From: young Date: Thu, 16 Aug 2012 20:50:18 +0000 (+0000) Subject: Kill configure support for PETSc < 3.0 and update the readmes. X-Git-Url: https://gitweb.dealii.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=caa734eedeea186a1fceb07d077ab40db4582c32;p=dealii-svn.git Kill configure support for PETSc < 3.0 and update the readmes. git-svn-id: https://svn.dealii.org/trunk@25997 0785d39b-7218-0410-832d-ea1e28bc413d --- diff --git a/deal.II/aclocal.m4 b/deal.II/aclocal.m4 index 7e4a6f2227..17ceee0dd0 100644 --- a/deal.II/aclocal.m4 +++ b/deal.II/aclocal.m4 @@ -6071,12 +6071,6 @@ AC_DEFUN(DEAL_II_CONFIGURE_PETSC_ARCH, dnl dnl from time-to-time; so make sure that what was specified is dnl actually correct. case "${DEAL_II_PETSC_VERSION_MAJOR}.${DEAL_II_PETSC_VERSION_MINOR}.${DEAL_II_PETSC_VERSION_SUBMINOR}" in - 2.3*) dnl - if test ! -d $DEAL_II_PETSC_DIR/lib/$DEAL_II_PETSC_ARCH \ - ; then - AC_MSG_ERROR([PETSc has not been compiled for the architecture specified with --with-petsc-arch]) - fi - ;; 3.*) dnl if test ! -d $DEAL_II_PETSC_DIR/$DEAL_II_PETSC_ARCH/lib \ ; then @@ -6152,18 +6146,6 @@ AC_DEFUN(DEAL_II_CHECK_PETSC_MPI_CONSISTENCY, dnl dnl dnl Like always, we have to cake care of version control! case "${DEAL_II_PETSC_VERSION_MAJOR}.${DEAL_II_PETSC_VERSION_MINOR}.${DEAL_II_PETSC_VERSION_SUBMINOR}" in - 2.3.*) dnl - AC_TRY_COMPILE( - [#include "$DEAL_II_PETSC_DIR/bmake/$DEAL_II_PETSC_ARCH/petscconf.h" - ], - [#ifdef PETSC_HAVE_MPIUNI - compile error; - #endif - ], - [AC_MSG_RESULT(yes)], - [AC_MSG_ERROR([PETSc was not built for MPI, but deal.II is!] - )]) - ;; 3.*) dnl AC_TRY_COMPILE( [#include "$DEAL_II_PETSC_DIR/$DEAL_II_PETSC_ARCH/include/petscconf.h" @@ -6182,18 +6164,6 @@ AC_DEFUN(DEAL_II_CHECK_PETSC_MPI_CONSISTENCY, dnl esac else case "${DEAL_II_PETSC_VERSION_MAJOR}.${DEAL_II_PETSC_VERSION_MINOR}.${DEAL_II_PETSC_VERSION_SUBMINOR}" in - 2.3*) dnl - AC_TRY_COMPILE( - [#include "$DEAL_II_PETSC_DIR/bmake/$DEAL_II_PETSC_ARCH/petscconf.h" - ], - [#ifndef PETSC_HAVE_MPIUNI - compile error; - #endif - ], - [AC_MSG_RESULT(yes)], - [AC_MSG_ERROR([PETSc was built for MPI, but deal.II is not!] - )]) - ;; 3.*) dnl AC_TRY_COMPILE( [#include "$DEAL_II_PETSC_DIR/$DEAL_II_PETSC_ARCH/include/petscconf.h" @@ -6226,11 +6196,6 @@ AC_DEFUN(DEAL_II_CONFIGURE_PETSC_MPIUNI_LIB, dnl [ AC_MSG_CHECKING([for PETSc libmpiuni library]) case "${DEAL_II_PETSC_VERSION_MAJOR}.${DEAL_II_PETSC_VERSION_MINOR}.${DEAL_II_PETSC_VERSION_SUBMINOR}" in - 2.3*) dnl - if test -f $DEAL_II_PETSC_DIR/lib/$DEAL_II_PETSC_ARCH/libmpiuni.a ; then - DEAL_II_PETSC_MPIUNI_LIB="$DEAL_II_PETSC_DIR/lib/$DEAL_II_PETSC_ARCH/libmpiuni.a" - fi - ;; 3.*) dnl if test -f $DEAL_II_PETSC_DIR/$DEAL_II_PETSC_ARCH/lib/libmpiuni.a ; then DEAL_II_PETSC_MPIUNI_LIB="$DEAL_II_PETSC_DIR/$DEAL_II_PETSC_ARCH/lib/libmpiuni.a" @@ -6262,7 +6227,7 @@ dnl ------------------------------------------------------------ AC_DEFUN(DEAL_II_CONFIGURE_PETSC_COMPLEX, dnl [ case "${DEAL_II_PETSC_VERSION_MAJOR}.${DEAL_II_PETSC_VERSION_MINOR}.${DEAL_II_PETSC_VERSION_SUBMINOR}" in - 3.1*) + 3.3*) AC_MSG_CHECKING([for PETSc scalar complex]) DEAL_II_PETSC_COMPLEX=`cat $DEAL_II_PETSC_DIR/$DEAL_II_PETSC_ARCH/include/petscconf.h \ | grep "#define PETSC_USE_COMPLEX" \ diff --git a/deal.II/configure b/deal.II/configure index 6ffff9ca1d..8409e4b887 100755 --- a/deal.II/configure +++ b/deal.II/configure @@ -1,14 +1,14 @@ #! /bin/sh # From configure.in Revision: 25932 . # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.65 for deal.II 7.2.pre. +# Generated by GNU Autoconf 2.68 for deal.II 7.2.pre. # # Report bugs to . # # # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. +# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software +# Foundation, Inc. # # # This configure script is free software; the Free Software Foundation @@ -92,6 +92,7 @@ fi IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. +as_myself= case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -217,11 +218,18 @@ IFS=$as_save_IFS # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. + # Preserve -v and -x to the replacement shell. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV export CONFIG_SHELL - exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} + case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; + esac + exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"} fi if test x$as_have_required = xno; then : @@ -320,7 +328,7 @@ $as_echo X"$as_dir" | test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p @@ -360,19 +368,19 @@ else fi # as_fn_arith -# as_fn_error ERROR [LINENO LOG_FD] -# --------------------------------- +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with status $?, using 1 if that was 0. +# script with STATUS, using 1 if that was 0. as_fn_error () { - as_status=$?; test $as_status -eq 0 && as_status=1 - if test "$3"; then - as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3 + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi - $as_echo "$as_me: error: $1" >&2 + $as_echo "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error @@ -534,7 +542,7 @@ test -n "$DJDIR" || exec 7<&0 &1 # Name of the host. -# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` @@ -879,8 +887,9 @@ do fi case $ac_option in - *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; - *) ac_optarg=yes ;; + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. @@ -925,7 +934,7 @@ do ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error "invalid feature name: $ac_useropt" + as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -951,7 +960,7 @@ do ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error "invalid feature name: $ac_useropt" + as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -1155,7 +1164,7 @@ do ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error "invalid package name: $ac_useropt" + as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -1171,7 +1180,7 @@ do ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error "invalid package name: $ac_useropt" + as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -1201,8 +1210,8 @@ do | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; - -*) as_fn_error "unrecognized option: \`$ac_option' -Try \`$0 --help' for more information." + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" ;; *=*) @@ -1210,7 +1219,7 @@ Try \`$0 --help' for more information." # Reject names that are not valid shell variable names. case $ac_envvar in #( '' | [0-9]* | *[!_$as_cr_alnum]* ) - as_fn_error "invalid variable name: \`$ac_envvar'" ;; + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; esac eval $ac_envvar=\$ac_optarg export $ac_envvar ;; @@ -1220,7 +1229,7 @@ Try \`$0 --help' for more information." $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} + : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" ;; esac @@ -1228,13 +1237,13 @@ done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` - as_fn_error "missing argument to $ac_option" + as_fn_error $? "missing argument to $ac_option" fi if test -n "$ac_unrecognized_opts"; then case $enable_option_checking in no) ;; - fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac fi @@ -1257,7 +1266,7 @@ do [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac - as_fn_error "expected an absolute directory name for --$ac_var: $ac_val" + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" done # There might be people who depend on the old broken behavior: `$host' @@ -1271,8 +1280,8 @@ target=$target_alias if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe - $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used." >&2 + $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used" >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi @@ -1287,9 +1296,9 @@ test "$silent" = yes && exec 6>/dev/null ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - as_fn_error "working directory cannot be determined" + as_fn_error $? "working directory cannot be determined" test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - as_fn_error "pwd does not report name of working directory" + as_fn_error $? "pwd does not report name of working directory" # Find the source files, if location was not specified. @@ -1328,11 +1337,11 @@ else fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - as_fn_error "cannot find sources ($ac_unique_file) in $srcdir" + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg" + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then @@ -1372,7 +1381,7 @@ Configuration: --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking...' messages + -q, --quiet, --silent do not print \`checking ...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files @@ -1635,9 +1644,9 @@ test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF deal.II configure 7.2.pre -generated by GNU Autoconf 2.65 +generated by GNU Autoconf 2.68 -Copyright (C) 2009 Free Software Foundation, Inc. +Copyright (C) 2010 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF @@ -1681,7 +1690,7 @@ sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi - eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_compile @@ -1719,7 +1728,7 @@ sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi - eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_cxx_try_compile @@ -1765,7 +1774,7 @@ fi # interfere with the next link command; also delete a directory that is # left behind by Apple's compiler. We do this before executing the actions. rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_cxx_try_link @@ -1807,7 +1816,7 @@ sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=$ac_status fi rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_cxx_try_run @@ -1820,7 +1829,7 @@ ac_fn_cxx_check_func () as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } -if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : +if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext @@ -1875,7 +1884,7 @@ fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } - eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_cxx_check_func @@ -1888,7 +1897,7 @@ ac_fn_cxx_check_header_compile () as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } -if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : +if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext @@ -1906,7 +1915,7 @@ fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } - eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_cxx_check_header_compile @@ -1931,7 +1940,7 @@ $as_echo "$ac_try_echo"; } >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } >/dev/null && { + test $ac_status = 0; } > conftest.i && { test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || test ! -s conftest.err }; then : @@ -1942,7 +1951,7 @@ sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi - eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_cxx_try_cpp @@ -1955,10 +1964,10 @@ fi ac_fn_cxx_check_header_mongrel () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : + if eval \${$3+:} false; then : { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } -if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : +if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 fi eval ac_res=\$$3 @@ -1994,7 +2003,7 @@ if ac_fn_cxx_try_cpp "$LINENO"; then : else ac_header_preproc=no fi -rm -f conftest.err conftest.$ac_ext +rm -f conftest.err conftest.i conftest.