From: David Wells Date: Tue, 19 May 2015 15:40:11 +0000 (-0400) Subject: Use the standard Stokes equation in step-22. X-Git-Tag: v8.3.0-rc1~161^2~3 X-Git-Url: https://gitweb.dealii.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=fcf5de5531f05c355f142df5e686a6e0a360083c;p=dealii.git Use the standard Stokes equation in step-22. The usual formulation of the Cauchy stress tensor implies that there should be a factor of two in front of the diffusion (divergence of symmetric gradient) term. --- diff --git a/examples/step-22/doc/intro.dox b/examples/step-22/doc/intro.dox index e7cf3a57ed..089e909414 100644 --- a/examples/step-22/doc/intro.dox +++ b/examples/step-22/doc/intro.dox @@ -19,7 +19,7 @@ California Institute of Technology. This program deals with the Stokes system of equations which reads as follows in non-dimensionalized form: @f{eqnarray*} - -\textrm{div}\; \varepsilon(\textbf{u}) + \nabla p &=& \textbf{f}, + -2\; \textrm{div}\; \varepsilon(\textbf{u}) + \nabla p &=& \textbf{f}, \\ -\textrm{div}\; \textbf{u} &=& 0, @f} @@ -47,22 +47,6 @@ become clear once we discuss the weak form of the equations. The equations covered here fall into the class of vector-valued problems. A toplevel overview of this topic can be found in the @ref vector_valued module. -@note Different people mean different things when they talk about the Stokes -equations. We here adopt the convention of the solid mechanics community which -uses the symmetric gradient. This differs from the convention in the fluids -community by a factor of two since the fact that $\textrm{div}\; \textbf{u}=0$ -implies that $-\textrm{div}\; \varepsilon(\textbf{u}) = \frac 12 \Delta -\textbf{u}$. The equations above are therefore equivalent to -@f{eqnarray*} - -\frac 12 \Delta\textbf{u} + \nabla p &=& \textbf{f}, - \\ - -\textrm{div}\; \textbf{u} &=& 0. -@f} -The Stokes equations that the fluid dynamics community would refer to do not -have the factor $\frac 12$ in front. Depending on your viewpoint you may -therefore want to adjust the bilinear form in the program when building the -system matrix and preconditioner. -

Weak form

@@ -70,7 +54,7 @@ The weak form of the equations is obtained by writing it in vector form as @f{eqnarray*} \begin{pmatrix} - {-\textrm{div}\; \varepsilon(\textbf{u}) + \nabla p} + {-2\; \textrm{div}\; \varepsilon(\textbf{u}) + \nabla p} \\ {-\textrm{div}\; \textbf{u}} \end{pmatrix} @@ -86,7 +70,7 @@ function $\phi = \begin{pmatrix}\textbf v \\ q\end{pmatrix}$ and integrating over the domain $\Omega$, yielding the following set of equations: @f{eqnarray*} (\mathrm v, - -\textrm{div}\; \varepsilon(\textbf{u}) + \nabla p)_{\Omega} + -2\; \textrm{div}\; \varepsilon(\textbf{u}) + \nabla p)_{\Omega} - (q,\textrm{div}\; \textbf{u})_{\Omega} = @@ -98,7 +82,7 @@ which has to hold for all test functions $\phi = \begin{pmatrix}\textbf v In practice, one wants to impose as little regularity on the pressure variable as possible; consequently, we integrate by parts the second term: @f{eqnarray*} - (\mathrm v, -\textrm{div}\; \varepsilon(\textbf{u}))_{\Omega} + (\mathrm v, -2\; \textrm{div}\; \varepsilon(\textbf{u}))_{\Omega} - (\textrm{div}\; \textbf{v}, p)_{\Omega} + (\textbf{n}\cdot\textbf{v}, p)_{\partial\Omega} - @@ -108,9 +92,9 @@ variable as possible; consequently, we integrate by parts the second term: @f} Likewise, we integrate by parts the first term to obtain @f{eqnarray*} - (\nabla \mathrm v,\varepsilon(\textbf{u}))_{\Omega} + (\nabla \mathrm v, 2\; \varepsilon(\textbf{u}))_{\Omega} - - (\textbf{n} \otimes \mathrm v,\varepsilon(\textbf{u}))_{\partial\Omega} + (\textbf{n} \otimes \mathrm v, 