From: David Wells Date: Sun, 13 Nov 2022 21:06:21 +0000 (-0500) Subject: Optimize BlockSparsityPatternBase::add_entries(). X-Git-Tag: v9.5.0-rc1~856^2 X-Git-Url: https://gitweb.dealii.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=refs%2Fpull%2F14398%2Fhead;p=dealii.git Optimize BlockSparsityPatternBase::add_entries(). We can avoid some expensive parts and looping over data more than once by utilizing the fact that the DoFs are sorted, which implies that they are also sorted by block. --- diff --git a/include/deal.II/lac/block_sparsity_pattern.h b/include/deal.II/lac/block_sparsity_pattern.h index 469c84bc45..7436000291 100644 --- a/include/deal.II/lac/block_sparsity_pattern.h +++ b/include/deal.II/lac/block_sparsity_pattern.h @@ -840,81 +840,132 @@ BlockSparsityPatternBase::add_entries( Assert(n_rows() == compute_n_rows(), ExcNeedsCollectSizes()); Assert(n_cols() == compute_n_cols(), ExcNeedsCollectSizes()); - // Resize scratch arrays - if (block_column_indices.size() < n_block_cols()) - { - block_column_indices.resize(n_block_cols()); - counter_within_block.resize(n_block_cols()); - } + const size_type n_cols = static_cast(end - begin); - const size_type n_added_cols = static_cast(end - begin); - - // Resize sub-arrays to n_added_cols. This - // is a bit wasteful, but we resize - // only a few times (then the maximum - // row length won't increase that - // much any more). At least we know - // that all arrays are going to be of - // the same size, so we can check - // whether the size of one is large - // enough before actually going - // through all of them. - if (block_column_indices[0].size() < n_added_cols) - for (size_type i = 0; i < this->n_block_cols(); ++i) - block_column_indices[i].resize(n_added_cols); - - // Reset the number of added elements - // in each block to zero. - for (size_type i = 0; i < this->n_block_cols(); ++i) - counter_within_block[i] = 0; - - // Go through the column indices to - // find out which portions of the - // values should be set in which - // block of the matrix. We need to - // touch all the data, since we can't - // be sure that the data of one block - // is stored contiguously (in fact, - // indices will be intermixed when it - // comes from an element matrix). - for (ForwardIterator it = begin; it != end; ++it) + if (indices_are_sorted && n_cols > 0) { - const size_type col = *it; - - const std::pair col_index = - this->column_indices.global_to_local(col); - - const size_type local_index = counter_within_block[col_index.first]++; - - block_column_indices[col_index.first][local_index] = col_index.second; - } - + block_column_indices[0].resize(0); + + const std::pair row_index = + this->row_indices.global_to_local(row); + const auto n_blocks = column_indices.size(); + + // Assume we start with the first block: since we assemble sparsity + // patterns one cell at a time this should always be true + size_type current_block = 0; + size_type current_start_index = column_indices.block_start(current_block); + size_type next_start_index = + current_block == n_blocks - 1 ? + numbers::invalid_dof_index : + column_indices.block_start(current_block + 1); + + for (auto it = begin; it < end; ++it) + { + // BlockIndices::global_to_local() is a bit slow so instead we just + // keep track of which block we are in - as the indices are sorted we + // know that the block number can only increase. + if (*it >= next_start_index) + { + // we found a column outside the present block: write the present + // block entries and continue to the next block + sub_objects[row_index.first][current_block]->add_entries( + row_index.second, + block_column_indices[0].begin(), + block_column_indices[0].end(), + true); + block_column_indices[0].clear(); + + auto block_and_col = column_indices.global_to_local(*it); + current_block = block_and_col.first; + current_start_index = column_indices.block_start(current_block); + next_start_index = + current_block == n_blocks - 1 ? + numbers::invalid_dof_index : + column_indices.block_start(current_block + 1); + } + const size_type local_index = *it - current_start_index; + block_column_indices[0].push_back(local_index); + + // Check that calculation: #ifdef DEBUG - // If in debug mode, do a check whether - // the right length has been obtained. - size_type length = 0; - for (size_type i = 0; i < n_block_cols(); ++i) - length += counter_within_block[i]; - Assert(length == n_added_cols, ExcInternalError()); + { + auto check_block_and_col = column_indices.global_to_local(*it); + Assert(current_block == check_block_and_col.first, + ExcInternalError()); + Assert(local_index == check_block_and_col.second, + ExcInternalError()); + } #endif + } + // add whatever is left over: + sub_objects[row_index.first][current_block]->add_entries( + row_index.second, + block_column_indices[0].begin(), + block_column_indices[0].end(), + true); - // Now we found out about where the - // individual columns should start and - // where we should start reading out - // data. Now let's write the data into - // the individual blocks! - const std::pair row_index = - this->row_indices.global_to_local(row); - for (size_type block_col = 0; block_col < n_block_cols(); ++block_col) + return; + } + else { - if (counter_within_block[block_col] == 0) - continue; - sub_objects[row_index.first][block_col]->add_entries( - row_index.second, - block_column_indices[block_col].begin(), - block_column_indices[block_col].begin() + - counter_within_block[block_col], - indices_are_sorted); + // Resize sub-arrays to n_cols. This + // is a bit wasteful, but we resize + // only a few times (then the maximum + // row length won't increase that + // much any more). At least we know + // that all arrays are going to be of + // the same size, so we can check + // whether the size of one is large + // enough before actually going + // through all of them. + if (block_column_indices[0].size() < n_cols) + for (size_type i = 0; i < this->n_block_cols(); ++i) + block_column_indices[i].resize(n_cols); + + // Reset the number of added elements + // in each block to zero. + for (size_type i = 0; i < this->n_block_cols(); ++i) + counter_within_block[i] = 0; + + // Go through the column indices to + // find out which portions of the + // values should be set in which + // block of the matrix. We need to + // touch all the data, since we can't + // be sure that the data of one block + // is stored contiguously (in fact, + // indices will be intermixed when it + // comes from an element matrix). + for (ForwardIterator it = begin; it != end; ++it) + { + const size_type col = *it; + + const std::pair col_index = + this->column_indices.global_to_local(col); + + const size_type local_index = counter_within_block[col_index.first]++; + + block_column_indices[col_index.first][local_index] = col_index.second; + } + + // Now we found out about where the + // individual columns should start and + // where we should start reading out + // data. Now let's write the data into + // the individual blocks! + const std::pair row_index = + this->row_indices.global_to_local(row); + for (size_type block_col = 0; block_col < n_block_cols(); ++block_col) + { + if (counter_within_block[block_col] == 0) + continue; + sub_objects[row_index.first][block_col]->add_entries( + row_index.second, + block_column_indices[block_col].begin(), + block_column_indices[block_col].begin() + + counter_within_block[block_col], + indices_are_sorted); + } } } diff --git a/source/lac/block_sparsity_pattern.cc b/source/lac/block_sparsity_pattern.cc index 676f9d5141..0acb1384ff 100644 --- a/source/lac/block_sparsity_pattern.cc +++ b/source/lac/block_sparsity_pattern.cc @@ -155,6 +155,10 @@ BlockSparsityPatternBase::collect_sizes() // finally initialize the row // indices with this array column_indices.reinit(col_sizes); + + // Resize scratch arrays + block_column_indices.resize(n_block_cols()); + counter_within_block.resize(n_block_cols()); }