$ac_ext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } @@ -2017,17 +2026,15 @@ $as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} $as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} -( cat <<\_ASBOX -## -------------------------------- ## +( $as_echo "## -------------------------------- ## ## Report this to dealii@dealii.org ## -## -------------------------------- ## -_ASBOX +## -------------------------------- ##" ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } -if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : +if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else eval "$3=\$ac_header_compiler" @@ -2036,7 +2043,7 @@ eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } fi - eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_cxx_check_header_mongrel cat >config.log <<_ACEOF @@ -2044,7 +2051,7 @@ This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by deal.II $as_me 7.2.pre, which was -generated by GNU Autoconf 2.65. Invocation command line was +generated by GNU Autoconf 2.68. Invocation command line was $ $0 $@ @@ -2154,11 +2161,9 @@ trap 'exit_status=$? { echo - cat <<\_ASBOX -## ---------------- ## + $as_echo "## ---------------- ## ## Cache variables. ## -## ---------------- ## -_ASBOX +## ---------------- ##" echo # The following way of writing the cache mishandles newlines in values, ( @@ -2192,11 +2197,9 @@ $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; ) echo - cat <<\_ASBOX -## ----------------- ## + $as_echo "## ----------------- ## ## Output variables. ## -## ----------------- ## -_ASBOX +## ----------------- ##" echo for ac_var in $ac_subst_vars do @@ -2209,11 +2212,9 @@ _ASBOX echo if test -n "$ac_subst_files"; then - cat <<\_ASBOX -## ------------------- ## + $as_echo "## ------------------- ## ## File substitutions. ## -## ------------------- ## -_ASBOX +## ------------------- ##" echo for ac_var in $ac_subst_files do @@ -2227,11 +2228,9 @@ _ASBOX fi if test -s confdefs.h; then - cat <<\_ASBOX -## ----------- ## + $as_echo "## ----------- ## ## confdefs.h. ## -## ----------- ## -_ASBOX +## ----------- ##" echo cat confdefs.h echo @@ -2286,7 +2285,12 @@ _ACEOF ac_site_file1=NONE ac_site_file2=NONE if test -n "$CONFIG_SITE"; then - ac_site_file1=$CONFIG_SITE + # We do not want a PATH search for config.site. + case $CONFIG_SITE in #(( + -*) ac_site_file1=./$CONFIG_SITE;; + */*) ac_site_file1=$CONFIG_SITE;; + *) ac_site_file1=./$CONFIG_SITE;; + esac elif test "x$prefix" != xNONE; then ac_site_file1=$prefix/share/config.site ac_site_file2=$prefix/etc/config.site @@ -2301,7 +2305,11 @@ do { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 $as_echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" + . "$ac_site_file" \ + || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See \`config.log' for more details" "$LINENO" 5; } fi done @@ -2365,7 +2373,7 @@ if $ac_cache_corrupted; then $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} - as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 + as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 fi ## -------------------- ## ## Main body of script. ## @@ -2388,16 +2396,22 @@ ac_config_headers="$ac_config_headers include/deal.II/base/config.h" ac_aux_dir= for ac_dir in contrib/config "$srcdir"/contrib/config; do - for ac_t in install-sh install.sh shtool; do - if test -f "$ac_dir/$ac_t"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/$ac_t -c" - break 2 - fi - done + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi done if test -z "$ac_aux_dir"; then - as_fn_error "cannot find install-sh, install.sh, or shtool in contrib/config \"$srcdir\"/contrib/config" "$LINENO" 5 + as_fn_error $? "cannot find install-sh, install.sh, or shtool in contrib/config \"$srcdir\"/contrib/config" "$LINENO" 5 fi # These three variables are undocumented and unsupported, @@ -2446,27 +2460,27 @@ DEAL2_DIR="$DEAL_II_PATH" # Make sure we can run config.sub. $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || - as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 + as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 $as_echo_n "checking build system type... " >&6; } -if test "${ac_cv_build+set}" = set; then : +if ${ac_cv_build+:} false; then : $as_echo_n "(cached) " >&6 else ac_build_alias=$build_alias test "x$ac_build_alias" = x && ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` test "x$ac_build_alias" = x && - as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5 + as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || - as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 $as_echo "$ac_cv_build" >&6; } case $ac_cv_build in *-*-*) ;; -*) as_fn_error "invalid value of canonical build" "$LINENO" 5;; +*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; esac build=$ac_cv_build ac_save_IFS=$IFS; IFS='-' @@ -2484,14 +2498,14 @@ case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 $as_echo_n "checking host system type... " >&6; } -if test "${ac_cv_host+set}" = set; then : +if ${ac_cv_host+:} false; then : $as_echo_n "(cached) " >&6 else if test "x$host_alias" = x; then ac_cv_host=$ac_cv_build else ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || - as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 fi fi @@ -2499,7 +2513,7 @@ fi $as_echo "$ac_cv_host" >&6; } case $ac_cv_host in *-*-*) ;; -*) as_fn_error "invalid value of canonical host" "$LINENO" 5;; +*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; esac host=$ac_cv_host ac_save_IFS=$IFS; IFS='-' @@ -2517,14 +2531,14 @@ case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5 $as_echo_n "checking target system type... " >&6; } -if test "${ac_cv_target+set}" = set; then : +if ${ac_cv_target+:} false; then : $as_echo_n "(cached) " >&6 else if test "x$target_alias" = x; then ac_cv_target=$ac_cv_host else ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` || - as_fn_error "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5 + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5 fi fi @@ -2532,7 +2546,7 @@ fi $as_echo "$ac_cv_target" >&6; } case $ac_cv_target in *-*-*) ;; -*) as_fn_error "invalid value of canonical target" "$LINENO" 5;; +*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5;; esac target=$ac_cv_target ac_save_IFS=$IFS; IFS='-' @@ -2589,7 +2603,7 @@ do set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CXX+set}" = set; then : +if ${ac_cv_prog_CXX+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CXX"; then @@ -2628,7 +2642,7 @@ done { $as_echo "$as_me:${as_lineno-$LINENO}: checking for MPI C++ compiler" >&5 $as_echo_n "checking for MPI C++ compiler... " >&6; } if test "x$CXX" = "x" ; then - as_fn_error "none found" "$LINENO" 5 + as_fn_error $? "none found" "$LINENO" 5 else { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5 $as_echo "$CXX" >&6; } @@ -2643,7 +2657,7 @@ $as_echo_n "checking for MPI C compiler... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: mpicc" >&5 $as_echo "mpicc" >&6; } else - as_fn_error "no MPI C compiler found" "$LINENO" 5 + as_fn_error $? "no MPI C compiler found" "$LINENO" 5 fi fi @@ -2665,7 +2679,7 @@ if test -n "$ac_tool_prefix"; then set dummy ${ac_tool_prefix}gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CC+set}" = set; then : +if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then @@ -2705,7 +2719,7 @@ if test -z "$ac_cv_prog_CC"; then set dummy gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : +if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then @@ -2758,7 +2772,7 @@ if test -z "$CC"; then set dummy ${ac_tool_prefix}cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CC+set}" = set; then : +if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then @@ -2798,7 +2812,7 @@ if test -z "$CC"; then set dummy cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CC+set}" = set; then : +if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then @@ -2857,7 +2871,7 @@ if test -z "$CC"; then set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CC+set}" = set; then : +if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then @@ -2901,7 +2915,7 @@ do set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : +if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then @@ -2955,8 +2969,8 @@ fi test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error "no acceptable C compiler found in \$PATH -See \`config.log' for more details." "$LINENO" 5; } +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5; } # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 @@ -3070,9 +3084,8 @@ sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ as_fn_set_status 77 -as_fn_error "C compiler cannot create executables -See \`config.log' for more details." "$LINENO" 5; }; } +as_fn_error 77 "C compiler cannot create executables +See \`config.log' for more details" "$LINENO" 5; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } @@ -3114,8 +3127,8 @@ done else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error "cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." "$LINENO" 5; } +as_fn_error $? "cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details" "$LINENO" 5; } fi rm -f conftest conftest$ac_cv_exeext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 @@ -3172,9 +3185,9 @@ $as_echo "$ac_try_echo"; } >&5 else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error "cannot run C compiled programs. +as_fn_error $? "cannot run C compiled programs. If you meant to cross compile, use \`--host'. -See \`config.log' for more details." "$LINENO" 5; } +See \`config.log' for more details" "$LINENO" 5; } fi fi fi @@ -3185,7 +3198,7 @@ rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out ac_clean_files=$ac_clean_files_save { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 $as_echo_n "checking for suffix of object files... " >&6; } -if test "${ac_cv_objext+set}" = set; then : +if ${ac_cv_objext+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext @@ -3225,8 +3238,8 @@ sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error "cannot compute suffix of object files: cannot compile -See \`config.log' for more details." "$LINENO" 5; } +as_fn_error $? "cannot compute suffix of object files: cannot compile +See \`config.log' for more details" "$LINENO" 5; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi @@ -3236,7 +3249,7 @@ OBJEXT=$ac_cv_objext ac_objext=$OBJEXT { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if test "${ac_cv_c_compiler_gnu+set}" = set; then : +if ${ac_cv_c_compiler_gnu+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext @@ -3273,7 +3286,7 @@ ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } -if test "${ac_cv_prog_cc_g+set}" = set; then : +if ${ac_cv_prog_cc_g+:} false; then : $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag @@ -3351,7 +3364,7 @@ else fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if test "${ac_cv_prog_cc_c89+set}" = set; then : +if ${ac_cv_prog_cc_c89+:} false; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no @@ -3464,7 +3477,7 @@ CFLAGS="$OLDCFLAGS" set dummy $testprog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_CC+set}" = set; then : +if ${ac_cv_path_CC+:} false; then : $as_echo_n "(cached) " >&6 else case $CC in @@ -3520,7 +3533,7 @@ if test -z "$CXX"; then set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CXX+set}" = set; then : +if ${ac_cv_prog_CXX+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CXX"; then @@ -3564,7 +3577,7 @@ do set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then : +if ${ac_cv_prog_ac_ct_CXX+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CXX"; then @@ -3642,7 +3655,7 @@ done { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5 $as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; } -if test "${ac_cv_cxx_compiler_gnu+set}" = set; then : +if ${ac_cv_cxx_compiler_gnu+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext @@ -3679,7 +3692,7 @@ ac_test_CXXFLAGS=${CXXFLAGS+set} ac_save_CXXFLAGS=$CXXFLAGS { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5 $as_echo_n "checking whether $CXX accepts -g... " >&6; } -if test "${ac_cv_prog_cxx_g+set}" = set; then : +if ${ac_cv_prog_cxx_g+:} false; then : $as_echo_n "(cached) " >&6 else ac_save_cxx_werror_flag=$ac_cxx_werror_flag @@ -3779,7 +3792,7 @@ CXXFLAGS="$OLDCXXFLAGS" set dummy $testprog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_CXX+set}" = set; then : +if ${ac_cv_path_CXX+:} false; then : $as_echo_n "(cached) " >&6 else case $CXX in @@ -3870,14 +3883,14 @@ $as_echo "C++ compiler is IBM xlC" >&6; } *7.0* | *7.1* | *7.2* | *7.3*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: C++ compiler is $mips_pro" >&5 $as_echo "C++ compiler is $mips_pro" >&6; } - as_fn_error "This compiler is not supported" "$LINENO" 5 + as_fn_error $? "This compiler is not supported" "$LINENO" 