// pressure $p$, so while copying -// data from the Stokes DoFHandler -// into the joint one, we undo this -// scaling. While we're at it messing -// with the results of the -// simulation, we do two more things: -// First, the pressure is only -// defined up to a constant. To make -// it more easily comparable, we -// compute the minimal value of the -// pressure computed and shift all -// values up by that amount -- in -// essence making all pressure -// variables positive or -// zero. Secondly, let's also take -// care of the awkward units we use -// for the velocity: it is computed -// in SI units of meters per second, -// which of course is a very small -// number in the earth mantle. We -// therefore rescale things into -// centimeters per year, the unit -// commonly used in geophysics. +// All the rest is done in the PostProcessor class. template void BoussinesqFlowProblem::output_results () { @@ -3944,6 +3925,9 @@ namespace Step32 std::ofstream output (filename.c_str()); data_out.write_vtu (output); + // Eventually, we create a master file on the + // zeroth processor that describes how the + // subdomains are defining the global mesh. if (Utilities::MPI::this_mpi_process(MPI_COMM_WORLD) == 0) { std::vector filenames; @@ -3986,84 +3970,28 @@ namespace Step32 // easily identify which of the two // is more expensive. // -// One thing of note, however, is -// that we don't want to compute all -// error indicators on all cells, of -// course. Rather, it would be nice -// if each processor could only -// compute the error indicators for -// those cells it actually -// owns. However, in order for mesh -// refinement to proceed in the same -// way on all processors, all -// processors would have to exchange -// their refinement indicators. We do -// so in two steps: first, we call -// the KellyErrorEstimator::estimate -// function with an argument (usually -// defaulted, but explicitly given -// here) thatindicates the subdomain -// id of all those cells that we want -// to work on; note that this means -// that we also have to specify -// values for all those default -// arguments that lie before the one -// we want to give. +// One thing of note, however, is that we don't want to compute all error +// indicators only on the locally owned subdomain. In order to achieve this, +// we pass one additional argument to the KellyErrorEstimator. Note that the +// vector for error estimates is resized to the number of active cells present +// on the current process, which is less than the total number of degrees of +// freedom on all processors; each processor only has a few coarse cells +// around the locally owned ones, as also explained in step-40. // -// Secondly, we need to exchange the -// data. To do this, we could add up -// the refinement indicators from all -// processors, since they all only -// worked on a disjoint subset of the -// elements of the vector that holds -// these indicators. We could set up -// a distributed Trilinos vector for -// this, but that appears -// unnecessarily complicated because -// we would have to specify a -// partition of this vector, and none -// appears immediately -// obvious. Rather, we want to use -// the Trilinos communicator class to -// this for us, taking the local -// indicators as a collection of -// floating point values rather than -// a linear algebra -// vector. Unfortunately, the -// Trilinos communicator class -// doesn't appear to have function -// that wraps around the MPI add -// function; it has one that computes -// the maximum of a bunch of values, -// though, which in our case is -// equally good -- maybe even better, -// in case two processors should -// compute values for the same cell -// (which they shouldn't of course, -// unless we have made a mistake in -// specifying the arguments to the -// estimate function below). There is -// little snag again, however, that -// makes this a bit awkward: the -// Trilinos communicator class can -// take the maximum over all -// processors for each element of a -// vector, but only if the vector -// contains doubles. The vector -// returned by the -// KellyErrorEstimator::estimate -// function, on the other hand, has -// floats as its data type. An ugly, -// if workable way, is therefore to -// compute the indicators as floats, -// convert the vector to doubles, and -// form the maximum of that. +// The local error estimates are then handed to a %parallel version of +// GridRefinement which evaluates the errors and finds the cells that need +// refinement. As in step-31, we want to limit the maximum grid level. So in +// case some cells have been marked that are already at the finest level, we +// simply clear the refine flags. // -// At the end of this chain of -// events, every processors has the -// complete set of refinement -// indicators, and the rest of the -// function proceeds as before. +// With all that at hand, we set up the parallel SolutionTransfer to transfer +// the solutions for the current time level and the next older one. The syntax +// is similar to the non-%parallel solution transfer (with the exception that +// here a pointer to the vector entries is enough), and SolutionTransfer will +// already upon call to prepare_for_coarsening_and_refinement attach the data +// to the cell information. This makes sure that the solution data eventually +// arrives at the processor that will own the cell after repartitioning of the +// domain with new cells. template void BoussinesqFlowProblem::refine_mesh (const unsigned int max_grid_level) { @@ -4085,7 +4013,6 @@ namespace Step32 estimated_error_per_cell, 0.3, 0.1); - // limit maximum refinement level if (triangulation.n_levels() > max_grid_level) for (typename Triangulation::active_cell_iterator cell = triangulation.begin_active(max_grid_level); @@ -4151,15 +4078,11 @@ namespace Step32 // @sect4{BoussinesqFlowProblem::run} -// This is the final function in this -// class. It actually runs the program. It -// is, once more, very similar to -// step-31. The only thing that really -// changed is that we use the -// project_temperature_field() -// function instead of the library function -// VectorTools::project, the -// rest is as before. +// This is the final function in this class. It actually runs the program. It +// is, once more, very similar to step-31. We use a different mesh now (@p +// hyper_shell instead of a simple cube geometry), and use the +// project_temperature_field() function instead of the library +// function VectorTools::project, the rest is as before. template void BoussinesqFlowProblem::run () { @@ -4227,13 +4150,26 @@ namespace Step32 time += time_step; ++timestep_number; - // if we are at the end of - // time, stop now + // In order to speed up linear + // solvers, we extrapolate the + // solutions from the old time levels + // to the new one. This gives a very + // good initial guess, cutting the + // number of iterations needed in + // solvers by more than one half. We + // do not need to extrapolate in the + // last iteration, so if we reached + // the final time, we stop where. + // + // As last thing during a time step, + // we check whether the current time + // step number is divisible by 100, + // which is when we let the computing + // timer print a summary of times it + // spent up to that point. if (time > parameters.end_time * EquationData::year_in_seconds) break; - // otherwise prepare for the - // next time step TrilinosWrappers::MPI::BlockVector old_old_stokes_solution; old_old_stokes_solution = old_stokes_solution; old_stokes_solution = stokes_solution; @@ -4248,15 +4184,12 @@ namespace Step32 old_old_temperature_solution); } - // every 100 time steps output - // a summary of the current - // timing information if (timestep_number % 100 == 0) computing_timer.print_summary (); } while (true); - // if we are generating graphical + // If we are generating graphical // output, do so also for the last // time step unless we had just // done so before we left the @@ -4272,7 +4205,12 @@ namespace Step32 // @sect3{The main function} -// This is copied verbatim from step-31: +// The main function is short as usual and very similar to the one in +// step-31. Since we use a parameter file which is specified as an argument in +// the command line, we have to read it in here and pass it on to the +// Parameters class for parsing. If no filename is given in the command line, +// we simply use the step-32.prm file which is distributed together with the +// program. int main (int argc, char *argv[]) { using namespace Step32;