2\; \varepsilon(\textbf{u}))_{\partial\Omega} - (\textrm{div}\; \textbf{v}, p)_{\Omega} + (\textbf{n}\cdot\textbf{v}, p)_{\partial\Omega} - @@ -121,9 +105,9 @@ Likewise, we integrate by parts the first term to obtain where the scalar product between two tensor-valued quantities is here defined as @f{eqnarray*} - (\nabla \mathrm v,\varepsilon(\textbf{u}))_{\Omega} + (\nabla \mathrm v, 2\; \varepsilon(\textbf{u}))_{\Omega} = - \int_\Omega \sum_{i,j=1}^d \frac{\partial v_j}{\partial x_i} + 2 \int_\Omega \sum_{i,j=1}^d \frac{\partial v_j}{\partial x_i} \varepsilon(\textbf{u})_{ij} \ dx. @f} Because the scalar product between a general tensor like @@ -132,9 +116,9 @@ $\varepsilon(\textbf{u})$ equals the scalar product between the symmetrized forms of the two, we can also write the bilinear form above as follows: @f{eqnarray*} - (\varepsilon(\mathrm v),\varepsilon(\textbf{u}))_{\Omega} + (\varepsilon(\mathrm v), 2\; \varepsilon(\textbf{u}))_{\Omega} - - (\textbf{n} \otimes \mathrm v,\varepsilon(\textbf{u}))_{\partial\Omega} + (\textbf{n} \otimes \mathrm v, 2\; \varepsilon(\textbf{u}))_{\partial\Omega} - (\textrm{div}\; \textbf{v}, p)_{\Omega} + (\textbf{n}\cdot\textbf{v}, p)_{\partial\Omega} - @@ -145,7 +129,7 @@ above as follows: We will deal with the boundary terms in the next section, but it is already clear from the domain terms @f{eqnarray*} - (\varepsilon(\mathrm v),\varepsilon(\textbf{u}))_{\Omega} + (\varepsilon(\mathrm v), 2\; \varepsilon(\textbf{u}))_{\Omega} - (\textrm{div}\; \textbf{v}, p)_{\Omega} - (q,\textrm{div}\; \textbf{u})_{\Omega} @@ -173,7 +157,7 @@ possibilities for imposing boundary conditions: and consequently that @f{eqnarray*} -(\textbf{n} \otimes \mathrm - v,\varepsilon(\textbf{u}))_{\Gamma_D} + v, 2\; \varepsilon(\textbf{u}))_{\Gamma_D} + (\textbf{n}\cdot\textbf{v}, p)_{\Gamma_D} = 0. @@ -191,46 +175,46 @@ possibilities for imposing boundary conditions: boundary terms as follows: @f{eqnarray*} -(\textbf{n} \otimes \mathrm - v,\varepsilon(\textbf{u}))_{\Gamma_N} + v, 2\; \varepsilon(\textbf{u}))_{\Gamma_N} + (\textbf{n}\cdot\textbf{v}, p)_{\Gamma_N} &=& \sum_{i,j=1}^d - -(n_i v_j,\varepsilon(\textbf{u})_{ij})_{\Gamma_N} + -(n_i v_j, 2\; \varepsilon(\textbf{u})_{ij})_{\Gamma_N} + \sum_{i=1}^d (n_i v_i, p)_{\Gamma_N} \\ &=& \sum_{i,j=1}^d - -(n_i v_j,\varepsilon(\textbf{u})_{ij})_{\Gamma_N} + -(n_i v_j, 2\; \varepsilon(\textbf{u})_{ij})_{\Gamma_N} + \sum_{i,j=1}^d (n_i v_j, p \delta_{ij})_{\Gamma_N} \\ &=& \sum_{i,j=1}^d - (n_i v_j,p \delta_{ij} - \varepsilon(\textbf{u})_{ij})_{\Gamma_N} + (n_i v_j,p \delta_{ij} - 2\; \varepsilon(\textbf{u})_{ij})_{\Gamma_N} \\ &=& (\textbf{n} \otimes \mathrm v, - p \textbf{1} - \varepsilon(\textbf{u}))_{\Gamma_N}. + p \textbf{1} - 2\; \varepsilon(\textbf{u}))_{\Gamma_N}. \\ &=& (\mathrm v, - \textbf{n}\cdot [p \textbf{1} - \varepsilon(\textbf{u})])_{\Gamma_N}. + \textbf{n}\cdot [p \textbf{1} - 2\; \varepsilon(\textbf{u})])_{\Gamma_N}. @f} In other words, on the Neumann part of the boundary we can prescribe values for the total stress: @f{eqnarray*} - \textbf{n}\cdot [p \textbf{1} - \varepsilon(\textbf{u})] + \textbf{n}\cdot [p \textbf{1} - 2\; \varepsilon(\textbf{u})] = \textbf g_N \qquad\qquad \textrm{on}\ \Gamma_N. @f} If the boundary is subdivided into Dirichlet and Neumann parts $\Gamma_D,\Gamma_N$, this then leads to the following weak form: @f{eqnarray*} - (\varepsilon(\mathrm v),\varepsilon(\textbf{u}))_{\Omega} + (\varepsilon(\mathrm v), 2\; \varepsilon(\textbf{u}))_{\Omega} - (\textrm{div}\; \textbf{v}, p)_{\Omega} - (q,\textrm{div}\; \textbf{u})_{\Omega} @@ -244,13 +228,13 @@ possibilities for imposing boundary conditions:
  • Robin-type boundary conditions: Robin boundary conditions are a mixture of Dirichlet and Neumann boundary conditions. They would read @f{eqnarray*} - \textbf{n}\cdot [p \textbf{1} - \varepsilon(\textbf{u})] + \textbf{n}\cdot [p \textbf{1} - 2\; \varepsilon(\textbf{u})] = \textbf S \textbf u \qquad\qquad \textrm{on}\ \Gamma_R, @f} with a rank-2 tensor (matrix) $\textbf S$. The associated weak form is @f{eqnarray*} - (\varepsilon(\mathrm v),\varepsilon(\textbf{u}))_{\Omega} + (\varepsilon(\mathrm v), 2\; \varepsilon(\textbf{u}))_{\Omega} - (\textrm{div}\; \textbf{v}, p)_{\Omega} - (q,\textrm{div}\; \textbf{u})_{\Omega} @@ -272,7 +256,7 @@ possibilities for imposing boundary conditions: @f{eqnarray*} \textbf u_{\textbf t} &=& 0, \\ - \textbf n \cdot \left(\textbf{n}\cdot [p \textbf{1} - + \textbf n \cdot \left(\textbf{n}\cdot [p \textbf{1} - 2\; \varepsilon(\textbf{u})] \right) &=& 0. @@ -293,7 +277,7 @@ possibilities for imposing boundary conditions: \textbf{n}\cdot\textbf u &=& 0, \\ (\textbf 1-\textbf n\otimes\textbf n) - \left(\textbf{n}\cdot [p \textbf{1} - + \left(\textbf{n}\cdot [p \textbf{1} - 2\; \varepsilon(\textbf{u})] \right) &=& 0, @@ -314,7 +298,7 @@ boundary conditions on $\Gamma_D$ and $\Gamma_N$ reads like this: find $\textbf u\in \textbf V_g = \{\varphi \in H^1(\Omega)^d: \varphi_{\Gamma_D}=\textbf g_D\}, p\in Q=L^2(\Omega)$ so that @f{eqnarray*} - (\varepsilon(\mathrm v),\varepsilon(\textbf{u}))_{\Omega} + (\varepsilon(\mathrm v), 2\; \varepsilon(\textbf{u}))_{\Omega} - (\textrm{div}\; \textbf{v}, p)_{\Omega} - (q,\textrm{div}\; \textbf{u})_{\Omega} @@ -346,7 +330,7 @@ pressures. This then leads to the following discrete problem: find $\textbf u_h,p_h$ so that @f{eqnarray*} - (\varepsilon(\mathrm v_h),\varepsilon(\textbf u_h))_{\Omega} + (\varepsilon(\mathrm v_h), 2\; \varepsilon(\textbf u_h))_{\Omega} - (\textrm{div}\; \textbf{v}_h, p_h)_{\Omega} - (q_h,\textrm{div}\; \textbf{u}_h)_{\Omega} @@ -584,7 +568,7 @@ from below. Without trying to be entirely realistic, we model this situation by solving the following set of equations and boundary conditions on the domain $\Omega=[-2,2]\times[0,1]\times[-1,0]$: @f{eqnarray*} - -\textrm{div}\; \varepsilon(\textbf{u}) + \nabla p &=& 0, + -2\; \textrm{div}\; \varepsilon(\textbf{u}) + \nabla p &=& 0, \\ -\textrm{div}\; \textbf{u} &=& 0, \\ @@ -603,7 +587,7 @@ domain $\Omega=[-2,2]\times[0,1]\times[-1,0]$: \end{array}\right) \qquad\qquad \textrm{at}\ z=0, x=0, @f} -and using natural boundary conditions $\textbf{n}\cdot [p \textbf{1} - +and using natural boundary conditions $\textbf{n}\cdot [p \textbf{1} - 2 \varepsilon(\textbf{u})] = 0$ everywhere else. In other words, at the left part of the top surface we prescribe that the fluid moves with the continental plate to the left at speed $-1$, that it moves to the right on the diff --git a/examples/step-22/step-22.cc b/examples/step-22/step-22.cc index fabd908c85..78319b8c3b 100644 --- a/examples/step-22/step-22.cc +++ b/examples/step-22/step-22.cc @@ -645,7 +645,7 @@ namespace Step22 { for (unsigned int j=0; j<=i; ++j) { - local_matrix(i,j) += (symgrad_phi_u[i] * symgrad_phi_u[j] + local_matrix(i,j) += (2 * (symgrad_phi_u[i] * symgrad_phi_u[j]) - div_phi_u[i] * phi_p[j] - phi_p[i] * div_phi_u[j] + phi_p[i] * phi_p[j]) diff --git a/tests/benchmarks/test_assembly/step-22.cc b/tests/benchmarks/test_assembly/step-22.cc index 97d0c8629d..5287edc626 100644 --- a/tests/benchmarks/test_assembly/step-22.cc +++ b/tests/benchmarks/test_assembly/step-22.cc @@ -868,7 +868,7 @@ namespace Step22 { for (unsigned int j=0; j<=i; ++j) { - local_matrix(i,j) += (symgrad_phi_u[i] * symgrad_phi_u[j] + local_matrix(i,j) += (2 * symgrad_phi_u[i] * symgrad_phi_u[j] - div_phi_u[i] * phi_p[j] - phi_p[i] * div_phi_u[j] + phi_p[i] * phi_p[j])