5 GXX_VERSION=MIPSpro7.3 GXX_VERSION_DETAILED="$GXX_VERSION" ;; *7.4) { $as_echo "$as_me:${as_lineno-$LINENO}: result: C++ compiler is MIPSpro compiler 7.4" >&5 $as_echo "C++ compiler is MIPSpro compiler 7.4" >&6; } - as_fn_error "This compiler is not supported. Use MIPSPro compiler 7.4x" "$LINENO" 5 + as_fn_error $? "This compiler is not supported. Use MIPSPro compiler 7.4x" "$LINENO" 5 GXX_VERSION=MIPSpro7.4 GXX_VERSION_DETAILED="$GXX_VERSION" ;; @@ -4323,8 +4336,8 @@ $as_echo_n "checking whether std::thread actually works... " >&6; } if test "$cross_compiling" = yes; then : { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error "cannot run test program while cross compiling -See \`config.log' for more details." "$LINENO" 5; } +as_fn_error $? "cannot run test program while cross compiling +See \`config.log' for more details" "$LINENO" 5; } else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ @@ -5097,8 +5110,8 @@ $as_echo_n "checking whether std::thread actually works... " >&6; } if test "$cross_compiling" = yes; then : { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error "cannot run test program while cross compiling -See \`config.log' for more details." "$LINENO" 5; } +as_fn_error $? "cannot run test program while cross compiling +See \`config.log' for more details" "$LINENO" 5; } else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ @@ -5368,9 +5381,8 @@ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext CXXFLAGSO="$CXXFLAGSO -q -O2" CXXFLAGSPIC="" LDFLAGSPIC="" - { as_fn_set_status please remove this message from aclocal.m4 and call autoconf and configure. If you do not understand this -as_fn_error "Attention! deal.II is not known to work with Borland C++! - If you intend to port it to Borland C++" "$LINENO" 5; } + as_fn_error please remove this message from aclocal.m4 and call autoconf and configure. If you do not understand this "Attention! deal.II is not known to work with Borland C++! + If you intend to port it to Borland C++" "$LINENO" 5 ;; pathscale_cc) @@ -5533,13 +5545,13 @@ $as_echo "C compiler is IBM xlC" >&6; } *7.0* | *7.1* | *7.2* | *7.3*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: C compiler is $mips_pro" >&5 $as_echo "C compiler is $mips_pro" >&6; } - as_fn_error "This compiler is not supported" "$LINENO" 5 + as_fn_error $? "This compiler is not supported" "$LINENO" 5 CC_VERSION=MIPSpro7.3 ;; *7.4) { $as_echo "$as_me:${as_lineno-$LINENO}: result: C compiler is MIPSpro compiler 7.4" >&5 $as_echo "C compiler is MIPSpro compiler 7.4" >&6; } - as_fn_error "This compiler is not supported. Use MIPSPro compiler 7.4x" "$LINENO" 5 + as_fn_error $? "This compiler is not supported. Use MIPSPro compiler 7.4x" "$LINENO" 5 CC_VERSION=MIPSpro7.4 ;; *7.41* | *7.42* | *7.43* | *7.44*) @@ -5857,7 +5869,7 @@ fi if test "$enablethreads" = yes ; then case "$target" in *cygwin* ) - as_fn_error "Multithreading is not supported on CygWin" "$LINENO" 5 + as_fn_error $? "Multithreading is not supported on CygWin" "$LINENO" 5 ;; esac @@ -5906,7 +5918,7 @@ ac_compiler_gnu=$ac_cv_cxx_compiler_gnu if test "$thread_flag" = invalid_last_entry ; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: no flag found!" >&5 $as_echo "no flag found!" >&6; } - as_fn_error "Could not determine multithreading flag for this platform. Aborting!" "$LINENO" 5 + as_fn_error $? "Could not determine multithreading flag for this platform. Aborting!" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: -$thread_flag" >&5 $as_echo "-$thread_flag" >&6; } @@ -5988,7 +6000,7 @@ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ;; *) - as_fn_error "No threading compiler options for this C++ compiler specified at present" "$LINENO" 5 + as_fn_error $? "No threading compiler options for this C++ compiler specified at present" "$LINENO" 5 exit 1 ;; esac @@ -6028,7 +6040,7 @@ $as_echo "ok" >&6; } else - as_fn_error "not found" "$LINENO" 5 + as_fn_error $? "not found" "$LINENO" 5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext @@ -6067,7 +6079,7 @@ $as_echo "ok" >&6; } else - as_fn_error "not found" "$LINENO" 5 + as_fn_error $? "not found" "$LINENO" 5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext @@ -6109,7 +6121,7 @@ $as_echo "ok" >&6; } else - as_fn_error "not found" "$LINENO" 5 + as_fn_error $? "not found" "$LINENO" 5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext @@ -8472,8 +8484,8 @@ $as_echo_n "checking for minimal std::vector capacity... " >&6; } if test "$cross_compiling" = yes; then : { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error "cannot run test program while cross compiling -See \`config.log' for more details." "$LINENO" 5; } +as_fn_error $? "cannot run test program while cross compiling +See \`config.log' for more details" "$LINENO" 5; } else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ @@ -8489,7 +8501,7 @@ int main () { _ACEOF if ac_fn_cxx_try_run "$LINENO"; then : - as_fn_error "impossible result -- aborting" "$LINENO" 5 + as_fn_error $? "impossible result -- aborting" "$LINENO" 5 else @@ -8514,8 +8526,8 @@ $as_echo_n "checking for minimal std::vector capacity... " >&6; } if test "$cross_compiling" = yes; then : { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error "cannot run test program while cross compiling -See \`config.log' for more details." "$LINENO" 5; } +as_fn_error $? "cannot run test program while cross compiling +See \`config.log' for more details" "$LINENO" 5; } else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ @@ -8531,7 +8543,7 @@ int main () { _ACEOF if ac_fn_cxx_try_run "$LINENO"; then : - as_fn_error "impossible result -- aborting" "$LINENO" 5 + as_fn_error $? "impossible result -- aborting" "$LINENO" 5 else @@ -9076,8 +9088,7 @@ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext do : as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` ac_fn_cxx_check_func "$LINENO" "$ac_func" "$as_ac_var" -eval as_val=\$$as_ac_var - if test "x$as_val" = x""yes; then : +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF @@ -9098,7 +9109,7 @@ ac_compiler_gnu=$ac_cv_cxx_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5 $as_echo_n "checking how to run the C++ preprocessor... " >&6; } if test -z "$CXXCPP"; then - if test "${ac_cv_prog_CXXCPP+set}" = set; then : + if ${ac_cv_prog_CXXCPP+:} false; then : $as_echo_n "(cached) " >&6 else # Double quotes because CXXCPP needs to be expanded @@ -9128,7 +9139,7 @@ else # Broken: fails on valid input. continue fi -rm -f conftest.err conftest.$ac_ext +rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. @@ -9144,11 +9155,11 @@ else ac_preproc_ok=: break fi -rm -f conftest.err conftest.$ac_ext +rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext +rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : break fi @@ -9187,7 +9198,7 @@ else # Broken: fails on valid input. continue fi -rm -f conftest.err conftest.$ac_ext +rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. @@ -9203,18 +9214,18 @@ else ac_preproc_ok=: break fi -rm -f conftest.err conftest.$ac_ext +rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext +rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error "C++ preprocessor \"$CXXCPP\" fails sanity check -See \`config.log' for more details." "$LINENO" 5; } +as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check +See \`config.log' for more details" "$LINENO" 5; } fi ac_ext=cpp @@ -9226,7 +9237,7 @@ ac_compiler_gnu=$ac_cv_cxx_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 $as_echo_n "checking for grep that handles long lines and -e... " >&6; } -if test "${ac_cv_path_GREP+set}" = set; then : +if ${ac_cv_path_GREP+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$GREP"; then @@ -9275,7 +9286,7 @@ esac done IFS=$as_save_IFS if test -z "$ac_cv_path_GREP"; then - as_fn_error "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_GREP=$GREP @@ -9289,7 +9300,7 @@ $as_echo "$ac_cv_path_GREP" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 $as_echo_n "checking for egrep... " >&6; } -if test "${ac_cv_path_EGREP+set}" = set; then : +if ${ac_cv_path_EGREP+:} false; then : $as_echo_n "(cached) " >&6 else if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 @@ -9341,7 +9352,7 @@ esac done IFS=$as_save_IFS if test -z "$ac_cv_path_EGREP"; then - as_fn_error "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_EGREP=$EGREP @@ -9356,7 +9367,7 @@ $as_echo "$ac_cv_path_EGREP" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } -if test "${ac_cv_header_stdc+set}" = set; then : +if ${ac_cv_header_stdc+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext @@ -9473,8 +9484,7 @@ do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_cxx_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default " -eval as_val=\$$as_ac_Header - if test "x$as_val" = x""yes; then : +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF @@ -9492,8 +9502,7 @@ do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_cxx_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default " -eval as_val=\$$as_ac_Header - if test "x$as_val" = x""yes; then : +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF @@ -9511,7 +9520,7 @@ done for ac_func in times do : ac_fn_cxx_check_func "$LINENO" "times" "ac_cv_func_times" -if test "x$ac_cv_func_times" = x""yes; then : +if test "x$ac_cv_func_times" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_TIMES 1 _ACEOF @@ -9532,8 +9541,8 @@ ac_compiler_gnu=$ac_cv_cxx_compiler_gnu if test "$cross_compiling" = yes; then : { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error "cannot run test program while cross compiling -See \`config.log' for more details." "$LINENO" 5; } +as_fn_error $? "cannot run test program while cross compiling +See \`config.log' for more details" "$LINENO" 5; } else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ @@ -9589,7 +9598,7 @@ if test "x$F77" = "x" ; then set dummy gfortran f77 g77; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_F77+set}" = set; then : +if ${ac_cv_path_F77+:} false; then : $as_echo_n "(cached) " >&6 else case $F77 in @@ -9630,7 +9639,7 @@ else set dummy $F77; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_F77+set}" = set; then : +if ${ac_cv_path_F77+:} false; then : $as_echo_n "(cached) " >&6 else case $F77 in @@ -9759,7 +9768,7 @@ $as_echo "F77 compiler is unknown. no flags set!" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for e_wsfe in -lg2c" >&5 $as_echo_n "checking for e_wsfe in -lg2c... " >&6; } -if test "${ac_cv_lib_g2c_e_wsfe+set}" = set; then : +if ${ac_cv_lib_g2c_e_wsfe+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS @@ -9793,14 +9802,14 @@ LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_g2c_e_wsfe" >&5 $as_echo "$ac_cv_lib_g2c_e_wsfe" >&6; } -if test "x$ac_cv_lib_g2c_e_wsfe" = x""yes; then : +if test "x$ac_cv_lib_g2c_e_wsfe" = xyes; then : F77LIBS="$F77LIBS -lg2c" fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _gfortran_allocate in -lgfortran" >&5 $as_echo_n "checking for _gfortran_allocate in -lgfortran... " >&6; } -if test "${ac_cv_lib_gfortran__gfortran_allocate+set}" = set; then : +if ${ac_cv_lib_gfortran__gfortran_allocate+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS @@ -9834,13 +9843,13 @@ LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_gfortran__gfortran_allocate" >&5 $as_echo "$ac_cv_lib_gfortran__gfortran_allocate" >&6; } -if test "x$ac_cv_lib_gfortran__gfortran_allocate" = x""yes; then : +if test "x$ac_cv_lib_gfortran__gfortran_allocate" = xyes; then : found=1 fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _gfortran_st_write_done in -lgfortran" >&5 $as_echo_n "checking for _gfortran_st_write_done in -lgfortran... " >&6; } -if test "${ac_cv_lib_gfortran__gfortran_st_write_done+set}" = set; then : +if ${ac_cv_lib_gfortran__gfortran_st_write_done+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS @@ -9874,7 +9883,7 @@ LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_gfortran__gfortran_st_write_done" >&5 $as_echo "$ac_cv_lib_gfortran__gfortran_st_write_done" >&6; } -if test "x$ac_cv_lib_gfortran__gfortran_st_write_done" = x""yes; then : +if test "x$ac_cv_lib_gfortran__gfortran_st_write_done" = xyes; then : found=1 fi @@ -9924,7 +9933,7 @@ $as_echo "Unknown FORTRAN compiler has been disabled!" >&6; } ;; *) - as_fn_error "No compiler options for F77 compiler \"$F77_VERSION\" specified: modification of aclocal.m4 necessary" "$LINENO" 5 + as_fn_error $? "No compiler options for F77 compiler \"$F77_VERSION\" specified: modification of aclocal.m4 necessary" "$LINENO" 5 ;; esac @@ -10146,7 +10155,7 @@ rm -f core conftest.err conftest.