From eecea4cb4e13bac3ee427dbd70e85e148cb7ee9d Mon Sep 17 00:00:00 2001 From: bangerth Date: Fri, 4 Oct 2013 23:04:52 +0000 Subject: [PATCH] Last changes for the day. Good progress :-) git-svn-id: https://svn.dealii.org/trunk@31132 0785d39b-7218-0410-832d-ea1e28bc413d --- deal.II/examples/step-42/step-42.cc | 149 +++++++++++++++------------- 1 file changed, 78 insertions(+), 71 deletions(-) diff --git a/deal.II/examples/step-42/step-42.cc b/deal.II/examples/step-42/step-42.cc index 50980389d3..1c2f4603c2 100644 --- a/deal.II/examples/step-42/step-42.cc +++ b/deal.II/examples/step-42/step-42.cc @@ -660,12 +660,12 @@ namespace Step42 private: void make_grid (); void setup_system (); - void assemble_newton_system (const TrilinosWrappers::MPI::Vector &linearization_point); - void compute_nonlinear_residual (const TrilinosWrappers::MPI::Vector ¤t_solution); - void assemble_mass_matrix_diagonal (TrilinosWrappers::SparseMatrix &mass_matrix); - void update_solution_and_constraints (); void compute_dirichlet_constraints (); - void solve (); + void update_solution_and_constraints (); + void assemble_mass_matrix_diagonal (TrilinosWrappers::SparseMatrix &mass_matrix); + void assemble_newton_system (const TrilinosWrappers::MPI::Vector &linearization_point); + void compute_nonlinear_residual (const TrilinosWrappers::MPI::Vector &linearization_point); + void solve_newton_system (); void solve_newton (); void refine_grid (); void move_mesh (const TrilinosWrappers::MPI::Vector &_complete_displacement) const; @@ -1466,28 +1466,52 @@ namespace Step42 + // @sect4{PlasticityContactProblem::compute_nonlinear_residual} + + // The following function computes the nonlinear residual of the equation + // given the current solution (or any other linearization point). This + // is needed in the linear search algorithm where we need to try various + // linear combinations of previous and current (trial) solution to + // compute the (real, globalized) solution of the current Newton step. + // + // That said, in a slight abuse of the name of the function, it actually + // does significantly more. For example, it also computes the vector + // that corresponds to the Newton residual but without eliminating + // constrained degrees of freedom. We need this vector to compute contact + // forces and, ultimately, to compute the next active set. Likewise, by + // keeping track of how many quadrature points we encounter on each cell + // that show plastic yielding, we also compute the + // fraction_of_plastic_q_points_per_cell vector that we + // can later output to visualize the plastic zone. In both of these cases, + // the results are not necessary as part of the line search, and so we may + // be wasting a small amount of time computing them. At the same time, this + // information appears as a natural by-product of what we need to do here + // anyway, and we want to collect it once at the end of each Newton + // step, so we may as well do it here. + // + // The actual implementation of this function should be rather obvious: template void PlasticityContactProblem:: - compute_nonlinear_residual (const TrilinosWrappers::MPI::Vector ¤t_solution) + compute_nonlinear_residual (const TrilinosWrappers::MPI::Vector &linearization_point) { - QGauss quadrature_formula(fe.degree + 1); + QGauss quadrature_formula(fe.degree + 1); QGauss face_quadrature_formula(fe.degree + 1); FEValues fe_values(fe, quadrature_formula, update_values | update_gradients | - update_q_points | update_JxW_values); + update_JxW_values); FEFaceValues fe_values_face(fe, face_quadrature_formula, update_values | update_quadrature_points | update_JxW_values); - const unsigned int dofs_per_cell = fe.dofs_per_cell; - const unsigned int n_q_points = quadrature_formula.size(); + const unsigned int dofs_per_cell = fe.dofs_per_cell; + const unsigned int n_q_points = quadrature_formula.size(); const unsigned int n_face_q_points = face_quadrature_formula.size(); const EquationData::BoundaryForce boundary_force; - std::vector > boundary_force_values(n_face_q_points, + std::vector > boundary_force_values(n_face_q_points, Vector(dim)); Vector cell_rhs(dofs_per_cell); @@ -1496,42 +1520,34 @@ namespace Step42 const FEValuesExtractors::Vector displacement(0); - typename DoFHandler::active_cell_iterator cell = - dof_handler.begin_active(), endc = dof_handler.end(); - - unsigned int elast_points = 0; - unsigned int plast_points = 0; - double yield = 0; - unsigned int cell_number = 0; fraction_of_plastic_q_points_per_cell = 0; + typename DoFHandler::active_cell_iterator + cell = dof_handler.begin_active(), + endc = dof_handler.end(); + unsigned int cell_number = 0; for (; cell != endc; ++cell, ++cell_number) if (cell->is_locally_owned()) { fe_values.reinit(cell); cell_rhs = 0; - std::vector > strain_tensor(n_q_points); - fe_values[displacement].get_function_symmetric_gradients(current_solution, - strain_tensor); + std::vector > strain_tensors(n_q_points); + fe_values[displacement].get_function_symmetric_gradients(linearization_point, + strain_tensors); for (unsigned int q_point = 0; q_point < n_q_points; ++q_point) { SymmetricTensor<4, dim> stress_strain_tensor; const