$ac_objext \ set dummy ar; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_AR+set}" = set; then : +if ${ac_cv_prog_AR+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$AR"; then @@ -10183,7 +10192,7 @@ fi set dummy $AR; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_AR+set}" = set; then : +if ${ac_cv_path_AR+:} false; then : $as_echo_n "(cached) " >&6 else case $AR in @@ -10224,7 +10233,7 @@ if test -n "$ac_tool_prefix"; then set dummy ${ac_tool_prefix}ranlib; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_RANLIB+set}" = set; then : +if ${ac_cv_prog_RANLIB+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$RANLIB"; then @@ -10264,7 +10273,7 @@ if test -z "$ac_cv_prog_RANLIB"; then set dummy ranlib; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then : +if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_RANLIB"; then @@ -10316,7 +10325,7 @@ if test "$RANLIB" != ":" ; then set dummy $RANLIB; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_RANLIB+set}" = set; then : +if ${ac_cv_path_RANLIB+:} false; then : $as_echo_n "(cached) " >&6 else case $RANLIB in @@ -10415,7 +10424,7 @@ fi $as_echo "Disabling backward compatibility feature: \"$i\"" >&6; } ;; *) - as_fn_error "Backward compatibility feature \"$i\" unknown" "$LINENO" 5 + as_fn_error $? "Backward compatibility feature \"$i\" unknown" "$LINENO" 5 ;; esac done @@ -10438,7 +10447,7 @@ _ACEOF ;; *) - as_fn_error "Backward compatibility feature \"$i\" unknown" "$LINENO" 5 + as_fn_error $? "Backward compatibility feature \"$i\" unknown" "$LINENO" 5 ;; esac done @@ -10482,26 +10491,26 @@ fi LDFLAGS="$BOOST_LIB_DIR $LDFLAGS" ac_fn_cxx_check_header_mongrel "$LINENO" "boost/shared_ptr.hpp" "ac_cv_header_boost_shared_ptr_hpp" "$ac_includes_default" -if test "x$ac_cv_header_boost_shared_ptr_hpp" = x""yes; then : +if test "x$ac_cv_header_boost_shared_ptr_hpp" = xyes; then : else - as_fn_error "Your boost installation is incomplete!" "$LINENO" 5 + as_fn_error $? "Your boost installation is incomplete!" "$LINENO" 5 fi ac_fn_cxx_check_header_mongrel "$LINENO" "boost/type_traits.hpp" "ac_cv_header_boost_type_traits_hpp" "$ac_includes_default" -if test "x$ac_cv_header_boost_type_traits_hpp" = x""yes; then : +if test "x$ac_cv_header_boost_type_traits_hpp" = xyes; then : else - as_fn_error "Your boost installation is incomplete!" "$LINENO" 5 + as_fn_error $? "Your boost installation is incomplete!" "$LINENO" 5 fi ac_fn_cxx_check_header_mongrel "$LINENO" "boost/tuple/tuple.hpp" "ac_cv_header_boost_tuple_tuple_hpp" "$ac_includes_default" -if test "x$ac_cv_header_boost_tuple_tuple_hpp" = x""yes; then : +if test "x$ac_cv_header_boost_tuple_tuple_hpp" = xyes; then : else - as_fn_error "Your boost installation is incomplete!" "$LINENO" 5 + as_fn_error $? "Your boost installation is incomplete!" "$LINENO" 5 fi @@ -10678,7 +10687,7 @@ $as_echo "$DEAL_II_PETSC_DIR" >&6; } if test ! -d $DEAL_II_PETSC_DIR/include \ ; then - as_fn_error "Path to PETSc specified with --with-petsc does not point to a complete PETSc installation" "$LINENO" 5 + as_fn_error $? "Path to PETSc specified with --with-petsc does not point to a complete PETSc installation" "$LINENO" 5 fi fi @@ -10692,7 +10701,7 @@ $as_echo "$DEAL_II_PETSC_DIR" >&6; } if test ! -d $DEAL_II_PETSC_DIR/include \ ; then - as_fn_error "The path to PETSc specified in the PETSC_DIR environment variable does not point to a complete PETSc installation" "$LINENO" 5 + as_fn_error $? "The path to PETSc specified in the PETSC_DIR environment variable does not point to a complete PETSc installation" "$LINENO" 5 fi else USE_CONTRIB_PETSC=no @@ -10763,7 +10772,7 @@ else { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DEAL_II_PETSC_ARCH" >&5 $as_echo "$DEAL_II_PETSC_ARCH" >&6; } else - as_fn_error "If PETSc is used, you must specify the architecture either through the PETSC_ARCH environment variable, or through the --with-petsc-arch flag" "$LINENO" 5 + as_fn_error $? "If PETSc is used, you must specify the architecture either through the PETSC_ARCH environment variable, or through the --with-petsc-arch flag" "$LINENO" 5 fi fi @@ -10772,17 +10781,12 @@ fi if test "x$PETSC_ARCH" != "x" ; then case "${DEAL_II_PETSC_VERSION_MAJOR}.${DEAL_II_PETSC_VERSION_MINOR}.${DEAL_II_PETSC_VERSION_SUBMINOR}" in - 2.3*) if test ! -d $DEAL_II_PETSC_DIR/lib/$DEAL_II_PETSC_ARCH \ - ; then - as_fn_error "PETSc has not been compiled for the architecture specified with --with-petsc-arch" "$LINENO" 5 - fi - ;; 3.*) if test ! -d $DEAL_II_PETSC_DIR/$DEAL_II_PETSC_ARCH/lib \ ; then - as_fn_error "PETSc has not been compiled for the architecture specified with --with-petsc-arch" "$LINENO" 5 + as_fn_error $? "PETSc has not been compiled for the architecture specified with --with-petsc-arch" "$LINENO" 5 fi ;; - *) as_fn_error "Unknown PETSc version ${DEAL_II_PETSC_VERSION_MAJOR}.${DEAL_II_PETSC_VERSION_MINOR}.${DEAL_II_PETSC_VERSION_SUBMINOR}" "$LINENO" 5 + *) as_fn_error $? "Unknown PETSc version ${DEAL_II_PETSC_VERSION_MAJOR}.${DEAL_II_PETSC_VERSION_MINOR}.${DEAL_II_PETSC_VERSION_SUBMINOR}" "$LINENO" 5 ;; esac fi @@ -10792,15 +10796,11 @@ fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for PETSc libmpiuni library" >&5 $as_echo_n "checking for PETSc libmpiuni library... " >&6; } case "${DEAL_II_PETSC_VERSION_MAJOR}.${DEAL_II_PETSC_VERSION_MINOR}.${DEAL_II_PETSC_VERSION_SUBMINOR}" in - 2.3*) if test -f $DEAL_II_PETSC_DIR/lib/$DEAL_II_PETSC_ARCH/libmpiuni.a ; then - DEAL_II_PETSC_MPIUNI_LIB="$DEAL_II_PETSC_DIR/lib/$DEAL_II_PETSC_ARCH/libmpiuni.a" - fi - ;; 3.*) if test -f $DEAL_II_PETSC_DIR/$DEAL_II_PETSC_ARCH/lib/libmpiuni.a ; then DEAL_II_PETSC_MPIUNI_LIB="$DEAL_II_PETSC_DIR/$DEAL_II_PETSC_ARCH/lib/libmpiuni.a" fi ;; - *) as_fn_error "Unknown PETSc version ${DEAL_II_PETSC_VERSION_MAJOR}.${DEAL_II_PETSC_VERSION_MINOR}.${DEAL_II_PETSC_VERSION_SUBMINOR}" "$LINENO" 5 + *) as_fn_error $? "Unknown PETSc version ${DEAL_II_PETSC_VERSION_MAJOR}.${DEAL_II_PETSC_VERSION_MINOR}.${DEAL_II_PETSC_VERSION_SUBMINOR}" "$LINENO" 5 ;; esac @@ -10819,30 +10819,6 @@ $as_echo_n "checking for consistency of PETSc and deal.II MPI settings... " >&6; if test "x$DEAL_II_USE_MPI" = "xyes" ; then case "${DEAL_II_PETSC_VERSION_MAJOR}.${DEAL_II_PETSC_VERSION_MINOR}.${DEAL_II_PETSC_VERSION_SUBMINOR}" in - 2.3.*) cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include "$DEAL_II_PETSC_DIR/bmake/$DEAL_II_PETSC_ARCH/petscconf.h" - -int -main () -{ -#ifdef PETSC_HAVE_MPIUNI - compile error; - #endif - - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -else - as_fn_error "PETSc was not built for MPI, but deal.II is! - " "$LINENO" 5 -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ;; 3.*) cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include "$DEAL_II_PETSC_DIR/$DEAL_II_PETSC_ARCH/include/petscconf.h" @@ -10862,40 +10838,16 @@ if ac_fn_cxx_try_compile "$LINENO"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else - as_fn_error "PETSc was not built for MPI, but deal.II is! + as_fn_error $? "PETSc was not built for MPI, but deal.II is! " "$LINENO" 5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ;; - *) as_fn_error "Unknown PETSc version ${DEAL_II_PETSC_VERSION_MAJOR}.${DEAL_II_PETSC_VERSION_MINOR}.${DEAL_II_PETSC_VERSION_SUBMINOR}" "$LINENO" 5 + *) as_fn_error $? "Unknown PETSc version ${DEAL_II_PETSC_VERSION_MAJOR}.${DEAL_II_PETSC_VERSION_MINOR}.${DEAL_II_PETSC_VERSION_SUBMINOR}" "$LINENO" 5 ;; esac else case "${DEAL_II_PETSC_VERSION_MAJOR}.${DEAL_II_PETSC_VERSION_MINOR}.${DEAL_II_PETSC_VERSION_SUBMINOR}" in - 2.3*) cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include "$DEAL_II_PETSC_DIR/bmake/$DEAL_II_PETSC_ARCH/petscconf.h" - -int -main () -{ -#ifndef PETSC_HAVE_MPIUNI - compile error; - #endif - - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -else - as_fn_error "PETSc was built for MPI, but deal.II is not! - " "$LINENO" 5 -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ;; 3.*) cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include "$DEAL_II_PETSC_DIR/$DEAL_II_PETSC_ARCH/include/petscconf.h" @@ -10914,19 +10866,19 @@ if ac_fn_cxx_try_compile "$LINENO"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else - as_fn_error "PETSc was built for MPI, but deal.II is not!" "$LINENO" 5 + as_fn_error $? "PETSc was built for MPI, but deal.II is not!" "$LINENO" 5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ;; - *) as_fn_error "Unknown PETSc version ${DEAL_II_PETSC_VERSION_MAJOR}.${DEAL_II_PETSC_VERSION_MINOR}.${DEAL_II_PETSC_VERSION_SUBMINOR}" "$LINENO" 5 + *) as_fn_error $? "Unknown PETSc version ${DEAL_II_PETSC_VERSION_MAJOR}.${DEAL_II_PETSC_VERSION_MINOR}.${DEAL_II_PETSC_VERSION_SUBMINOR}" "$LINENO" 5 ;; esac fi case "${DEAL_II_PETSC_VERSION_MAJOR}.${DEAL_II_PETSC_VERSION_MINOR}.${DEAL_II_PETSC_VERSION_SUBMINOR}" in - 3.1*) + 3.3*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for PETSc scalar complex" >&5 $as_echo_n "checking for PETSc scalar complex... " >&6; } DEAL_II_PETSC_COMPLEX=`cat $DEAL_II_PETSC_DIR/$DEAL_II_PETSC_ARCH/include/petscconf.h \ @@ -10994,13 +10946,13 @@ $as_echo "$DEAL_II_SLEPC_DIR" >&6; } if test ! -d $DEAL_II_SLEPC_DIR \ -o ! -d $DEAL_II_SLEPC_DIR/include \ ; then - as_fn_error "Path to SLEPc specified with --with-slepc does not point to a complete SLEPc installation" "$LINENO" 5 + as_fn_error $? "Path to SLEPc specified with --with-slepc does not point to a complete SLEPc installation" "$LINENO" 5 fi if test ! -d $DEAL_II_SLEPC_DIR/$DEAL_II_PETSC_ARCH \ -o ! -d $DEAL_II_SLEPC_DIR/$DEAL_II_PETSC_ARCH/lib \ ; then - as_fn_error "SLEPc has not been compiled for the PETSc architecture" "$LINENO" 5 + as_fn_error $? "SLEPc has not been compiled for the PETSc architecture" "$LINENO" 5 fi fi @@ -11014,7 +10966,7 @@ $as_echo "$DEAL_II_SLEPC_DIR" >&6; } if test ! -d $DEAL_II_SLEPC_DIR \ -o ! -d $DEAL_II_SLEPC_DIR/include \ ; then - as_fn_error "The path to SLEPc specified in the SLEPC_DIR environment variable does not point to a complete SLEPc installation" "$LINENO" 5 + as_fn_error $? "The path to SLEPc specified in the SLEPC_DIR environment variable does not point to a complete SLEPc installation" "$LINENO" 5 fi else USE_CONTRIB_SLEPC=no @@ -11064,7 +11016,7 @@ $as_echo "$SLEPC_VERSION" >&6; } if test "${PETSC_VERSION}" != "${SLEPC_VERSION}" \ -o "${PETSC_RELEASE}" != "${SLEPC_RELEASE}" \ ; then - as_fn_error "If SLEPc is used, you must use the same version number as your PETSc Installation" "$LINENO" 5 + as_fn_error $? "If SLEPc is used, you must use the same version number as your PETSc Installation" "$LINENO" 5 fi @@ -11099,7 +11051,7 @@ $as_echo "$DEAL_II_TRILINOS_DIR" >&6; } if test ! -d $DEAL_II_TRILINOS_DIR/include \ -o ! -d $DEAL_II_TRILINOS_DIR/lib ; then - as_fn_error "Path to Trilinos specified with --with-trilinos does not point to a complete Trilinos installation" "$LINENO" 5 + as_fn_error $? "Path to Trilinos specified with --with-trilinos does not point to a complete Trilinos installation" "$LINENO" 5 fi DEAL_II_TRILINOS_INCDIR="$DEAL_II_TRILINOS_DIR/include" @@ -11121,7 +11073,7 @@ $as_echo "$DEAL_II_TRILINOS_DIR" >&6; } if test ! -d $DEAL_II_TRILINOS_DIR/include \ -o ! -d $DEAL_II_TRILINOS_DIR/lib ; then - as_fn_error "The path to Trilinos specified in the TRILINOS_DIR environment variable does not point to a complete Trilinos installation" "$LINENO" 5 + as_fn_error $? "The path to Trilinos specified in the TRILINOS_DIR environment variable does not point to a complete Trilinos installation" "$LINENO" 5 fi DEAL_II_TRILINOS_INCDIR="$DEAL_II_TRILINOS_DIR/include" DEAL_II_TRILINOS_LIBDIR="$DEAL_II_TRILINOS_DIR/lib" @@ -11154,7 +11106,7 @@ $as_echo "explicitly disabled" >&6; } $as_echo "$DEAL_II_TRILINOS_INCDIR" >&6; } if test ! -d $DEAL_II_TRILINOS_INCDIR ; then - as_fn_error "Path to Trilinos specified with --with-trilinos-include does not point to a complete Trilinos installation" "$LINENO" 5 + as_fn_error $? "Path to Trilinos specified with --with-trilinos-include does not point to a complete Trilinos installation" "$LINENO" 5 fi fi @@ -11167,7 +11119,7 @@ else $as_echo "$DEAL_II_TRILINOS_INCDIR" >&6; } if test ! -d $DEAL_II_TRILINOS_INCDIR ; then - as_fn_error "The path to Trilinos includes specified in the TRILINOS_INCDIR environment variable does not point to a valid directory" "$LINENO" 5 + as_fn_error $? "The path to Trilinos includes specified in the TRILINOS_INCDIR environment variable does not point to a valid directory" "$LINENO" 5 fi else if test "x${USE_CONTRIB_TRILINOS}" != "xyes" ; then @@ -11202,7 +11154,7 @@ $as_echo "explicitly disabled" >&6; } $as_echo "$DEAL_II_TRILINOS_LIBDIR" >&6; } if test ! -d $DEAL_II_TRILINOS_LIBDIR ; then - as_fn_error "Path to Trilinos libraries with --with-trilinos-libs does not point to a valid directory" "$LINENO" 5 + as_fn_error $? "Path to Trilinos libraries with --with-trilinos-libs does not point to a valid directory" "$LINENO" 5 fi fi @@ -11215,7 +11167,7 @@ else $as_echo "$DEAL_II_TRILINOS_LIBDIR" >&6; } if test ! -d $DEAL_II_TRILINOS_LIBDIR ; then - as_fn_error "The path to Trilinos specified in the TRILINOS_LIBDIR environment variable does not point to a complete Trilinos installation" "$LINENO" 5 + as_fn_error $? "The path to Trilinos specified in the TRILINOS_LIBDIR environment variable does not point to a complete Trilinos installation" "$LINENO" 5 fi else if test "x${USE_CONTRIB_TRILINOS}" != "xyes" ; then @@ -11257,17 +11209,17 @@ $as_echo_n "checking for Trilinos version... " >&6; } $as_echo "$DEAL_II_TRILINOS_VERSION_MAJOR.$DEAL_II_TRILINOS_VERSION_MINOR.$DEAL_II_TRILINOS_VERSION_SUBMINOR" >&6; } if test "$DEAL_II_TRILINOS_VERSION_MAJOR" -lt 10 ; then - as_fn_error "Trilinos versions prior to 10.0 are no longer supported with deal.II." "$LINENO" 5 + as_fn_error $? "Trilinos versions prior to 10.0 are no longer supported with deal.II." "$LINENO" 5 fi if test "$DEAL_II_TRILINOS_VERSION_MAJOR" = 10 -a "$DEAL_II_TRILINOS_VERSION_MINOR" = 6 ; then - as_fn_error "Trilinos versions 10.6.x have bugs that make it incompatible + as_fn_error $? "Trilinos versions 10.6.x have bugs that make it incompatible with deal.II. Please use versions before 10.6 or after 10.8.1." "$LINENO" 5 fi if test "$DEAL_II_TRILINOS_VERSION_MAJOR" = 10 \ -a "$DEAL_II_TRILINOS_VERSION_MINOR" = 8 \ -a "$DEAL_II_TRILINOS_VERSION_SUBMINOR" -lt 2 ; then - as_fn_error "Trilinos versions 10.8.0 and 10.8.1 have bugs that make it incompatible + as_fn_error $? "Trilinos versions 10.8.0 and 10.8.1 have bugs that make it incompatible with deal.II. Please use versions before 10.6 or after 10.8.1." "$LINENO" 5 fi @@ -11332,7 +11284,7 @@ $as_echo "yes" >&6; } else - as_fn_error "Trilinos was not built for MPI, but deal.II is!" "$LINENO" 5 + as_fn_error $? "Trilinos was not built for MPI, but deal.II is!" "$LINENO" 5 exit 1; fi @@ -11362,7 +11314,7 @@ $as_echo "yes" >&6; } else - as_fn_error "Trilinos was built for MPI, but deal.II is not!" "$LINENO" 5 + as_fn_error $? "Trilinos was built for MPI, but deal.II is not!" "$LINENO" 5 exit 1; fi @@ -11406,16 +11358,16 @@ $as_echo "no" >&6; } fi if test "x${DEAL_II_TRILINOS_SHARED}${DEAL_II_TRILINOS_STATIC}" = "x" ; then - as_fn_error "Unable to determine whether Trilinos uses shared or static libraries." "$LINENO" 5 + as_fn_error $? "Unable to determine whether Trilinos uses shared or static libraries." "$LINENO" 5 fi if test "x$enableshared" = "xyes" -a "x$DEAL_II_TRILINOS_SHARED" != "xyes" ; then - as_fn_error "When building deal.II with shared libraries, Trilinos also needs to be built with shared libraries" "$LINENO" 5 + as_fn_error $? "When building deal.II with shared libraries, Trilinos also needs to be built with shared libraries" "$LINENO" 5 fi if test "x$enableshared" = "xno" -a "x$DEAL_II_TRILINOS_STATIC" != "xyes" ; then - as_fn_error "When building deal.II with shared libraries, Trilinos also needs to be built with shared libraries" "$LINENO" 5 + as_fn_error $? "When building deal.II with shared libraries, Trilinos also needs to be built with shared libraries" "$LINENO" 5 fi if test "x$enableshared" = "xyes" ; then @@ -11445,7 +11397,7 @@ $as_echo_n "checking for the set of Trilinos libraries... " >&6; } $DEAL_II_TRILINOS_VERSION_MINOR -lt 4 ; then : else - as_fn_error "package file TrilinosConfig.cmake not found" "$LINENO" 5 + as_fn_error $? "package file TrilinosConfig.cmake not found" "$LINENO" 5 fi DEAL_II_TRILINOS_LIBS="stratimikosamesos stratimikosaztecoo stratimikosifpack stratimikosml stratimikos ml amesos belos ifpack aztecoo rtop sacado thyra thyraepetra thyraepetraext epetraext epetra teuchos triutils" fi @@ -11584,12 +11536,12 @@ else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } - as_fn_error "*** Your Trilinos installation is not compatible with the C++ standard selected for this compiler. See the deal.II FAQ page for a solution. ***" "$LINENO" 5 + as_fn_error $? "*** Your Trilinos installation is not compatible with the C++ standard selected for this compiler. See the deal.II FAQ page for a solution. ***" "$LINENO" 5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext else - as_fn_error "File $DEAL_II_TRILINOS_INCDIR/Sacado_cmath.hpp not found." "$LINENO" 5 + as_fn_error $? "File $DEAL_II_TRILINOS_INCDIR/Sacado_cmath.hpp not found." "$LINENO" 5 fi for ac_header in Amesos.h \ @@ -11614,15 +11566,14 @@ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_cxx_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" -eval as_val=\$$as_ac_Header - if test "x$as_val" = x""yes; then : +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF else - as_fn_error "The Trilinos installation is missing one or more header files necessary for the deal.II Trilinos interfaces. Please re-install Trilinos with the missing Trilinos sub-packages enabled." "$LINENO" 5 + as_fn_error $? "The Trilinos installation is missing one or more header files necessary for the deal.II Trilinos interfaces. Please re-install Trilinos with the missing Trilinos sub-packages enabled." "$LINENO" 5 fi @@ -11675,7 +11626,7 @@ $as_echo "explicitly disabled" >&6; } $as_echo "$DEAL_II_ARPACK_DIR" >&6; } if test ! -d $DEAL_II_ARPACK_DIR \ ; then - as_fn_error "Path to ARPACK specified with --with-arpack does not point to a complete ARPACK installation" "$LINENO" 5 + as_fn_error $? "Path to ARPACK specified with --with-arpack does not point to a complete ARPACK installation" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ARPACK library architecture" >&5 @@ -11724,7 +11675,7 @@ $as_echo "$DEAL_II_MUMPS_DIR" >&6; } -o ! -d $DEAL_II_MUMPS_DIR/include \ -o ! -d $DEAL_II_MUMPS_DIR/lib \ ; then - as_fn_error "Path to MUMPS specified with --with-mumps does not point to a complete MUMPS installation" "$LINENO" 5 + as_fn_error $? "Path to MUMPS specified with --with-mumps does not point to a complete MUMPS installation" "$LINENO" 5 fi fi @@ -11747,11 +11698,11 @@ if test "${with_scalapack+set}" = set; then : { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DEAL_II_SCALAPACK_DIR" >&5 $as_echo "$DEAL_II_SCALAPACK_DIR" >&6; } if test ! -d $DEAL_II_SCALAPCK_DIR ; then - as_fn_error "The path to SCALAPACK specified with --with-scalapack does t point to a complete SCALAPACK installation" "$LINENO" 5 + as_fn_error $? "The path to SCALAPACK specified with --with-scalapack does t point to a complete SCALAPACK installation" "$LINENO" 5 fi else - as_fn_error "If MUMPS is used, the path to SCALAPACK must be specified with --with-scalapack" "$LINENO" 5 + as_fn_error $? "If MUMPS is used, the path to SCALAPACK must be specified with --with-scalapack" "$LINENO" 5 fi @@ -11766,11 +11717,11 @@ if test "${with_blacs+set}" = set; then : $as_echo "$DEAL_II_BLACS_DIR" >&6; } if test ! -d $DEAL_II_BLACS_DIR \ -o ! -d $DEAL_II_BLACS_DIR/LIB ; then - as_fn_error "The path to BLACS specified with --with-blacs does not point to a complete BLACS installation" "$LINENO" 5 + as_fn_error $? "The path to BLACS specified with --with-blacs does not point to a complete BLACS installation" "$LINENO" 5 fi else - as_fn_error "If MUMPS is used, the path to BLACS must be specified with --with-blacs" "$LINENO" 5 + as_fn_error $? "If MUMPS is used, the path to BLACS must be specified with --with-blacs" "$LINENO" 5 fi @@ -11825,15 +11776,15 @@ fi $as_echo "yes" >&6; } if test ! -d "${use_p4est}/DEBUG" -o ! -d "${use_p4est}/FAST" ; then - as_fn_error "p4est directories $use_p4est/DEBUG or $use_p4est/FAST not found" "$LINENO" 5 + as_fn_error $? "p4est directories $use_p4est/DEBUG or $use_p4est/FAST not found" "$LINENO" 5 fi if test "x${DEAL_II_COMPILER_SUPPORTS_MPI}" != "x1" ; then - as_fn_error "When using p4est you also need to enable MPI." "$LINENO" 5 + as_fn_error $? "When using p4est you also need to enable MPI." "$LINENO" 5 fi if test "x$enableshared" != "xyes" ; then - as_fn_error "When using p4est with shared libraries, you need to build + as_fn_error $? "When using p4est with shared libraries, you need to build deal.II with shared libraries as well." "$LINENO" 5 fi @@ -11861,7 +11812,7 @@ $as_echo "lib64" >&6; } $as_echo "lib" >&6; } DEAL_II_P4EST_LIBDIR_NAME=lib else - as_fn_error "could not determine whether p4est stores its library in lib/ or lib64/ directories" "$LINENO" 5 + as_fn_error $? "could not determine whether p4est stores its library in lib/ or lib64/ directories" "$LINENO" 5 fi fi @@ -11938,7 +11889,7 @@ if test "${with_blas+set}" = set; then : as_ac_Lib=`$as_echo "ac_cv_lib_$blas''_daxpy_" | $as_tr_sh` { $as_echo "$as_me:${as_lineno-$LINENO}: checking for daxpy_ in -l$blas" >&5 $as_echo_n "checking for daxpy_ in -l$blas... " >&6; } -if { as_var=$as_ac_Lib; eval "test \"\${$as_var+set}\" = set"; }; then : +if eval \${$as_ac_Lib+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS @@ -11973,8 +11924,7 @@ fi eval ac_res=\$$as_ac_Lib { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } -eval as_val=\$$as_ac_Lib - if test "x$as_val" = x""yes; then : +if eval test \"x\$"$as_ac_Lib"\" = x"yes"; then : LIBS="-l$blas $LIBS" @@ -12067,7 +12017,7 @@ rm -f core conftest.err conftest.