bool q_point_is_plastic - = constitutive_law.get_stress_strain_tensor(strain_tensor[q_point], + = constitutive_law.get_stress_strain_tensor(strain_tensors[q_point], stress_strain_tensor); if (q_point_is_plastic) - { - ++plast_points; - ++fraction_of_plastic_q_points_per_cell(cell_number); - } - else - ++elast_points; + ++fraction_of_plastic_q_points_per_cell(cell_number); for (unsigned int i = 0; i < dofs_per_cell; ++i) { - cell_rhs(i) -= (strain_tensor[q_point] + cell_rhs(i) -= (strain_tensors[q_point] * stress_strain_tensor * fe_values[displacement].symmetric_gradient(i, q_point) * fe_values.JxW(q_point)); @@ -1539,13 +1555,12 @@ namespace Step42 Tensor<1, dim> rhs_values; rhs_values = 0; cell_rhs(i) += (fe_values[displacement].value(i, q_point) - * rhs_values * fe_values.JxW(q_point)); + * rhs_values + * fe_values.JxW(q_point)); } } - for (unsigned int face = 0; - face < GeometryInfo::faces_per_cell; ++face) - { + for (unsigned int face = 0; face < GeometryInfo::faces_per_cell; ++face) if (cell->face(face)->at_boundary() && cell->face(face)->boundary_indicator() == 1) { @@ -1564,63 +1579,55 @@ namespace Step42 * fe_values_face.JxW(q_point)); } } - } cell->get_dof_indices(local_dof_indices); constraints_dirichlet_and_hanging_nodes.distribute_local_to_global(cell_rhs, local_dof_indices, newton_rhs); - for (unsigned int i = 0; i < dofs_per_cell; i++) + for (unsigned int i = 0; i < dofs_per_cell; ++i) newton_rhs_uncondensed(local_dof_indices[i]) += cell_rhs(i); } fraction_of_plastic_q_points_per_cell /= quadrature_formula.size(); newton_rhs.compress(VectorOperation::add); newton_rhs_uncondensed.compress(VectorOperation::add); - - const unsigned int sum_elast_points = Utilities::MPI::sum(elast_points, - mpi_communicator); - const unsigned int sum_plast_points = Utilities::MPI::sum(plast_points, - mpi_communicator); - pcout << " Number of elastic quadrature points: " << sum_elast_points - << " and plastic quadrature points: " << sum_plast_points - << std::endl; } -// @sect4{PlasticityContactProblem::solve} - -// In addition to step-41 we have -// to deal with the hanging node -// constraints. Again we also consider -// the locally_owned_dofs only by -// creating the vector distributed_solution. -// -// For the hanging nodes we have to apply -// the set_zero function to newton_rhs. -// This is necessary if a hanging node value x_0 -// has one neighbor which is in contact with -// value x_0 and one neighbor which is not with -// value x_1. This leads to an inhomogeneity -// constraint with value x_1/2 = gap/2 in the -// ConstraintMatrix. -// So the corresponding entries in the -// ride-hang-side are non-zero with a -// meaningless value. These values have to -// to set to zero. + // @sect4{PlasticityContactProblem::solve_newton_system} -// The rest of the function is similar to -// step-41 except that we use a FGMRES-solver -// instead of CG. For a very small hardening -// value gamma the linear system becomes -// almost semi definite but still symmetric. + // The last piece before we can discuss the actual Newton iteration + // on a single mesh is the solver for the linear systems. There are + // a couple of complications that slightly obscure the code, but + // mostly it is just setup then solve. Among the complications are: + // + // - For the hanging nodes we have to apply + // the ConstraintMatrix::set_zero function to newton_rhs. + // This is necessary if a hanging node with solution value $x_0$ + // has one neighbor with value $x_1$ which is in contact with the + // obstacle and one neighbor $x_2$ which is not in contact. Because + // the update for the former will be prescribed, the hanging node constraint + // will have an inhomogeneity and will look like $x_0 = x_1/2 + \text{gap}/2$. + // So the corresponding entries in the + // ride-hang-side are non-zero with a + // meaningless value. These values we have to + // to set to zero. + // - Like in step-40, we need to shuffle between vectors that do and do + // do not have ghost elements when solving or using the solution. + // + // The rest of the function is similar to step-40 and + // step-41 except that we use a BiCGStab solver + // instead of CG. This is due to the fact that for very small hardening + // parameters $\gamma$, the linear system becomes almost semidefinite though + // still symmetric. BiCGStab appears to have an easier time with such linear + // systems. template void - PlasticityContactProblem::solve () + PlasticityContactProblem::solve_newton_system () { TimerOutput::Scope t(computing_timer, "Solve"); @@ -1636,7 +1643,7 @@ namespace Step42 { TimerOutput::Scope t(computing_timer, "Solve: setup preconditioner"); - std::vector < std::vector > constant_modes; + std::vector > constant_modes; DoFTools::extract_constant_modes(dof_handler, ComponentMask(), constant_modes); @@ -1748,7 +1755,7 @@ namespace Step42 number_assemble_system += 1; pcout << " Solving system... " << std::endl; - solve(); + solve_newton_system(); TrilinosWrappers::MPI::Vector distributed_solution(locally_owned_dofs, mpi_communicator); distributed_solution = solution; -- 2.39.5