$ac_objext \ as_ac_Lib=`$as_echo "ac_cv_lib_$blas''_daxpy_" | $as_tr_sh` { $as_echo "$as_me:${as_lineno-$LINENO}: checking for daxpy_ in -l$blas" >&5 $as_echo_n "checking for daxpy_ in -l$blas... " >&6; } -if { as_var=$as_ac_Lib; eval "test \"\${$as_var+set}\" = set"; }; then : +if eval \${$as_ac_Lib+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS @@ -12102,8 +12052,7 @@ fi eval ac_res=\$$as_ac_Lib { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } -eval as_val=\$$as_ac_Lib - if test "x$as_val" = x""yes; then : +if eval test \"x\$"$as_ac_Lib"\" = x"yes"; then : LIBS="-l$blas $LIBS" @@ -12189,7 +12138,7 @@ if test "${with_zlib+set}" = set; then : as_ac_Lib=`$as_echo "ac_cv_lib_$zlib''_crc32" | $as_tr_sh` { $as_echo "$as_me:${as_lineno-$LINENO}: checking for crc32 in -l$zlib" >&5 $as_echo_n "checking for crc32 in -l$zlib... " >&6; } -if { as_var=$as_ac_Lib; eval "test \"\${$as_var+set}\" = set"; }; then : +if eval \${$as_ac_Lib+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS @@ -12224,11 +12173,10 @@ fi eval ac_res=\$$as_ac_Lib { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } -eval as_val=\$$as_ac_Lib - if test "x$as_val" = x""yes; then : +if eval test \"x\$"$as_ac_Lib"\" = x"yes"; then : ac_fn_cxx_check_header_mongrel "$LINENO" "zlib.h" "ac_cv_header_zlib_h" "$ac_includes_default" -if test "x$ac_cv_header_zlib_h" = x""yes; then : +if test "x$ac_cv_header_zlib_h" = xyes; then : LIBS="-l$zlib $LIBS" @@ -12249,7 +12197,7 @@ fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether byte ordering is bigendian" >&5 $as_echo_n "checking whether byte ordering is bigendian... " >&6; } -if test "${ac_cv_c_bigendian+set}" = set; then : +if ${ac_cv_c_bigendian+:} false; then : $as_echo_n "(cached) " >&6 else ac_cv_c_bigendian=unknown @@ -12469,7 +12417,7 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h ;; #( *) - as_fn_error "unknown endianness + as_fn_error $? "unknown endianness presetting ac_cv_c_bigendian=no (or yes) will help" "$LINENO" 5 ;; esac @@ -12479,11 +12427,11 @@ $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h as_ac_File=`$as_echo "ac_cv_file_$i/lib/tecio.a" | $as_tr_sh` { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $i/lib/tecio.a" >&5 $as_echo_n "checking for $i/lib/tecio.a... " >&6; } -if { as_var=$as_ac_File; eval "test \"\${$as_var+set}\" = set"; }; then : +if eval \${$as_ac_File+:} false; then : $as_echo_n "(cached) " >&6 else test "$cross_compiling" = yes && - as_fn_error "cannot check for file existence when cross compiling" "$LINENO" 5 + as_fn_error $? "cannot check for file existence when cross compiling" "$LINENO" 5 if test -r "$i/lib/tecio.a"; then eval "$as_ac_File=yes" else @@ -12493,19 +12441,18 @@ fi eval ac_res=\$$as_ac_File { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } -eval as_val=\$$as_ac_File - if test "x$as_val" = x""yes; then : +if eval test \"x\$"$as_ac_File"\" = x"yes"; then : TECPLOT_LIB="$i/lib/tecio.a" fi as_ac_File=`$as_echo "ac_cv_file_$i/include/TECIO.h" | $as_tr_sh` { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $i/include/TECIO.h" >&5 $as_echo_n "checking for $i/include/TECIO.h... " >&6; } -if { as_var=$as_ac_File; eval "test \"\${$as_var+set}\" = set"; }; then : +if eval \${$as_ac_File+:} false; then : $as_echo_n "(cached) " >&6 else test "$cross_compiling" = yes && - as_fn_error "cannot check for file existence when cross compiling" "$LINENO" 5 + as_fn_error $? "cannot check for file existence when cross compiling" "$LINENO" 5 if test -r "$i/include/TECIO.h"; then eval "$as_ac_File=yes" else @@ -12515,8 +12462,7 @@ fi eval ac_res=\$$as_ac_File { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } -eval as_val=\$$as_ac_File - if test "x$as_val" = x""yes; then : +if eval test \"x\$"$as_ac_File"\" = x"yes"; then : TECPLOT_INCLUDE_DIR=-I$i/include else TECPLOT_LIB="" @@ -12602,7 +12548,7 @@ fi fi ac_fn_cxx_check_header_mongrel "$LINENO" "netcdfcpp.h" "ac_cv_header_netcdfcpp_h" "$ac_includes_default" -if test "x$ac_cv_header_netcdfcpp_h" = x""yes; then : +if test "x$ac_cv_header_netcdfcpp_h" = xyes; then : fi @@ -12610,7 +12556,7 @@ fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for nc_open in -lnetcdf" >&5 $as_echo_n "checking for nc_open in -lnetcdf... " >&6; } -if test "${ac_cv_lib_netcdf_nc_open+set}" = set; then : +if ${ac_cv_lib_netcdf_nc_open+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS @@ -12644,7 +12590,7 @@ LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_netcdf_nc_open" >&5 $as_echo "$ac_cv_lib_netcdf_nc_open" >&6; } -if test "x$ac_cv_lib_netcdf_nc_open" = x""yes; then : +if test "x$ac_cv_lib_netcdf_nc_open" = xyes; then : OLD_LIBS="$LIBS" @@ -12703,13 +12649,13 @@ $as_echo_n "checking for METIS library directory... " >&6; } $as_echo "$DEAL_II_METIS_DIR" >&6; } if test ! -d $DEAL_II_METIS_DIR/lib ; then - as_fn_error "Path to Metis specified with --with-metis does not point to a complete Metis installation" "$LINENO" 5 + as_fn_error $? "Path to Metis specified with --with-metis does not point to a complete Metis installation" "$LINENO" 5 fi DEAL_II_METIS_LIBDIR="$DEAL_II_METIS_DIR/lib" if test ! -d $DEAL_II_METIS_DIR/include ; then - as_fn_error "Path to Metis specified with --with-metis does not point to a complete Metis installation" "$LINENO" 5 + as_fn_error $? "Path to Metis specified with --with-metis does not point to a complete Metis installation" "$LINENO" 5 fi DEAL_II_METIS_INCDIR="$DEAL_II_METIS_DIR/include" @@ -12723,7 +12669,7 @@ else $as_echo "$DEAL_II_METIS_DIR" >&6; } if test ! -d $DEAL_II_METIS_DIR/lib ; then - as_fn_error "The path to Metis specified in the METIS_DIR environment variable does not point to a complete Metis installation" "$LINENO" 5 + as_fn_error $? "The path to Metis specified in the METIS_DIR environment variable does not point to a complete Metis installation" "$LINENO" 5 fi DEAL_II_METIS_LIBDIR="$DEAL_II_METIS_DIR" else @@ -12747,7 +12693,7 @@ $as_echo_n "checking for METIS library directory... " >&6; } $as_echo "$DEAL_II_METIS_LIBDIR" >&6; } if test ! -d $DEAL_II_METIS_LIBDIR ; then - as_fn_error "Path to Metis specified with --with-metis does not point to a complete Metis installation" "$LINENO" 5 + as_fn_error $? "Path to Metis specified with --with-metis does not point to a complete Metis installation" "$LINENO" 5 fi else @@ -12759,7 +12705,7 @@ else $as_echo "$DEAL_II_METIS_LIBDIR" >&6; } if test ! -d $DEAL_II_METIS_LIBDIR ; then - as_fn_error "The path to Metis specified in the METIS_DIR environment variable does not point to a complete Metis installation" "$LINENO" 5 + as_fn_error $? "The path to Metis specified in the METIS_DIR environment variable does not point to a complete Metis installation" "$LINENO" 5 fi else if test "x$USE_CONTRIB_METIS" != "xyes" ; then @@ -12856,7 +12802,7 @@ $as_echo "#define HAVE_LIBUMFPACK 1" >>confdefs.h LDFLAGS="-L${UMFPACK_DIR}/UMFPACK $LDFLAGS" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for umfpack_di_defaults in -lumfpack" >&5 $as_echo_n "checking for umfpack_di_defaults in -lumfpack... " >&6; } -if test "${ac_cv_lib_umfpack_umfpack_di_defaults+set}" = set; then : +if ${ac_cv_lib_umfpack_umfpack_di_defaults+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS @@ -12890,7 +12836,7 @@ LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_umfpack_umfpack_di_defaults" >&5 $as_echo "$ac_cv_lib_umfpack_umfpack_di_defaults" >&6; } -if test "x$ac_cv_lib_umfpack_umfpack_di_defaults" = x""yes; then : +if test "x$ac_cv_lib_umfpack_umfpack_di_defaults" = xyes; then : LIBS="$LIBS -lumfpack" @@ -12904,7 +12850,7 @@ else LDFLAGS="-L${UMFPACK_DIR}/lib $OLD_LDFLAGS" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for umfpack_di_defaults in -lumfpack" >&5 $as_echo_n "checking for umfpack_di_defaults in -lumfpack... " >&6; } -if test "${ac_cv_lib_umfpack_umfpack_di_defaults+set}" = set; then : +if ${ac_cv_lib_umfpack_umfpack_di_defaults+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS @@ -12938,7 +12884,7 @@ LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_umfpack_umfpack_di_defaults" >&5 $as_echo "$ac_cv_lib_umfpack_umfpack_di_defaults" >&6; } -if test "x$ac_cv_lib_umfpack_umfpack_di_defaults" = x""yes; then : +if test "x$ac_cv_lib_umfpack_umfpack_di_defaults" = xyes; then : LIBS="$LIBS -lumfpack" @@ -12949,7 +12895,7 @@ if test "x$ac_cv_lib_umfpack_umfpack_di_defaults" = x""yes; then : else - as_fn_error "installation of UMFPACK could not be determined" "$LINENO" 5 + as_fn_error $? "installation of UMFPACK could not be determined" "$LINENO" 5 fi @@ -12963,7 +12909,7 @@ fi LDFLAGS="-L${UMFPACK_DIR}/AMD/Lib $LDFLAGS" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for amd_info in -lamd" >&5 $as_echo_n "checking for amd_info in -lamd... " >&6; } -if test "${ac_cv_lib_amd_amd_info+set}" = set; then : +if ${ac_cv_lib_amd_amd_info+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS @@ -12997,7 +12943,7 @@ LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_amd_amd_info" >&5 $as_echo "$ac_cv_lib_amd_amd_info" >&6; } -if test "x$ac_cv_lib_amd_amd_info" = x""yes; then : +if test "x$ac_cv_lib_amd_amd_info" = xyes; then : LIBS="$LIBS -lamd" @@ -13011,7 +12957,7 @@ else LDFLAGS="-L${UMFPACK_DIR}/lib $OLD_LDFLAGS" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for amd_info in -lamd" >&5 $as_echo_n "checking for amd_info in -lamd... " >&6; } -if test "${ac_cv_lib_amd_amd_info+set}" = set; then : +if ${ac_cv_lib_amd_amd_info+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS @@ -13045,7 +12991,7 @@ LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_amd_amd_info" >&5 $as_echo "$ac_cv_lib_amd_amd_info" >&6; } -if test "x$ac_cv_lib_amd_amd_info" = x""yes; then : +if test "x$ac_cv_lib_amd_amd_info" = xyes; then : LIBS="$LIBS -lamd" @@ -13056,7 +13002,7 @@ if test "x$ac_cv_lib_amd_amd_info" = x""yes; then : else - as_fn_error "installation of AMD could not be determined" "$LINENO" 5 + as_fn_error $? "installation of AMD could not be determined" "$LINENO" 5 fi @@ -13070,11 +13016,11 @@ fi as_ac_File=`$as_echo "ac_cv_file_${UMFPACK_DIR}/UMFPACK/Include/umfpack.h" | $as_tr_sh` { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${UMFPACK_DIR}/UMFPACK/Include/umfpack.h" >&5 $as_echo_n "checking for ${UMFPACK_DIR}/UMFPACK/Include/umfpack.h... " >&6; } -if { as_var=$as_ac_File; eval "test \"\${$as_var+set}\" = set"; }; then : +if eval \${$as_ac_File+:} false; then : $as_echo_n "(cached) " >&6 else test "$cross_compiling" = yes && - as_fn_error "cannot check for file existence when cross compiling" "$LINENO" 5 + as_fn_error $? "cannot check for file existence when cross compiling" "$LINENO" 5 if test -r "${UMFPACK_DIR}/UMFPACK/Include/umfpack.h"; then eval "$as_ac_File=yes" else @@ -13084,8 +13030,7 @@ fi eval ac_res=\$$as_ac_File { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } -eval as_val=\$$as_ac_File - if test "x$as_val" = x""yes; then : +if eval test \"x\$"$as_ac_File"\" = x"yes"; then : UMFPACK_INCLUDE_DIR=-I${UMFPACK_DIR}/UMFPACK/Include @@ -13094,11 +13039,11 @@ else as_ac_File=`$as_echo "ac_cv_file_${UMFPACK_DIR}/include/suitesparse/umfpack.h" | $as_tr_sh` { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${UMFPACK_DIR}/include/suitesparse/umfpack.h" >&5 $as_echo_n "checking for ${UMFPACK_DIR}/include/suitesparse/umfpack.h... " >&6; } -if { as_var=$as_ac_File; eval "test \"\${$as_var+set}\" = set"; }; then : +if eval \${$as_ac_File+:} false; then : $as_echo_n "(cached) " >&6 else test "$cross_compiling" = yes && - as_fn_error "cannot check for file existence when cross compiling" "$LINENO" 5 + as_fn_error $? "cannot check for file existence when cross compiling" "$LINENO" 5 if test -r "${UMFPACK_DIR}/include/suitesparse/umfpack.h"; then eval "$as_ac_File=yes" else @@ -13108,14 +13053,13 @@ fi eval ac_res=\$$as_ac_File { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } -eval as_val=\$$as_ac_File - if test "x$as_val" = x""yes; then : +if eval test \"x\$"$as_ac_File"\" = x"yes"; then : UMFPACK_INCLUDE_DIR=-I${UMFPACK_DIR}/include/suitesparse else - as_fn_error "installation of UMFPACK could not be determined" "$LINENO" 5 + as_fn_error $? "installation of UMFPACK could not be determined" "$LINENO" 5 fi @@ -13128,11 +13072,11 @@ fi as_ac_File=`$as_echo "ac_cv_file_${UMFPACK_DIR}/AMD/Include/amd.h" | $as_tr_sh` { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${UMFPACK_DIR}/AMD/Include/amd.h" >&5 $as_echo_n "checking for ${UMFPACK_DIR}/AMD/Include/amd.h... " >&6; } -if { as_var=$as_ac_File; eval "test \"\${$as_var+set}\" = set"; }; then : +if eval \${$as_ac_File+:} false; then : $as_echo_n "(cached) " >&6 else test "$cross_compiling" = yes && - as_fn_error "cannot check for file existence when cross compiling" "$LINENO" 5 + as_fn_error $? "cannot check for file existence when cross compiling" "$LINENO" 5 if test -r "${UMFPACK_DIR}/AMD/Include/amd.h"; then eval "$as_ac_File=yes" else @@ -13142,8 +13086,7 @@ fi eval ac_res=\$$as_ac_File { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } -eval as_val=\$$as_ac_File - if test "x$as_val" = x""yes; then : +if eval test \"x\$"$as_ac_File"\" = x"yes"; then : UMFPACK_INCLUDE_DIR="${UMFPACK_INCLUDE_DIR} -I${UMFPACK_DIR}/AMD/Include" @@ -13152,11 +13095,11 @@ else as_ac_File=`$as_echo "ac_cv_file_${UMFPACK_DIR}/include/suitesparse/umfpack.h" | $as_tr_sh` { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${UMFPACK_DIR}/include/suitesparse/umfpack.h" >&5 $as_echo_n "checking for ${UMFPACK_DIR}/include/suitesparse/umfpack.h... " >&6; } -if { as_var=$as_ac_File; eval "test \"\${$as_var+set}\" = set"; }; then : +if eval \${$as_ac_File+:} false; then : $as_echo_n "(cached) " >&6 else test "$cross_compiling" = yes && - as_fn_error "cannot check for file existence when cross compiling" "$LINENO" 5 + as_fn_error $? "cannot check for file existence when cross compiling" "$LINENO" 5 if test -r "${UMFPACK_DIR}/include/suitesparse/umfpack.h"; then eval "$as_ac_File=yes" else @@ -13166,14 +13109,13 @@ fi eval ac_res=\$$as_ac_File { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } -eval as_val=\$$as_ac_File - if test "x$as_val" = x""yes; then : +if eval test \"x\$"$as_ac_File"\" = x"yes"; then : UMFPACK_INCLUDE_DIR="${UMFPACK_INCLUDE_DIR} -I${UMFPACK_DIR}/include/suitesparse" else - as_fn_error "installation of UMFPACK could not be determined" "$LINENO" 5 + as_fn_error $? "installation of UMFPACK could not be determined" "$LINENO" 5 fi @@ -13187,11 +13129,11 @@ fi as_ac_File=`$as_echo "ac_cv_file_${UMFPACK_DIR}/UFconfig/UFconfig.h" | $as_tr_sh` { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${UMFPACK_DIR}/UFconfig/UFconfig.h" >&5 $as_echo_n "checking for ${UMFPACK_DIR}/UFconfig/UFconfig.h... " >&6; } -if { as_var=$as_ac_File; eval "test \"\${$as_var+set}\" = set"; }; then : +if eval \${$as_ac_File+:} false; then : $as_echo_n "(cached) " >&6 else test "$cross_compiling" = yes && - as_fn_error "cannot check for file existence when cross compiling" "$LINENO" 5 + as_fn_error $? "cannot check for file existence when cross compiling" "$LINENO" 5 if test -r "${UMFPACK_DIR}/UFconfig/UFconfig.h"; then eval "$as_ac_File=yes" else @@ -13201,14 +13143,13 @@ fi eval ac_res=\$$as_ac_File { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } -eval as_val=\$$as_ac_File - if test "x$as_val" = x""yes; then : +if eval test \"x\$"$as_ac_File"\" = x"yes"; then : UMFPACK_INCLUDE_DIR="${UMFPACK_INCLUDE_DIR} -I${UMFPACK_DIR}/UFconfig" else - as_fn_error "not found" "$LINENO" 5 + as_fn_error $? "not found" "$LINENO" 5 fi @@ -13225,27 +13166,27 @@ fi CXXFLAGS="-I$UMFPACK_INCDIR $CXXFLAGS" CPPFLAGS="-I$UMFPACK_INCDIR $CPPFLAGS" ac_fn_cxx_check_header_mongrel "$LINENO" "umfpack.h" "ac_cv_header_umfpack_h" "$ac_includes_default" -if test "x$ac_cv_header_umfpack_h" = x""yes; then : +if test "x$ac_cv_header_umfpack_h" = xyes; then : else - as_fn_error "installation of UMFPACK could not be determined" "$LINENO" 5 + as_fn_error $? "installation of UMFPACK could not be determined" "$LINENO" 5 fi ac_fn_cxx_check_header_mongrel "$LINENO" "amd.h" "ac_cv_header_amd_h" "$ac_includes_default" -if test "x$ac_cv_header_amd_h" = x""yes; then : +if test "x$ac_cv_header_amd_h" = xyes; then : else - as_fn_error "installation of UMFPACK could not be determined" "$LINENO" 5 + as_fn_error $? "installation of UMFPACK could not be determined" "$LINENO" 5 fi ac_fn_cxx_check_header_mongrel "$LINENO" "UFconfig.h" "ac_cv_header_UFconfig_h" "$ac_includes_default" -if test "x$ac_cv_header_UFconfig_h" = x""yes; then : +if test "x$ac_cv_header_UFconfig_h" = xyes; then : else - as_fn_error "installation of UMFPACK could not be determined" "$LINENO" 5 + as_fn_error $? "installation of UMFPACK could not be determined" "$LINENO" 5 fi @@ -13253,7 +13194,7 @@ fi if test "x$UMFPACK_LIBDIR" != "x" ; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for amd_info in -lamd" >&5 $as_echo_n "checking for amd_info in -lamd... " >&6; } -if test "${ac_cv_lib_amd_amd_info+set}" = set; then : +if ${ac_cv_lib_amd_amd_info+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS @@ -13287,7 +13228,7 @@ LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_amd_amd_info" >&5 $as_echo "$ac_cv_lib_amd_amd_info" >&6; } -if test "x$ac_cv_lib_amd_amd_info" = x""yes; then : +if test "x$ac_cv_lib_amd_amd_info" = xyes; then : LIBS="$LIBS -lamd" @@ -13297,13 +13238,13 @@ if test "x$ac_cv_lib_amd_amd_info" = x""yes; then : fi else - as_fn_error "installation of AMD could not be determined" "$LINENO" 5 + as_fn_error $? "installation of AMD could not be determined" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for umfpack_di_defaults in -lumfpack" >&5 $as_echo_n "checking for umfpack_di_defaults in -lumfpack... " >&6; } -if test "${ac_cv_lib_umfpack_umfpack_di_defaults+set}" = set; then : +if ${ac_cv_lib_umfpack_umfpack_di_defaults+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS @@ -13337,7 +13278,7 @@ LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_umfpack_umfpack_di_defaults" >&5 $as_echo "$ac_cv_lib_umfpack_umfpack_di_defaults" >&6; } -if test "x$ac_cv_lib_umfpack_umfpack_di_defaults" = x""yes; then : +if test "x$ac_cv_lib_umfpack_umfpack_di_defaults" = xyes; then : LIBS="$LIBS -lumfpack" @@ -13347,14 +13288,14 @@ if test "x$ac_cv_lib_umfpack_umfpack_di_defaults" = x""yes; then : fi else - as_fn_error "installation of UMFPACK could not be determined" "$LINENO" 5 + as_fn_error $? "installation of UMFPACK could not be determined" "$LINENO" 5 fi else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for amd_info in -lamd" >&5 $as_echo_n "checking for amd_info in -lamd... " >&6; } -if test "${ac_cv_lib_amd_amd_info+set}" = set; then : +if ${ac_cv_lib_amd_amd_info+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS @@ -13388,20 +13329,20 @@ LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_amd_amd_info" >&5 $as_echo "$ac_cv_lib_amd_amd_info" >&6; } -if test "x$ac_cv_lib_amd_amd_info" = x""yes; then : +if test "x$ac_cv_lib_amd_amd_info" = xyes; then : LIBS="$LIBS -lamd" else - as_fn_error "installation of AMD could not be determined" "$LINENO" 5 + as_fn_error $? "installation of AMD could not be determined" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for umfpack_di_defaults in -lumfpack" >&5 $as_echo_n "checking for umfpack_di_defaults in -lumfpack... " >&6; } -if test "${ac_cv_lib_umfpack_umfpack_di_defaults+set}" = set; then : +if ${ac_cv_lib_umfpack_umfpack_di_defaults+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS @@ -13435,14 +13376,14 @@ LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_umfpack_umfpack_di_defaults" >&5 $as_echo "$ac_cv_lib_umfpack_umfpack_di_defaults" >&6; } -if test "x$ac_cv_lib_umfpack_umfpack_di_defaults" = x""yes; then : +if test "x$ac_cv_lib_umfpack_umfpack_di_defaults" = xyes; then : LIBS="$LIBS -lumfpack" else - as_fn_error "installation of UMFPACK could not be determined" "$LINENO" 5 + as_fn_error $? "installation of UMFPACK could not be determined" "$LINENO" 5 fi @@ -13463,7 +13404,7 @@ if test "${with_lapack+set}" = set; then : as_ac_Lib=`$as_echo "ac_cv_lib_$lapack''_dgbsv_" | $as_tr_sh` { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dgbsv_ in -l$lapack" >&5 $as_echo_n "checking for dgbsv_ in -l$lapack... " >&6; } -if { as_var=$as_ac_Lib; eval "test \"\${$as_var+set}\" = set"; }; then : +if eval \${$as_ac_Lib+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS @@ -13498,8 +13439,7 @@ fi eval ac_res=\$$as_ac_Lib { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } -eval as_val=\$$as_ac_Lib - if test "x$as_val" = x""yes; then : +if eval test \"x\$"$as_ac_Lib"\" = x"yes"; then : LIBS="-l$lapack $LIBS" @@ -13511,7 +13451,7 @@ $as_echo "#define HAVE_LIBLAPACK 1" >>confdefs.h USE_CONTRIB_LAPACK='yes' else - as_fn_error "LAPACK library $lapack not found" "$LINENO" 5 + as_fn_error $? "LAPACK library $lapack not found" "$LINENO" 5 fi @@ -13522,10 +13462,10 @@ fi if test "x$with_blas" != "x" -a "x$with_blas" != "xno" ; then ac_fn_cxx_check_func "$LINENO" "daxpy_" "ac_cv_func_daxpy_" -if test "x$ac_cv_func_daxpy_" = x""yes; then : +if test "x$ac_cv_func_daxpy_" = xyes; then : else - as_fn_error "BLAS library not installed correctly($with_blas)" "$LINENO" 5 + as_fn_error $? "BLAS library not installed correctly($with_blas)" "$LINENO" 5 fi fi @@ -13535,8 +13475,7 @@ for ac_func in daxpy_ saxpy_ dgemv_ sgemv_ dgeev_ sgeev_ dgeevx_ sgeevx_ do : as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` ac_fn_cxx_check_func "$LINENO" "$ac_func" "$as_ac_var" -eval as_val=\$$as_ac_var - if test "x$as_val" = x""yes; then : +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF @@ -13548,8 +13487,7 @@ for ac_func in dgemm_ sgemm_ dgetrf_ sgetrf_ dgetri_ sgetri_ do : as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` ac_fn_cxx_check_func "$LINENO" "$ac_func" "$as_ac_var" -eval as_val=\$$as_ac_var - if test "x$as_val" = x""yes; then : +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF @@ -13561,8 +13499,7 @@ for ac_func in dgeqrf_ sgeqrf_ dormqr_ sormqr_ dorgqr_ sorgqr_ dtrtrs_ strtrs_ do : as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` ac_fn_cxx_check_func "$LINENO" "$ac_func" "$as_ac_var" -eval as_val=\$$as_ac_var - if test "x$as_val" = x""yes; then : +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF @@ -13574,8 +13511,7 @@ for ac_func in dgetrs_ sgetrs_ dstev_ sstev_ dsygv_ ssygv_ dsygvx_ ssygvx_ do : as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` ac_fn_cxx_check_func "$LINENO" "$ac_func" "$as_ac_var" -eval as_val=\$$as_ac_var - if test "x$as_val" = x""yes; then : +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF @@ -13587,8 +13523,7 @@ for ac_func in dsyevx_ ssyevx_ do : as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` ac_fn_cxx_check_func "$LINENO" "$ac_func" "$as_ac_var" -eval as_val=\$$as_ac_var - if test "x$as_val" = x""yes; then : +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF @@ -13600,8 +13535,7 @@ for ac_func in dgesvd_ sgesvd_ dgesdd_ sgesdd_ dgelsd_ sgelsd_ do : as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` ac_fn_cxx_check_func "$LINENO" "$ac_func" "$as_ac_var" -eval as_val=\$$as_ac_var - if test "x$as_val" = x""yes; then : +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF @@ -13612,7 +13546,7 @@ done for ac_func in jn do : ac_fn_cxx_check_func "$LINENO" "jn" "ac_cv_func_jn" -if test "x$ac_cv_func_jn" = x""yes; then : +if test "x$ac_cv_func_jn" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_JN 1 _ACEOF @@ -13736,7 +13670,7 @@ $as_echo "yes" >&6; } else - as_fn_error "invalid combination of flags!" "$LINENO" 5 + as_fn_error $? "invalid combination of flags!" "$LINENO" 5 exit 1; fi @@ -13763,7 +13697,7 @@ $as_echo "yes" >&6; } else - as_fn_error "invalid combination of flags!" "$LINENO" 5 + as_fn_error $? "invalid combination of flags!" "$LINENO" 5 exit 1; fi @@ -13785,8 +13719,8 @@ $as_echo_n "checking whether CPU supports SSE2... " >&6; } if test "$cross_compiling" = yes; then : { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error "cannot run test program while cross compiling -See \`config.log' for more details." "$LINENO" 5; } +as_fn_error $? "cannot run test program while cross compiling +See \`config.log' for more details" "$LINENO" 5; } else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ @@ -13828,8 +13762,8 @@ $as_echo_n "checking whether CPU supports AVX... " >&6; } if test "$cross_compiling" = yes; then : { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error "cannot run test program while cross compiling -See \`config.log' for more details." "$LINENO" 5; } +as_fn_error $? "cannot run test program while cross compiling +See \`config.log' for more details" "$LINENO" 5; } else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ @@ -13972,14 +13906,14 @@ $as_echo "$DOXYGEN" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5 $as_echo "not found" >&6; } - as_fn_error "Invalid doxygen path $DOXYGEN" "$LINENO" 5 + as_fn_error $? "Invalid doxygen path $DOXYGEN" "$LINENO" 5 fi else # Extract the first word of "doxygen", so it can be a program name with args. set dummy doxygen; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_DOXYGEN+set}" = set; then : +if ${ac_cv_path_DOXYGEN+:} false; then : $as_echo_n "(cached) " >&6 else case $DOXYGEN in @@ -14044,7 +13978,7 @@ $as_echo "1.5.x or later" >&6; } set dummy dot; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_DOT+set}" = set; then : +if ${ac_cv_prog_DOT+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$DOT"; then @@ -14092,7 +14026,7 @@ fi set dummy perl; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_PERL+set}" = set; then : +if ${ac_cv_path_PERL+:} false; then : $as_echo_n "(cached) " >&6 else case $PERL in @@ -14135,7 +14069,7 @@ fi set dummy qmake; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_QMAKE+set}" = set; then : +if ${ac_cv_prog_QMAKE+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$QMAKE"; then @@ -14173,7 +14107,7 @@ if test -n "$QMAKE" ; then set dummy $QMAKE; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_QMAKE+set}" = set; then : +if ${ac_cv_path_QMAKE+:} false; then : $as_echo_n "(cached) " >&6 else case $QMAKE in @@ -14292,6 +14226,7 @@ DEFS=-DHAVE_CONFIG_H ac_libobjs= ac_ltlibobjs= +U= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' @@ -14308,7 +14243,7 @@ LTLIBOBJS=$ac_ltlibobjs -: ${CONFIG_STATUS=./config.status} +: "${CONFIG_STATUS=./config.status}" ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" @@ -14409,6 +14344,7 @@ fi IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. +as_myself= case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -14454,19 +14390,19 @@ export LANGUAGE (unset CDPATH) >/dev/null 2>&1 && unset CDPATH -# as_fn_error ERROR [LINENO LOG_FD] -# --------------------------------- +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with status $?, using 1 if that was 0. +# script with STATUS, using 1 if that was 0. as_fn_error () { - as_status=$?; test $as_status -eq 0 && as_status=1 - if test "$3"; then - as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3 + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi - $as_echo "$as_me: error: $1" >&2 + $as_echo "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error @@ -14662,7 +14598,7 @@ $as_echo X"$as_dir" | test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p @@ -14716,7 +14652,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # values after options handling. ac_log=" This file was extended by deal.II $as_me 7.2.pre, which was -generated by GNU Autoconf 2.65. Invocation command line was +generated by GNU Autoconf 2.68. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS @@ -14778,10 +14714,10 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ deal.II config.status 7.2.pre -configured by $0, generated by GNU Autoconf 2.65, +configured by $0, generated by GNU Autoconf 2.68, with options \\"\$ac_cs_config\\" -Copyright (C) 2009 Free Software Foundation, Inc. +Copyright (C) 2010 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." @@ -14796,11 +14732,16 @@ ac_need_defaults=: while test $# != 0 do case $1 in - --*=*) + --*=?*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; + --*=) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg= + ac_shift=: + ;; *) ac_option=$1 ac_optarg=$2 @@ -14822,6 +14763,7 @@ do $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; esac as_fn_append CONFIG_FILES " '$ac_optarg'" ac_need_defaults=false;; @@ -14834,7 +14776,7 @@ do ac_need_defaults=false;; --he | --h) # Conflict between --help and --header - as_fn_error "ambiguous option: \`$1' + as_fn_error $? "ambiguous option: \`$1' Try \`$0 --help' for more information.";; --help | --hel | -h ) $as_echo "$ac_cs_usage"; exit ;; @@ -14843,7 +14785,7 @@ Try \`$0 --help' for more information.";; ac_cs_silent=: ;; # This is an error. - -*) as_fn_error "unrecognized option: \`$1' + -*) as_fn_error $? "unrecognized option: \`$1' Try \`$0 --help' for more information." ;; *) as_fn_append ac_config_targets " $1" @@ -14895,7 +14837,7 @@ do "include/deal.II/base/config.h") CONFIG_HEADERS="$CONFIG_HEADERS include/deal.II/base/config.h" ;; "$process_files") CONFIG_FILES="$CONFIG_FILES $process_files" ;; - *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; esac done @@ -14917,9 +14859,10 @@ fi # after its creation but before its name has been assigned to `$tmp'. $debug || { - tmp= + tmp= ac_tmp= trap 'exit_status=$? - { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status + : "${ac_tmp:=$tmp}" + { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status ' 0 trap 'as_fn_exit 1' 1 2 13 15 } @@ -14927,12 +14870,13 @@ $debug || { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" + test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") -} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5 +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 +ac_tmp=$tmp # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. @@ -14949,12 +14893,12 @@ if test "x$ac_cr" = x; then fi ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then - ac_cs_awk_cr='\r' + ac_cs_awk_cr='\\r' else ac_cs_awk_cr=$ac_cr fi -echo 'BEGIN {' >"$tmp/subs1.awk" && +echo 'BEGIN {' >"$ac_tmp/subs1.awk" && _ACEOF @@ -14963,18 +14907,18 @@ _ACEOF echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && echo "_ACEOF" } >conf$$subs.sh || - as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 -ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` ac_delim='%!_!# ' for ac_last_try in false false false false false :; do . ./conf$$subs.sh || - as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` if test $ac_delim_n = $ac_delim_num; then break elif $ac_last_try; then - as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi @@ -14982,7 +14926,7 @@ done rm -f conf$$subs.sh cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -cat >>"\$tmp/subs1.awk" <<\\_ACAWK && +cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && _ACEOF sed -n ' h @@ -15030,7 +14974,7 @@ t delim rm -f conf$$subs.awk cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACAWK -cat >>"\$tmp/subs1.awk" <<_ACAWK && +cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && for (key in S) S_is_set[key] = 1 FS = "" @@ -15062,21 +15006,29 @@ if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" else cat -fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ - || as_fn_error "could not setup config files machinery" "$LINENO" 5 +fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 _ACEOF -# VPATH may cause trouble with some makes, so we remove $(srcdir), -# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# VPATH may cause trouble with some makes, so we remove sole $(srcdir), +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=/{ -s/:*\$(srcdir):*/:/ -s/:*\${srcdir}:*/:/ -s/:*@srcdir@:*/:/ -s/^\([^=]*=[ ]*\):*/\1/ + ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// s/:*$// +x +s/\(=[ ]*\).*/\1/ +G +s/\n// s/^[^=]*=[ ]*$// }' fi @@ -15088,7 +15040,7 @@ fi # test -n "$CONFIG_FILES" # No need to generate them if there are no CONFIG_HEADERS. # This happens for instance with `./config.status Makefile'. if test -n "$CONFIG_HEADERS"; then -cat >"$tmp/defines.awk" <<\_ACAWK || +cat >"$ac_tmp/defines.awk" <<\_ACAWK || BEGIN { _ACEOF @@ -15100,11 +15052,11 @@ _ACEOF # handling of long lines. ac_delim='%!_!# ' for ac_last_try in false false :; do - ac_t=`sed -n "/$ac_delim/p" confdefs.h` - if test -z "$ac_t"; then + ac_tt=`sed -n "/$ac_delim/p" confdefs.h` + if test -z "$ac_tt"; then break elif $ac_last_try; then - as_fn_error "could not make $CONFIG_HEADERS" "$LINENO" 5 + as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi @@ -15189,7 +15141,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - as_fn_error "could not setup config headers machinery" "$LINENO" 5 + as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 fi # test -n "$CONFIG_HEADERS" @@ -15202,7 +15154,7 @@ do esac case $ac_mode$ac_tag in :[FHL]*:*);; - :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac @@ -15221,7 +15173,7 @@ do for ac_f do case $ac_f in - -) ac_f="$tmp/stdin";; + -) ac_f="$ac_tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain `:'. @@ -15230,7 +15182,7 @@ do [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || - as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;; + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; esac case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac as_fn_append ac_file_inputs " '$ac_f'" @@ -15256,8 +15208,8 @@ $as_echo "$as_me: creating $ac_file" >&6;} esac case $ac_tag in - *:-:* | *:-) cat >"$tmp/stdin" \ - || as_fn_error "could not create $ac_file" "$LINENO" 5 ;; + *:-:* | *:-) cat >"$ac_tmp/stdin" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; esac ;; esac @@ -15382,23 +15334,24 @@ s&@abs_builddir@&$ac_abs_builddir&;t t s&@abs_top_builddir@&$ac_abs_top_builddir&;t t $ac_datarootdir_hack " -eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ - || as_fn_error "could not create $ac_file" "$LINENO" 5 +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ + >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && + { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ + "$ac_tmp/out"`; test -z "$ac_out"; } && { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined." >&5 +which seems to be undefined. Please make sure it is defined" >&5 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined." >&2;} +which seems to be undefined. Please make sure it is defined" >&2;} - rm -f "$tmp/stdin" + rm -f "$ac_tmp/stdin" case $ac_file in - -) cat "$tmp/out" && rm -f "$tmp/out";; - *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; + -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; + *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; esac \ - || as_fn_error "could not create $ac_file" "$LINENO" 5 + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; :H) # @@ -15407,21 +15360,21 @@ which seems to be undefined. Please make sure it is defined." >&2;} if test x"$ac_file" != x-; then { $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" - } >"$tmp/config.h" \ - || as_fn_error "could not create $ac_file" "$LINENO" 5 - if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" + } >"$ac_tmp/config.h" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 $as_echo "$as_me: $ac_file is unchanged" >&6;} else rm -f "$ac_file" - mv "$tmp/config.h" "$ac_file" \ - || as_fn_error "could not create $ac_file" "$LINENO" 5 + mv "$ac_tmp/config.h" "$ac_file" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 fi else $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ - || as_fn_error "could not create -" "$LINENO" 5 + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ + || as_fn_error $? "could not create -" "$LINENO" 5 fi ;; @@ -15436,7 +15389,7 @@ _ACEOF ac_clean_files=$ac_clean_files_save test $ac_write_fail = 0 || - as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5 + as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 # configure is writing to config.log, and then calls config.status. @@ -15457,7 +15410,7 @@ if test "$no_create" != yes; then exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. - $ac_cs_success || as_fn_exit $? + $ac_cs_success || as_fn_exit 1 fi # @@ -15598,7 +15551,7 @@ $as_echo "$as_me: running $SHELL $ac_sub_configure $ac_sub_configure_args --cach # The eval makes quoting arguments work. eval "\$SHELL \"\$ac_sub_configure\" $ac_sub_configure_args \ --cache-file=\"\$ac_sub_cache_file\" --srcdir=\"\$ac_srcdir\"" || - as_fn_error "$ac_sub_configure failed for $ac_dir" "$LINENO" 5 + as_fn_error $? "$ac_sub_configure failed for $ac_dir" "$LINENO" 5 fi cd "$ac_popdir" diff --git a/deal.II/doc/readme-petsc-trilinos.html b/deal.II/doc/readme-petsc-trilinos.html index d99508a796..f04e4059ef 100644 --- a/deal.II/doc/readme-petsc-trilinos.html +++ b/deal.II/doc/readme-petsc-trilinos.html @@ -79,17 +79,6 @@ configuration.

-

- Note that in order to use PETSc with deal.II - with the current release version of deal.II - you will need to have at least PETSc version 2.3.0 installed, - earlier releases are no longer supported. There is no - correlation between deal.II version numbers - and PETSc version numbers. deal.II version - 7.0 has been tested up to PETSc release 3.1.0-p8, and newer version up - to at least PETSc release 3.2. -

-

There is an additional caveat: PETSc appears not to co-operate well when using threads and some programs crash when deal.II is diff --git a/deal.II/doc/readme.html b/deal.II/doc/readme.html index 6ea41e38ad..d7c95f8813 100644 --- a/deal.II/doc/readme.html +++ b/deal.II/doc/readme.html @@ -533,6 +533,11 @@ at the command line, or, here.

+ +

+ (deal.II) version 7.2 (and higher) support + PETSc 3.x.x only; earlier releases are no longer supported. +

@@ -595,7 +600,8 @@

(deal.II) version 7.2 (and higher) support - METIS 5.x.x only.
METIS is not needed when + METIS 5.x.x only; earlier releases are no longer + supported.
METIS is not needed when using p4est to parallelize programs, see below.